Cumbria · England
Bath re-enamelling & resurfacing in Downfield, Cumbria
Local bath re-enamelling for Downfield: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A coloured bath you want in white
- A bath that stays dull however much you clean it
What we cannot put right
Some problems need a builder, plumber or fitter rather than us:
- Holes rusted through the metal
- Acrylic that moves when you stand in it
- Leaks from fittings rather than the bath
Send us pictures and we will tell you honestly before you book.
Materials we repair
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
Bath re-enamelling in Downfield, done in place
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Our technicians work on acrylic baths, Victorian roll-tops and pressed steel baths, and the jobs we see most are a roll-top that’s seen better days and a dull, rough surface that won’t come clean.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Downfield (LA12)
- County
- Cumbria
- Guarantee
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Also in Downfield
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.
Why repair rather than replace?
Replacing a bath normally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and typically one day, and the bath can be used the day after. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
Why choose Surface Doctor in Downfield
- Colour mixed on the day to match
- Fixed prices from your photos
- One price list for the whole UK
- One-year guarantee on every repair
Read our pricing and bath cost comparison.
What we do, step by step
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, do the job and clear up. Allow a full day. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Mention any parking restrictions or tricky access
- Avoid using the area for a few hours before we arrive
Ask for a price
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and we’ll reply with a fixed price. There is no charge for the quote and no obligation.
Read more
About Downfield
Downfield is about 3 miles east of Barrow-in-Furness, in Cumbria. Anywhere in LA12, a technician comes to you. Downfield is one of 438 towns and villages in Cumbria where we work. You can also see our page for Liverpool, about 49 miles away.
Our visits in LA12 work the same way as everywhere else we cover. We also cover the places around Downfield: Leece (1 mile north-west), Dendron (1 mile north), Newbiggin (1 mile east), Gleaston (1 mile north) and Stank (1 mile north-west). Larger places within reach include Barrow-in-Furness (3 miles west), Ulverston (6 miles north), Hindpool (3 miles west), Salthouse (3 miles west), Dalton-in-Furness (3 miles north) and Vickerstown (4 miles west).
What’s near Downfield
Typical jobs here are in homes near Church of St Matthew and Barrow-in-Furness Sixth Form College. Downfield’s nearest station is Roose station, about 1.9 miles west. Further afield, we also cover the area around Furness Abbey Museum (2.7 miles north-west) and Piel Castle (3.5 miles south). The countryside around Downfield includes Urswick Tarn and North Walney.
Aftercare tips
A little care keeps the finish looking good. We recommend:
- Wash away dyes and oils after use
- Use washing-up liquid and a soft cloth
- A quick wipe after use keeps limescale away
- Get any chip repaired quickly
Wipe the bath dry after use where you can, particularly with hard water, and rinse off any bath products.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
Prices and what affects them
Prices start from £350. We do not charge extra for travel to Downfield. The price comes down to:
- Whether it’s a chip, crack, burn or wear
- How many items we do on one visit
- The material and finish
- How much damage there is
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Send photos for a quote
We price nearly every job from photos. This is what we need:
- A coin beside the damage so we can judge size
- A picture taken from further back
- Daylight if possible, and no flash reflection
- Any details about the material
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price.
Questions from Downfield
How long does re-enamelling last?
Care for it and it lasts. Gentle cleaning, no suction mats.
Someone resurfaced my bath and it’s peeling. Can you help?
Generally, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
How quickly can you book me in?
We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Does re-enamelling smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
How long is the bath unusable?
Typically one day, with the bath ready the following day. A badly pitted bath can need a second day.
Can you quote from pictures?
Normally, yes. Clear pictures let us give you a fixed quote without visiting.
What does bath re-enamelling cost?
Resurfacing from £350. We give a fixed quote from your photos. Send a close-up of the damage and a wider photo and your postcode.
Is there any odour?
Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
About our accreditations · Every repair comes with a one-year guarantee.
