Bath and North East Somerset · England
Bath re-enamelling & resurfacing in Corston, Bath and North East Somerset
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Corston. Send pictures for a free, fixed quote.
- Resurfacing from £350
- An old resurfacing that’s failing
- A bath that stays dull however much you clean it
Bath re-enamelling in Corston, done in place
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. Common call-outs are for a roll-top that’s seen better days and enamel that’s lost its shine and feels rough, across basins & shower trays, acrylic baths and Victorian roll-tops.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Corston (BA2)
- Region
- Bath and North East Somerset
- Guarantee
- 12 months on all our work
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Looking after it afterwards
Simple care helps the repair last. Our advice:
- Don’t leave a chip unrepaired
- Keep suction mats out of the bath
- Repair dripping taps early
- Keep toiletries on a shelf rather than in the bath
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Towns and villages near Corston
Also in Corston
Prices and what affects them
Prices start from £350. Every quote is fixed and free. What we look at:
- What the surface is made of
- Previous DIY repairs that have to come out
- The size and number of damaged areas
- Doing more than one item at once
Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
How to get a fixed price
Photographing the damage takes a minute. Please include:
- What it’s made of, if you know
- One picture of the entire bath
- Natural light rather than flash
- Whether it’s been repaired or coated before
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
How it works
The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the job itself takes the best part of a day. At the end we talk you through how soon it can be used and how to care for it.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can generally be used the next day.
How to prepare
- Keep a parking space free if you can
- Mention any parking restrictions or tricky access
- Avoid using the area for a few hours before we arrive
How to get a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. You’ll get a fixed price, not an estimate.
Advice
About Corston
Corston is about 3 miles south-east of Keynsham, in Bath and North East Somerset. From the centre of Corston to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Corston is one of 136 towns and villages in Bath and North East Somerset we cover. Our nearest city page is Birmingham, about 78 miles away.
Our technicians cover all of the BA2 postcode area and the streets around it. Whether you live on The Orchard, Corston Lane and Cotton Mead or anywhere nearby, a technician can come to you. Nearby, we also work in Newton St Loe (1 mile south-east), Stanton Prior (2 miles south-west), Whiteway (2 miles south-east), Burnett (2 miles west) and Englishcombe (2 miles south-east). Larger places within reach include Bath (3 miles east), Keynsham (3 miles north-west), Bathwick (4 miles east), Walcot (4 miles east), Kingsmead (3 miles east) and Bear Flat (3 miles east).
Landmarks near Corston
Our clients here include homes close to The Globe Inn, Oldfield School and Church of All Saints, among other places. For rail, the closest station is Oldfield Park station, roughly 2.6 miles east. Nearby you will also find Royal United Hospital (2.1 miles east) and Beckfords Tower And Museum (2.9 miles north-east). Open spaces near Corston include Hunstrete Lake.
Common problems we fix in Corston
Enamel wears gradually. Years of cleaning, hard water and hot baths dull the surface, starting where water runs and sits.
It’s worth getting a quote if you see:
- Several chips and rust patches
- Stains that won’t shift
- An original cast iron bath that needs restoring
- An old resurfacing that is failing
What to look for in a quote
- How your room will be protected
- Whether there are any call-out or travel charges
- Aftercare advice
- Whether they match the colour on site
Your questions about bath re-enamelling in Corston
Do you charge for travel?
We don’t add a call-out fee. Your fixed quote includes everything.
Will the bath be moved?
No. We resurface it in place, so the tiles and taps stay put.
How long does re-enamelling take?
Generally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Corston.
How soon can you come?
That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Is there any odour?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
Do you work in Corston?
Yes. We cover the entire UK and come to Corston. Send pictures and we will quote, or call 0345 017 0787.
Repairing versus replacing in Corston
A new bath means a plumber, removing a heavy bath, making good the walls and tiles and several days without a working bathroom. Re-enamelling renews the entire surface without moving it. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Why book with us
- Work done at your home or business
- CHAS and Constructionline accredited
- Everything repaired in place
- Colour mixed on the day to match
Read our prices page or resurfacing vs replacement cost guide.
For landlords and businesses
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
About our accreditations · Every repair comes with a one-year guarantee.
