East Riding of Yorkshire · England
Bath Re-enamelling in Holme on the Wolds
Local bath re-enamelling for Holme on the Wolds: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Worn patches where water runs and sits
- Lots of chips and rust spots
When we’d advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- A bath split right through the body
- Holes rusted through the metal
- Acrylic that moves when you stand in it
If in doubt, send photos and we will say what we think.
Materials we repair
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
How we handle bath re-enamelling in Holme on the Wolds
We re-enamel a lot of period and roll-top baths, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. Typical jobs include an old resurfacing that’s failing and chips and rust in more than one place, in basins & shower trays, acrylic baths and Victorian roll-tops.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Where
- Holme on the Wolds (HU17)
- Region
- East Riding of Yorkshire
- Warranty
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
For landlords and businesses
For developers and builders, we fix damage before handover. We can visit several plots in one trip to keep costs down.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
When to call us in Holme on the Wolds
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
People usually call us when they notice something like this:
- A dull, rough surface that won’t come clean
- Brown or grey marks that don’t clean off
- A roll-top that’s seen better days
- Chips and rust in more than one place
Questions to ask before you book
- What happens if they find more damage
- How your room will be protected
- What preparation is included
- Whether the price is fixed and includes VAT
Our work in Holme on the Wolds
Holme on the Wolds is about 6 miles north-west of Beverley, in East Riding of Yorkshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Holme on the Wolds is one of 299 towns and villages in East Riding of Yorkshire where we work. Our nearest city page is Leeds, about 42 miles away.
Postcode districts we cover here: HU17. Other places close to Holme on the Wolds include Lund (1 mile north), Middleton-on-the-Wolds (2 miles north-west), Bainton (4 miles north), North Dalton (4 miles north-west) and Kirkburn (5 miles north). Further out, we also cover Beverley (6 miles south-east), Driffield (8 miles north-east), Pocklington (10 miles west), Hessle (13 miles south), Cottingham (10 miles south-east) and Hornsea (15 miles east).
Near you in Holme on the Wolds
Our clients here include homes close to Church of St Peter. The nearest railway station is Arram station, roughly 4.3 miles east. A little further out are Southburn Archaeological Museum (3.7 miles north-east) and East Riding Community Hospital (5.9 miles south-east).
Questions from Holme on the Wolds
How long does re-enamelling last?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
What happens after I send pictures?
We come back with a fixed price, generally with dates to choose from. There is no obligation to book.
Will there be fumes?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
How long is the bath unusable?
Normally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Is there a guarantee?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Can you repair something that is been repaired before?
Typically, yes. The old repair comes out first, so let us know about it.
Do you cover the whole of East Riding of Yorkshire?
We cover the whole UK, including Holme on the Wolds and the rest of East Riding of Yorkshire. Just include your postcode and we’ll offer you dates.
Looking after it afterwards
It’s all simple stuff:
- Don’t use the bath until it has fully cured
- Stick to gentle, non-abrasive cleaners
- Have chips seen to early
- Keep suction mats out of the bath
Use mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
Prices and what affects them
Resurfacing from £350. Prices are worked out job by job. The main factors are:
- How easy the damage is to reach
- What kind of damage it is
- Whether we combine several jobs
- Previous DIY repairs that have to come out
A repair is priced on what needs doing, not where you live. The full price is agreed before booking, with no extras added later.
Getting a price from pictures
Most quotes are done from pictures alone. To make it quick:
- A clear, close picture of the problem area
- Whether it’s been repaired or coated before
- Good light, ideally daylight, without flash glare
- What it’s made of, if you know
You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
How it works
The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the job itself takes a full day. At the end we talk you through how soon it can be used and how to care for it.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the following day.
Preparing for the visit
- Make sure the area is dry
- Mention any earlier repairs or resurfacing
- Let us know about parking or access
How to get a price
To get a price, send two or three pictures using our quote form or ring us. We’ll say right away if a repair is the right fix.
Advice
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
Also near Holme on the Wolds
More services for Holme on the Wolds
About our accreditations · Every repair comes with a one-year guarantee.
