Derbyshire · England

Bath re-enamelling & resurfacing in Ellastone, Derbyshire

Damaged bath in Ellastone? We repair it in place, match it on site and guarantee the work for a year.

  • Resurfacing from £350
  • A roll-top that’s seen better days
  • A coloured bath you want in white
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Ellastone

Aftercare tips

How the surface is treated afterwards matters. Here’s what we suggest:

  • Do not leave a chip unrepaired
  • Keep suction mats out of the bath
  • Fix dripping taps quickly
  • A quick wipe after use keeps limescale away

The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.

Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.

How we handle bath re-enamelling in Ellastone

A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. Typical jobs include wear marks under the taps and a bath that stays dull however much you clean it, in cast iron baths, acrylic baths and pressed steel baths.

Whatever the size of the job, you get the same one-year guarantee.

Technician in a mask working on a freestanding roll-top bath
Where
Ellastone (DE6)
Region
Derbyshire
Cover
One year on every repair
Price
From £350. Free and fixed, from your pictures
Telephone
0345 017 0787
Last updated
23 October 2026

Landlord and trade work in Ellastone

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.

What your bath is made of matters

Roll-top and period baths

Freestanding roll-tops can be done inside and out, with the outside refinished as well.

Cast iron

A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.

Signs you need bath re-enamelling in Ellastone

By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Resurfacing sorts them out together.

If you can see any of these, send us a photo:

  • A dull, rough surface that won’t come clean
  • An old resurfacing that’s failing
  • Stains that won’t shift
  • Wear marks under the taps

Comparing quotes

  • How long it needs to cure
  • What prep work is covered
  • Who turns up on the day
  • Whether they match the colour on site

Choosing a repair company

Prices and what affects them

Prices start from £350. You will not pay by the hour. The price is based on:

  • How easy the damage is to reach
  • The size and number of damaged areas
  • Previous DIY repairs that have to come out
  • How many items we do on one visit

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.

Getting a price from pictures

Before you send pictures, a few simple things make all the difference:

  • A coin or ruler next to the damage for scale
  • Where you are, by postcode
  • Natural light rather than flash
  • Any details about the material

If you are in Ellastone and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.

Ellastone and nearby

Ellastone is about 6 miles north of Uttoxeter, in Derbyshire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Our repair technicians cover all 532 towns and villages across Derbyshire. Our jobs stretch from Ellastone to Birmingham (about 36 miles away).

Postcode districts we cover here: DE6. Jobs here include addresses on Church Lane, Michael's Lane and Northwood Lane. If you’re just outside Ellastone, we cover Norbury (1 mile south), Prestwood (1 mile south-west), Roston (2 miles south-east), Denstone (2 miles south-west) and Rocester (3 miles south). Larger places within reach include Belper (15 miles east), Ashbourne (4 miles east), Hilton (12 miles south-east), Darley Dale (15 miles north-east), Wirksworth (12 miles north-east) and Duffield (14 miles east).

Around Ellastone

Around Ellastone, we work in homes near Church of St Peter and The Duncombe Arms, among other places. Other landmarks nearby include Alton Castle (2.9 miles west) and St Oswalds Hospital (3.9 miles north-east). For a walk, there’s Thorswood.

Map of Ellastone © OpenStreetMap contributors

What we do, step by step

Here’s how a visit generally runs: we arrive at the agreed slot, protect everything around the work area, do the job and tidy away. Plan for the best part of a day from start to finish. Before we go, we’ll explain when it can be used and how to care for it.

  1. We sheet, mask and ventilate the room.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. Chips, rust and pitting are repaired.
  4. The surface is keyed and primed for the new finish.
  5. The new finish is sprayed on in several coats and left to cure until the next day.

Preparing for the visit

  • Clear toiletries, mats and anything else from around the area
  • Keep a parking space free if you can
  • Tell us about any previous repairs or coatings

How to get a price

Email us photos of the damage and a wider shot of the entire item, and tell us you’re in Ellastone, and we’ll reply with a fixed quote.

Send photos for a quote

Related advice

Can I fix it myself?

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.

Common questions in Ellastone

What areas do you cover?

We cover the entire UK, including Ellastone and the rest of Derbyshire. Send your postcode with your pictures and we will offer you dates.

Will there be fumes?

There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.

Can you change the colour of my bath?

Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.

Do you need to take the bath out?

No, it stays where it is. We work on the bath in place, with the room masked and ventilated.

Do you work in Ellastone?

Yes, we do. Technicians travel to Ellastone from across the region, and the price is the same as everywhere else.

Can you price it without visiting?

Nearly always. If photos do not show enough, we’ll ask for another angle.

Is there a guarantee?

Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.

Will the price change on the day?

Your quote covers the damage in the pictures. If there is more, we’ll tell you before starting.

When we would advise against a repair

It helps to know what we cannot do too:

  • Problems we can’t see until an old finish comes off
  • A bath split right through the body
  • Steel that has corroded right through

Not sure? Send photos and we will give you a straight answer before booking.

Materials we repair

  • Pressed steel baths
  • Victorian roll-tops
  • Cast iron baths
  • Basins & shower trays
  • Acrylic baths
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.