Pembrokeshire · Wales
Bath re-enamelling & resurfacing in Wolfsdale, Pembrokeshire
Damaged bath in Wolfsdale? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- Enamel that’s lost its shine and feels rough
How it works
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, do the job and clear up. Plan for a full day from start to finish. Before leaving, we tell you how long to leave it and how to care for it.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Let us know which floor the room is on
- Clear toiletries, mats and anything else from around the area
- Mention any earlier repairs or resurfacing
Ask for a price
If you’re in Wolfsdale and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Related advice
Bath re-enamelling in Wolfsdale, done in place
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, and we take our time over it. We work on cast iron baths, pressed steel baths and basins & shower trays, and common reasons people get in touch are lots of chips and rust spots and a dull, rough surface that won’t come clean.
Every repair is covered by our one-year guarantee.
- Area
- Wolfsdale (SA62)
- Area hub
- Pembrokeshire
- Warranty
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace: which is better?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.
Why book with us
- One visit for most repairs
- No need to remove anything
- CHAS and Constructionline accredited
- Honest advice, even when it means no job
Take a look at our prices page or resurfacing vs replacement cost guide.
Wolfsdale and the surrounding area
Wolfsdale is about 4 miles north of Haverfordwest, in Pembrokeshire. We agree a date that works for you, and we will give you an arrival time in advance, so there’s no waiting around. We cover 223 places across Pembrokeshire.
We work across the SA62 postcode area and the streets around it. We also cover the places around Wolfsdale: Camrose (1 mile south-west), Cuffern (2 miles west), Pelcomb Cross (2 miles south), Brimaston (2 miles north) and Keeston (2 miles south-west). Further out, we also cover Haverfordwest (4 miles south), Milford Haven (10 miles south), Pembroke (13 miles south), Pembroke Dock (11 miles south), The Marsh (4 miles south-east) and Fishguard (10 miles north).
Local landmarks in Wolfsdale
Our customers here include homes close to Church Of St Ishmael, among other places. The nearest railway station is Haverfordwest station, about 4 miles south-east of the centre. Well-known places in the area include Withybush General Hospital (3.3 miles south-east) and Camrose Castle (1 mile south). Not far away are Dudwell Mountain.
FAQs for Wolfsdale
Can you resurface a pink bath in white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Is there a guarantee?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
How do I get a price for bath re-enamelling in Wolfsdale?
Prices start from £350. We give a fixed price based on photos of the damage. Send a close-up and a picture of the whole item and your postcode.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Do you cover the whole of Pembrokeshire?
All of Pembrokeshire, and the rest of the UK. Travel is included in the price.
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
How long does re-enamelling take?
Most baths are done in a day, ready the following day. We will confirm timings when we quote.
How to look after the repair
A little care keeps the finish looking good. We recommend:
- A quick wipe after use keeps limescale away
- Keep suction mats out of the bath
- Get any chip repaired quickly
- Respect the curing time we give you
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
How we price bath re-enamelling
Prices start from £350. Quotes are free and the price is fixed. What we take into account:
- What kind of damage it is
- Access to the area
- What the surface is made of
- How hard the colour is to match
Compared with replacing, repairing generally costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Getting a price from pictures
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- Your postcode, so we can check dates
- A coin or ruler next to the damage for scale
- A photo taken from further back
- Whether it’s been repaired or coated before
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and we will reply with a fixed price. Quotes are free and you’re under no obligation.
Landlords, agents and businesses in Wolfsdale
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
We are used to working with agents and managing companies. Just send pictures, the address and how to get access.
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Do you need bath re-enamelling in Wolfsdale?
Hard water speeds up the wear, and abrasive cleaners do the most damage.
Get in touch if you’ve noticed:
- A period or roll-top bath worth keeping
- An outdated colour you’d like to change
- A dull, rough surface that won’t come clean
- Thin, worn enamel in places
Comparing quotes
- What prep work is covered
- How soon you can use it again
- Whether the price is fixed and includes VAT
- What the guarantee covers, and for how long
Places near Wolfsdale
What else we do in Wolfsdale
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
About our accreditations · Every repair comes with a one-year guarantee.
