North Yorkshire · England
Bath re-enamelling & resurfacing in East Marton, North Yorkshire
Our repair technicians come to East Marton for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- An old resurfacing that’s failing
- A bath that stays dull however much you clean it
Bath re-enamelling in East Marton, done in place
A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It suits anyone happy with the bathroom apart from the bath. If you are dealing with brown or grey marks that don’t clean off and lots of chips and rust spots, we can normally put it right, on basins & shower trays, acrylic baths and Victorian roll-tops alike.
Big or small, it’s backed by a one-year guarantee.
- Area
- East Marton (BD23)
- Area hub
- North Yorkshire
- Guarantee
- 12 months on all our work
- Price
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
If you do try a kit, read the instructions carefully, and give it the full curing time. If it does not work out, we can still repair it properly.
Honest limits
We will always be straight with you, so here’s what a repair won’t do:
- A metal bath with a through crack
- Problems we can’t see until an old finish comes off
- A poorly supported acrylic bath, until it’s firmed up
Send us pictures and we will tell you honestly before booking.
Materials we work on in East Marton
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
East Marton and the surrounding area
East Marton is about 3 miles north-east of Barnoldswick, in North Yorkshire. Clients in East Marton get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. Our technicians cover all 626 towns and villages in North Yorkshire, from the larger towns to small villages. Our jobs stretch from East Marton to Leeds (26 miles away).
We cover every part of the BD23 postcode area and the streets around it. Other places close to East Marton include West Marton (1 mile west), Thornton-in-Craven (1 mile south), Elslack (2 miles south-east), Coates (2 miles south-west) and Earby (3 miles south). Within a short drive, we also cover Skipton (5 miles east), Settle (10 miles north-west), Grassington (10 miles north-east), Embsay (7 miles east), Giggleswick (10 miles north-west) and Carleton-in-Craven (4 miles east).
What’s near East Marton
Typical jobs here are in homes near Church of St Peter and Cross Keys Public House and the streets around them. For rail, the closest station is Gargrave station, roughly 2.3 miles north-east. Nearby you will also find Bancroft Shed (3.5 miles south-west) and Raikeswood Hospital (4.9 miles east). Not far away are Sharp Haw.
Places near East Marton
Also in East Marton
FAQs for East Marton
Is my repair covered?
All our work carries our one-year guarantee. We’ll explain what it covers when we quote.
Are there extra charges for East Marton?
Travel is included in the price, and we charge the same wherever you are.
Do you resurface freestanding baths?
Yes. Inside and out if you’d like.
What happens after I send photos?
We look at the pictures and reply with a fixed quote and some dates. If we need another angle, we will ask.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
What if the damage is worse than the photos show?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
Is there a smell?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
How long does re-enamelling take?
Generally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
What bath re-enamelling costs
Prices start from £350. You’ll know the full cost before booking. We look at:
- Whether we combine several jobs
- The material
- Whether it’s a chip, crack, burn or wear
- Whether old repairs or coatings need taking off
The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed price from your photos, so you know the cost before booking.
Getting a price from photos
Phone photos are fine. Just make sure we can see:
- A close-up of the damage, in focus
- What it’s made of, if you know
- Your postcode, so we can check dates
- Details of any past repairs
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Why repair rather than replace?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, with the bath ready the following day. Prices start from £350. A repair is priced on what needs doing, not where you live. The full price is agreed before booking, with no extras added later.
Why East Marton clients choose us
- Colour-matched on site
- No extra charge for your area
- Dust sheets down, tidy finish
- Everything repaired in place
Take a look at our pricing and resurfacing vs replacement cost guide.
Landlords, agents and businesses in East Marton
If you manage property in East Marton, we can repair and quote for several addresses together. Send pictures for each one and we’ll price them together.
Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
What happens on the day
We work cleanly and quietly. Protection goes down first, then the job itself takes most of the day. Before we leave, we explain how soon it can be used and how to care for it.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s usually ready the following day.
Preparing for the visit
- Point us to the nearest place to park
- Tell us about parking, stairs or access
- Tell us about any previous repairs or coatings
Get a quote
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Related advice
What we’re called out for in East Marton
Older baths frequently have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Keep an eye out for these signs:
- Brown or grey marks that do not clean off
- A dull, rough surface that will not come clean
- An original cast iron bath that needs restoring
- Thin, worn enamel in places
Questions to ask before you book
- How soon you can use it again
- What the guarantee covers, and for how long
- How your room will be protected
- Who will actually do the work
About our accreditations · Every repair comes with a one-year guarantee.
