East Riding of Yorkshire · England
Bath Re-enamelling in Gardham
We travel to Gardham for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- A roll-top that’s seen better days
- An outdated colour you’d like to change
How we handle bath re-enamelling in Gardham
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. If you’re dealing with a roll-top that’s seen better days and lots of chips and rust spots, we can normally put it right, on cast iron baths, acrylic baths and pressed steel baths alike.
You’re covered for a year from the day of the repair. Just call us if there is a problem and we will come back.
- Area
- Gardham (HU17)
- Area hub
- East Riding of Yorkshire
- Warranty
- One year on every repair
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Gardham and nearby
Gardham is about 5 miles west of Beverley, in East Riding of Yorkshire. Customers in Gardham get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. Gardham is one of 299 places in East Riding of Yorkshire where we work. You can also see our page for Leeds, about 41 miles away.
We work across HU17. We also cover the places around Gardham: Etton (1 mile north-east), South Dalton (2 miles north), Cherry Burton (2 miles east), Holme on the Wolds (3 miles north) and Bishop Burton (3 miles south-east). We also work in nearby towns such as Beverley (5 miles east), Driffield (11 miles north-east), Pocklington (10 miles north-west), Hessle (11 miles south-east), Cottingham (8 miles south-east) and Market Weighton (5 miles west).
Local landmarks in Gardham
Further afield, we also cover the area around Broadgate Hospital (4.7 miles south-east).
Places near Gardham
More services for Gardham
What we do, step by step
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take most of the day. We tidy up before we leave and tell you when it’s ready to use.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Avoid using the area for a few hours before we arrive
- Mention if the room is upstairs or in a flat
- Plan for the room to be out of bounds to pets and children
Ask for a price
There is no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Related advice
How to care for the repair
How the surface is treated afterwards matters. Here’s what we suggest:
- A quick wipe after use keeps limescale away
- Do not leave a chip unrepaired
- Repair dripping taps early
- Never use suction bath mats
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
DIY repairs versus a professional job
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
What bath re-enamelling costs
Resurfacing from £350. Prices are worked out job by job. What matters most is:
- Access to the area
- The colour and finish to match
- How many items we do on one visit
- Whether old repairs or coatings need taking off
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
How to get a fixed price
Good pictures mean an accurate price. Here’s what we find most useful:
- Daylight if possible, and no flash reflection
- A close-up of the damage, in focus
- A coin beside the damage so we can judge size
- Any details about the material
If you are in Gardham and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
When we’d advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- A metal bath with a through crack
- Leaking taps or wastes (a plumber’s job)
- Problems we cannot see until an old finish comes off
Not sure? Send photos and we’ll give you a straight answer before booking.
Materials we work on in Gardham
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
Should you replace it?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing normally wins. Resurfacing from £350, with every job priced individually. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why us?
- Most jobs done in one visit
- One-year guarantee on every repair
- No need to remove anything
- We leave the room as we found it
See our full price list and bath cost comparison.
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
What we are called out for in Gardham
Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Send us a picture if you notice any of these:
- A peeling or bubbling previous coating
- A period or roll-top bath worth keeping
- An outdated colour you’d like to change
- A dull, rough surface that won’t come clean
Before you book anyone
- Whether the colour is mixed to match
- What aftercare is recommended
- The length of the guarantee and what it covers
- What prep work is covered
Common questions in Gardham
Can you resurface a pink bath in white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
What if the damage is worse than the pictures show?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
What information do you need?
Use the quote form or ring 0345 017 0787, and we’ll take it from there.
Will the bath be moved?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
How soon can you come?
It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
About our accreditations · Every repair comes with a one-year guarantee.
