Pembrokeshire · Wales

Bath Re-enamelling in Cuffern

Full bath re-enamelling and resurfacing in Cuffern, carried out at your home and guaranteed for a year.

  • Resurfacing from £350
  • Lots of chips and rust spots
  • Wear marks under the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Cuffern

Looking after it afterwards

Once the work has cured, treat it gently:

  • Dry the bath after use to stop limescale
  • Do not use the bath until it has fully cured
  • Keep suction mats out of the bath
  • Have chips seen to early

Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.

If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.

How we handle bath re-enamelling in Cuffern

After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. We regularly repair pressed steel baths, basins & shower trays and cast iron baths, and the jobs we see most are chips and rust in more than one place and staining under the taps and around the waste.

All our work is covered by a one-year guarantee.

Stained basin resurfaced to clean white (before and after)
Area
Cuffern (SA62)
Area hub
Pembrokeshire
Cover
12 months on all our work
Quotes
From £350. Fixed and free, based on photos
Telephone
0345 017 0787
Page updated
23 October 2026

Common problems we fix in Cuffern

By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.

Send us a photo if you notice any of these:

  • Several chips and rust patches
  • An original cast iron bath that needs restoring
  • Thin, worn enamel in places
  • Stains that won’t shift

Comparing quotes

  • Whether they match the colour on site
  • What happens if they find more damage
  • When it can be used again
  • Whether the price is fixed and includes VAT

Our hiring checklist

The process

It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which usually takes most of the day. If we find something your photos didn’t show, we will explain it before carrying on.

  1. First we look the bath over and confirm the finish.
  2. Taps, tiles and the floor are masked off.
  3. We degrease the bath, fix any damage and key the surface.
  4. Primer and finish coats are applied.
  5. The masking comes off, we tidy up and tell you when it can be used.

How to prepare

  • Mention any parking restrictions or tricky access
  • Open a window if you can
  • Avoid using the area for a few hours before we arrive

How to get a price

For a price in Cuffern, the easiest route is photos: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.

Get a free quote

Related advice

When a repair isn’t the answer

A repair is not right for every job, including:

  • Leaking taps or wastes (a plumber’s job)
  • Holes rusted through the metal
  • A bath split right through the body

Not sure? Send pictures and we will give you a straight answer.

Surfaces we repair

  • Pressed steel baths
  • Acrylic baths
  • Basins & shower trays
  • Victorian roll-tops
  • Cast iron baths

About Cuffern

Cuffern is about 5 miles north-west of Haverfordwest, in Pembrokeshire. Wherever you are in the SA62 postcode area, we carry out the work at your property. We work in all 223 towns and villages across Pembrokeshire.

Our visits in SA62 are booked in the same way as anywhere else. Jobs here include addresses on East Moor Park and The Woodlands. If you are just outside Cuffern, we cover Roch (1 mile west), Simpson Cross (1 mile south), Keeston (1 mile south), Camrose (2 miles east) and Wolfsdale (2 miles east). Further out, we also cover Haverfordwest (5 miles south-east), Milford Haven (10 miles south), Pembroke (14 miles south-east), Pembroke Dock (12 miles south-east), The Marsh (5 miles south-east) and Fishguard (10 miles north).

Near you in Cuffern

We visit homes around Church of St Mary. Nearby you’ll also find Withybush General Hospital (4.8 miles south-east) and Roch Castle (1 mile west). Green spaces nearby include Roch Castle.

Map of Cuffern © OpenStreetMap contributors

Common questions in Cuffern

Will the price change on the day?

If we find something the photos didn’t show, we explain it first. The price only changes if you agree.

Is there a guarantee?

Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.

Do you cover Cuffern?

We do. Repair technicians travel to Cuffern from across the region, with no extra charge for travel.

Do you resurface freestanding baths?

Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.

I rent my home. Can I book you?

Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.

Is there a call-out fee?

No. Our quotes include travel, and we charge the same wherever you are.

Will you leave a mess?

We protect the room with dust sheets and masking first, and we clean up when we’ve finished.

Can you fix a peeling bath coating?

Generally, yes. The old coating comes off before we resurface it. Mention it when you send photos.

Landlord and trade work in Cuffern

Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.

We regularly work with letting and managing agents. Send the address, pictures and access details.

Should I try a DIY kit first?

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.

Why repair rather than replace?

A refit takes several trades and several days. Re-enamelling takes one technician and typically one day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. Our prices are the same across the UK, with no extra for Cuffern. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Why choose Surface Doctor in Cuffern

  • One-year guarantee on every repair
  • Work done at your home or business
  • Everything repaired in place
  • Free fixed quotes from pictures

Read our prices page and resurfacing vs replacement cost guide.

What bath re-enamelling costs

Resurfacing from £350. Prices are worked out job by job, from your photos. The main factors are:

  • Any earlier repairs that need removing first
  • How hard the colour is to match
  • How many items we do on one visit
  • Access to the area

What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed price from your pictures, so you know the cost before you book.

Quotes from your pictures

We price nearly every job from pictures. This is what to send:

  • Natural light rather than flash
  • A coin or ruler next to the damage for scale
  • One picture of the whole bath
  • A close-up of the damage, in focus

The quickest way to a price is to send a couple of photos through our quote form or ring us. We’ll say immediately whether it can be repaired.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.