Kent · England
Bath Re-enamelling in Ewell Minnis
Local bath re-enamelling for Ewell Minnis: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A peeling or bubbling previous coating
- A bath that stays dull however much you clean it
Work for landlords and builders
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.
Bath re-enamelling at your home in Ewell Minnis
When a bath is structurally fine but worn out on the surface, re-enamelling is typically the most cost-effective option. There is no removal, plumbing or tiling involved. We work on acrylic baths, basins & shower trays and cast iron baths, and people most frequently call us about a coating lifting around the plughole and thin, worn enamel in places.
A one-year guarantee comes as standard, so you are covered after the visit.
- Location
- Ewell Minnis (CT15)
- Area hub
- Kent
- Guarantee
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Why repair rather than replace?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
What you get with us
- Work done at your home or business
- No extra charge for your area
- Colours mixed by hand to suit your surface
- Generally one visit, start to finish
See our prices page and resurfacing vs replacement cost guide.
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
If you do try a kit, read the instructions carefully, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Where we work around Ewell Minnis
Ewell Minnis is about 3 miles west of Dover, in Kent. Whether you’re in the middle of Ewell Minnis or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. We work in all 922 towns and villages across Kent, from the larger towns to small villages. Our jobs stretch from Ewell Minnis to London (62 miles away).
Jobs in CT15 work the same way as everywhere else we cover. Local streets include Belsey Lane and Green Lane, and we cover them all. Nearby, we also work in Chalksole Green (1 mile west), Wolverton (1 mile south-east), Alkham (1 mile south), South Alkham (1 mile south-west) and Lydden (1 mile north-east). We also work in nearby towns such as Canterbury (11 miles north-west), Dover (3 miles east), Folkestone (5 miles south-west), Deal (9 miles north-east), Hythe (8 miles south-west) and Tower Hamlets (3 miles east).
Near you in Ewell Minnis
In Ewell Minnis, that means homes near Sladden Wood and Church of St Anthony the Martyr. Ewell Minnis’s nearest station is Kearsney station, roughly 1.9 miles east of the centre. Well-known places in the area include Buckland Hospital (3 miles east) and Crabble Corn Mill (2.4 miles east). For a walk, there’s Sugar Loaf Hill and Dover Western Heights.
What we do, step by step
There is not much you need to do on the day. Show us the job, point us to the room, and we will get on with it. The job generally runs to the best part of a day.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Let us know which floor the room is on
- Make sure the area is dry
- Mention any parking restrictions or tricky access
How to get a price
To get a price, send two or three pictures through our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
Related advice
How we price bath re-enamelling
Resurfacing from £350. There’s no area surcharge for Ewell Minnis. The price reflects:
- Any earlier repairs that need removing first
- The size and number of damaged areas
- The material
- Whether we combine several jobs
We don’t add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed price
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- A coin or ruler next to the damage for scale
- One picture of the whole bath
- Natural light rather than flash
- The material, if you know it
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Ewell Minnis questions
What areas do you cover?
Everywhere in the UK, Ewell Minnis included. There is no extra charge for travel.
Can tenants book a repair?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Do you charge for travel?
There’s no separate call-out charge. The fixed quote covers the visit and the work.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
How long does re-enamelling take?
Generally one day, with the bath ready the day after. A badly pitted bath can need a second day.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Can you repair something that is been repaired before?
Most of the time. Let us know what was used before.
What does bath re-enamelling cost?
Resurfacing from £350. We give a fixed price based on photos of the damage. Send a close-up and a photo of the entire item and your postcode.
When we would advise against a repair
A repair isn’t always the answer, and we would rather say so up front. Repairs won’t solve:
- Anything hidden under an old coating, until we remove it
- A bath split right through the body
- Leaking taps or wastes (a plumber’s job)
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
Also near Ewell Minnis
What else we do in Ewell Minnis
Aftercare tips
Looking after the surface is easy:
- Never use suction bath mats
- Don’t use the bath until it has fully cured
- Keep toiletries on a shelf rather than in the bath
- Wipe the bath dry after use in hard water areas
Use mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
About our accreditations · Every repair comes with a one-year guarantee.
