Kent · England
Bath re-enamelling & resurfacing in Wolverton, Kent
We travel to Wolverton for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- A coating lifting around the plughole
- A coloured bath you want in white
About our bath re-enamelling in Wolverton
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. We regularly repair acrylic baths, cast iron baths and pressed steel baths, and the jobs we see most are a coloured bath you want in white and a bath that stays dull however much you clean it.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Wolverton (CT15)
- Region
- Kent
- Warranty
- A year, on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
When we’d advise against a repair
We will not take on work that won’t last, so these are the limits:
- Holes rusted through the metal
- Leaking taps or wastes (a plumber’s job)
- Problems we cannot see until an old finish comes off
Send us pictures and we’ll tell you honestly.
Materials we repair
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Basins & shower trays
Signs you need bath re-enamelling in Wolverton
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Common reasons people in Wolverton contact us include:
- Chips and rust in more than one place
- A bath that stays dull however much you clean it
- An original cast iron bath that needs restoring
- An outdated colour you’d like to change
What your quote should include
- What prep work is covered
- Whether there are any call-out or travel charges
- Whether they match the colour on site
- Is the price fixed, and does it include VAT?
Places near Wolverton
Other services in Wolverton
Work for landlords and builders
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Housing associations and facilities teams use us for planned and reactive repairs in Kent and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Wolverton questions
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
Is a repair better than a new one?
Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
How long does re-enamelling take?
One day for most baths and can be used the day after. We will confirm timings when we quote.
How much does bath re-enamelling cost in Wolverton?
Prices start from £350. Every job gets a fixed quote based on photos of the damage. Send a close-up and a picture of the whole item and your postcode.
Which areas do you work in?
Everywhere in the UK, Wolverton included. There is no extra charge for travel.
Do you cover Wolverton?
Yes, we do. We send a technician to Wolverton for every job, and the price is the same as everywhere else.
Is my repair covered?
All our work carries our one-year guarantee. We will explain what it covers when we quote.
Can tenants book a repair?
Yes. Ask your landlord first, and we can send them the quote if that helps.
What bath re-enamelling costs
Prices start from £350. Each job gets its own fixed price. This is what makes a difference:
- The size and number of damaged areas
- Where the damage is and how we get to it
- How hard the colour is to match
- Doing more than one item at once
What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed price from your photos, so you know the cost before booking.
How to get a fixed price
Photographing the damage takes a minute, and it saves a visit. Please include:
- What it’s made of, if you know
- The postcode, so we can plan the visit
- One picture of the entire bath
- Details of any past repairs
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Repair or replace in Wolverton?
A replacement frequently means several trades over several days. Resurfacing takes one technician and generally a day, and the bath is usable the day after. Prices start from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Why book with us
- Most jobs done in one visit
- Free fixed quotes from pictures
- We’ll tell you if it’s not worth repairing
- Everything repaired in place
Read our full price list or bath cost comparison.
The process
We agree an arrival time beforehand. Once we’re there, the work takes a full day for most jobs. We leave the room clean and you will know when it can be used.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can generally be used the day after.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Keep a parking space free if you can
- Mention any earlier repairs or resurfacing
Get a quote
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.
Read more
Should I try a DIY kit first?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
Wolverton and the surrounding area
Wolverton is about 3 miles west of Dover, in Kent. We agree a date that works for you, and we’ll give you an arrival time in advance, so you’re not left waiting in all day. We work in all 922 towns and villages in Kent. Our nearest city page is London, about 63 miles away.
All of CT15 is covered. Local streets include Alkham Valley Road and Wolverton Hill, and we cover them all. We also travel to Ewell Minnis (1 mile north-west), Alkham (1 mile south-west), Chalksole Green (1 mile west), South Alkham (1 mile south-west) and Kearsney (1 mile east). Further out, we also cover Canterbury (12 miles north-west), Dover (3 miles east), Folkestone (5 miles south-west), Deal (8 miles north-east), Hythe (8 miles south-west) and Tower Hamlets (3 miles east).
Around Wolverton
Locally, our jobs take us to homes close to Sladden Wood, Church of St Anthony the Martyr and Astor College for the Arts, among other places. Wolverton’s nearest station is Kearsney station, about 1.5 miles north-east. Well-known places in the area include Dover Castle (3.8 miles east) and Crabble Corn Mill (1.9 miles east). The countryside around Wolverton includes Sugar Loaf Hill and Dover Western Heights.
How to look after the repair
So the finish stays in good condition:
- Respect the curing time we give you
- Wash away dyes and oils after use
- A quick wipe after use keeps limescale away
- Clean with a soft cloth and mild detergent
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
About our accreditations · Every repair comes with a one-year guarantee.
