East Riding of Yorkshire · England
Bath re-enamelling & resurfacing in Etton, East Riding of Yorkshire
Damaged bath in Etton? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Worn patches where water runs and sits
Bath re-enamelling at your home in Etton
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Our repair technicians work on pressed steel baths, cast iron baths and acrylic baths, and the jobs we see most are an outdated colour you’d like to change and worn patches where water runs and sits.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking.
- Area
- Etton (HU17)
- County
- East Riding of Yorkshire
- Cover
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Landlord and trade work in Etton
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
If you manage property in Etton, we can repair and quote for several addresses together. Send photos for each one and we’ll price them together.
Do you need bath re-enamelling in Etton?
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
The most common problems we’re called about are:
- An outdated colour you’d like to change
- Several chips and rust patches
- An original cast iron bath that needs restoring
- Brown or grey marks that do not clean off
Before booking anyone
- Who turns up on the day
- Whether there are any call-out or travel charges
- How your room will be protected
- What happens if they find more damage
Keeping it looking good
A little care keeps the finish looking good. Our advice:
- Stick to gentle, non-abrasive cleaners
- Avoid suction-cup mats
- Don’t let dyes or oils sit on the finish
- Don’t leave a chip unrepaired
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
Repair or replace: which is better?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Why us?
- Work done at your home or business
- Dust sheets down, tidy finish
- CHAS and Constructionline accredited
- One price list for the whole UK
See our prices page or bath cost comparison.
How the visit works
We work cleanly and quietly. Protection goes down first, then the work takes the best part of a day. At the end we talk you through the curing time and the aftercare.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Plan for the room to be out of bounds to pets and children
- Ensure the room can be ventilated
- Tell us about parking, stairs or access
Get a quote
Most customers in Etton get their price from pictures. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Read more
Repairs by material
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
More services for Etton
What affects the price in Etton
Resurfacing from £350. We give every job a fixed quote from photos. These are the things that affect it:
- Access to the area
- How many items we do on one visit
- How many areas need work
- The type of damage
The price reflects the work involved, not your postcode. The full price is agreed before booking, with no extras added later.
Getting a price from pictures
Phone pictures are fine, there’s no need for anything special. Make sure they show:
- Any earlier repairs or coatings
- Natural light rather than flash
- Where you are, by postcode
- Any details about the material
Upload photos of the damage and a wider shot of the whole item, with your HU17 postcode, and we’ll come back with a fixed quote.
Etton and nearby
Etton is about 4 miles north-west of Beverley, in East Riding of Yorkshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. We work in 299 places across East Riding of Yorkshire. You can also see our page for Leeds, about 42 miles away.
We cover every part of the HU17 postcode area and the streets around it. You will find streets such as Main Street, Appleton Fold and Chantry Lane, all of which we cover. If you’re just outside Etton, we cover Cherry Burton (1 mile south-east), South Dalton (1 mile north-west), Gardham (1 mile south-west), Holme on the Wolds (2 miles north) and Thorpe (2 miles north-east). Within a short drive, we also cover Beverley (4 miles south-east), Driffield (9 miles north), Pocklington (11 miles west), Hessle (11 miles south), Cottingham (8 miles south-east) and Hornsea (14 miles east).
Local landmarks in Etton
Locally, our jobs take us to homes close to Church of St Mary and The Pub at Etton. For rail, the closest station is Arram station, roughly 3.6 miles east of the centre. Other landmarks nearby include Broadgate Hospital (4.2 miles south-east).
Common questions in Etton
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
What if the damage is worse than the photos show?
Your quote covers the damage in the photos. If there is more, we’ll tell you before starting.
Is there any odour?
There may be a mild smell during the work.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Can I add another job to the visit?
Of course, and it typically saves money. Send pictures of everything together and you will get one combined price.
Can a failed resurfacing be redone?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
How do I book?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
About our accreditations · Every repair comes with a one-year guarantee.
