Shropshire · England
Bath Re-enamelling in Homer
Local bath re-enamelling for Homer: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- A coloured bath you want in white
Landlords, agents and businesses in Homer
If you manage property in Homer, we can repair and quote for several addresses together. Send pictures for each one and we’ll come back with a combined price.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
Bath re-enamelling in Homer, done in place
Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the whole bath is tired rather than one spot. We work on acrylic baths, cast iron baths and basins & shower trays, and common reasons people contact us are a coloured bath you want in white and a bath that stays dull however much you clean it.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Where
- Homer (TF13)
- County
- Shropshire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Where we work around Homer
Homer is about 7 miles south-west of Telford, in Shropshire. We agree a date that works for you, and you will know when to expect us, so there’s no waiting around. Homer is one of 433 towns and villages in Shropshire where we work. You can also see our page for Birmingham, about 30 miles away.
Our visits in TF13 work the same way as everywhere else we cover. From The Glen and Copse Hill Lane or anywhere nearby, a technician can come to you. Other places close to Homer include Farley (1 mile north-east), Wyke (2 miles east), Posenhall (2 miles east), Buildwas (2 miles north-east) and Leighton (2 miles north). Within a short drive, we also cover Shrewsbury (10 miles north-west), Madeley (5 miles east), Bridgnorth (8 miles south-east), Coleham (10 miles north-west), Kingsland (10 miles north-west) and Belle Vue (10 miles north-west).
Local landmarks in Homer
We visit homes around Church of Holy Trinity, William Brookes School and William Brookes School. A little further out are Much Wenlock Museum (1 mile south).
Different materials, different repairs
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
Do you need bath re-enamelling in Homer?
Enamel wears gradually. Years of cleaning, hard water and hot baths wear the gloss away, starting where water runs and sits.
These are the problems we are asked about most:
- Brown or grey marks that don’t clean off
- A dull, rough surface that won’t come clean
- A period or roll-top bath worth keeping
- An outdated colour you’d like to change
What your quote should include
- How long it needs to cure
- Who turns up on the day
- Is the price fixed, and does it include VAT?
- How the room is protected while they work
What we cannot put right
It helps to know what we cannot do:
- An acrylic bath that flexes badly underfoot
- Leaking taps or wastes (a plumber’s job)
- Anything hidden under an old coating, until we remove it
Not sure? Send pictures and we’ll give you a straight answer.
Surfaces we repair
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Basins & shower trays
What we do, step by step
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes a full day, and we finish with a tidy-up and a look at the finished work together.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Clear the area around the damage
- Point us to the nearest place to park
- Avoid using the area for a few hours before we arrive
Get a quote
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Read more
Homer questions
Do you need to take the bath out?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
How long does re-enamelling take?
Normally one day, with the bath ready the next day. Deeply pitted baths may need a second day.
Is my repair covered?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside if you’d like.
Do you work in Homer?
Yes. We work across the UK and come to Homer and the rest of Shropshire. Send pictures and we’ll quote, or call 0345 017 0787.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Does re-enamelling smell?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
Will the new finish last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Keeping it looking good
Much of the damage we repair could have been avoided. A few tips:
- Keep toiletries on a shelf rather than in the bath
- Keep suction mats out of the bath
- Leave the bath for the full curing time before using it
- Stick to gentle, non-abrasive cleaners
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Also in Homer
How we price bath re-enamelling
Resurfacing from £350. You will know the full cost before booking. We look at:
- Whether we combine several jobs
- The material
- The type of damage
- Any earlier repairs that need removing first
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
How to get a fixed price
Phone photos are fine, there’s no need for anything special. Make sure they show:
- What it’s made of, if you know
- A coin or ruler next to the damage for scale
- Your postcode, so we can check dates
- Whether it’s been repaired or coated before
If you are in Homer and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
About our accreditations · Every repair comes with a one-year guarantee.
