Pembrokeshire · Wales
Bath Re-enamelling in Camrose
Our technicians come to Camrose for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Enamel that’s lost its shine and feels rough
What happens on the day
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job generally takes a full day. We tidy up before we leave and let you know when you can use it again.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Have somewhere for us to park nearby if possible
- Keep children and pets away from the room on the day
- Tell us about parking, stairs or access
Get a quote
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Advice
Bath re-enamelling at your home in Camrose
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Common call-outs are for an original cast iron bath that needs restoring and wear marks under the taps, on acrylic baths, cast iron baths and pressed steel baths.
You are covered after we leave: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Where
- Camrose (SA62)
- Area hub
- Pembrokeshire
- Guarantee
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What bath re-enamelling costs
Resurfacing from £350. We price every job individually. The main factors are:
- How much damage there is
- How many items we do on one visit
- Where the damage is and how we get to it
- Previous DIY repairs that have to come out
The price reflects the work involved, not where you live. You will see the full price before you book, with no extras added later.
Getting a price from photos
Phone pictures are fine, there’s no need for anything special. Ensure they show:
- Daylight if possible, and no flash reflection
- The material, if you know it
- The postcode, so we can plan the visit
- Details of any past repairs
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Aftercare tips
Nothing complicated is needed, just a few sensible habits:
- Wipe the bath dry after use in hard water areas
- Have chips seen to early
- Keep toiletries on a shelf rather than in the bath
- Clean with a soft cloth and mild detergent
Dry the bath after use if possible, especially in hard water areas, and rinse away any product left on the surface.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Covering Camrose
Camrose is about 3 miles north-west of Haverfordwest, in Pembrokeshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We work in 223 places across Pembrokeshire, from the larger towns to small villages.
We work across the SA62 postcode area. Jobs here include addresses on Honeysuckle Hollow, Plum Tree Drive and Little Cedar Drive. Other places close to Camrose include Wolfsdale (1 mile north-east), Pelcomb Cross (2 miles south), Keeston (2 miles south-west), Cuffern (2 miles west) and Pelcomb Bridge (2 miles south). Within a short drive, we also cover Haverfordwest (3 miles south-east), Milford Haven (9 miles south), Pembroke (12 miles south), Pembroke Dock (11 miles south), The Marsh (4 miles south-east) and Fishguard (10 miles north).
Near you in Camrose
Typical jobs here are in homes near Ye Olde Inn and Church Of St Ishmael, among other places. The closest station to Camrose is Haverfordwest station, roughly 3.6 miles south-east. Nearby you’ll also find Withybush General Hospital (3 miles south-east) and Camrose Castle (within half a mile south). Not far away are Dudwell Mountain.
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Towns and villages near Camrose
Also in Camrose
What we’re called out for in Camrose
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, normally first under the taps and around the waste.
If you can see any of these, send us a picture:
- A coloured bath you want in white
- Several chips and rust patches
- Stains that will not shift
- A bath that stays dull however much you clean it
What to look for in a quote
- Whether there are any call-out or travel charges
- How changes to the job are handled
- What the guarantee covers, and for how long
- How the colour is matched
Can I fix it myself?
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
When a repair isn’t the answer
Not everything can be repaired, and we’ll tell you before we start. We can’t fix:
- Holes rusted through the metal
- Problems we can’t see until an old finish comes off
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send photos and we’ll say what we think.
Materials we work on in Camrose
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
Camrose: your questions answered
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
Is it worth repairing rather than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Are there extra charges for Camrose?
There’s no separate call-out charge. Your fixed quote includes everything.
Do you work in Camrose?
Yes, we do. Repair technicians travel to Camrose from across the region, with no extra charge for travel.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Does re-enamelling smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
Repair or replace in Camrose?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why Camrose customers choose us
- We will tell you if it’s not worth repairing
- Colour mixed on the day to match
- No need to remove anything
- No extra charge for your area
See our full price list and bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
