Flintshire · England
Bath re-enamelling & resurfacing in Nant-bâch, Flintshire
Problem with your bath in Nant-bâch? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- A coating lifting around the plughole
- An outdated colour you’d like to change
Bath re-enamelling in Nant-bâch without replacing anything
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. Common call-outs are for an outdated colour you’d like to change and several chips and rust patches, in acrylic baths, cast iron baths and pressed steel baths.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Nant-bâch (CH6)
- Area hub
- Flintshire
- Warranty
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Signs you need bath re-enamelling in Nant-bâch
Older baths often have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
You may need us if you’ve spotted:
- An original cast iron bath that needs restoring
- A coating lifting around the plughole
- Staining under the taps and around the waste
- Several chips and rust patches
Before booking anyone
- What protection goes down before work starts
- What aftercare is recommended
- Is the price fixed, and does it include VAT?
- What prep work is covered
Also in Nant-bâch
Repair or replace: which is better?
If the bath is sound, re-enamelling is normally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Our bath re-enamelling starts from £350. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why us?
- Free fixed quotes from pictures
- We come to you, anywhere in the UK
- Every repair guaranteed for a year
- One visit for most repairs
See our full price list or bath cost comparison.
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
We carry out planned and one-off repairs for housing associations and facilities teams in Flintshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
What happens on the day
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which generally takes a full day. If we find something your photos didn’t show, we’ll explain it before carrying on.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the day after.
Preparing for the visit
- Keep a parking space free if you can
- Keep pets and children out of the room while we work
- Tell us about any previous repairs or coatings
How to get a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. You’ll get a fixed quote, not an estimate.
Read more
DIY repairs versus a professional job
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
What affects the price in Nant-bâch
Resurfacing from £350. We do not charge extra for travel to Nant-bâch. The price comes down to:
- The colour and finish to match
- Doing more than one item at once
- Access to the area
- The type of damage
What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed quote from your pictures, so you know the cost before booking.
Send photos for a quote
Two or three clear photos are generally enough. It helps if you send:
- Where you are, by postcode
- One sharp close-up of the damage
- What it’s made of, if you know
- A wider photo showing the entire bath
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job without visiting.
How to look after the repair
How the surface is treated afterwards matters. Here’s what we suggest:
- Stick to gentle, non-abrasive cleaners
- Do not let dyes or oils sit on the finish
- Do not use the bath until it has fully cured
- Keep toiletries on a shelf rather than in the bath
Dry the bath after use if possible, especially in hard water areas, and rinse away any product left on the surface.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
When a repair is not the answer
Some jobs are not right for a repair, including:
- Problems we can’t see until an old finish comes off
- Plumbing leaks, which need a plumber
- Acrylic that moves when you stand in it
If in doubt, send pictures and we’ll say what we think before you book.
Materials we work on in Nant-bâch
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
Our work in Nant-bâch
Nant-bâch is about 2 miles west of Flint, in Flintshire. From the centre of Nant-bâch to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. We cover all 139 towns and villages in Flintshire, from the larger towns to small villages. You can also see our page for Liverpool, about 15 miles away.
Every address in CH6 is covered. We also cover the places around Nant-bâch: Halkyn (1 mile south), Gadlys (1 mile north), Bagillt (1 mile north-east), Flint (2 miles east) and Berth-ddu (2 miles south). Larger places within reach include Connah's Quay (5 miles south-east), Buckley (6 miles south-east), Bwcle (7 miles south-east), Saltney (12 miles south-east), Mold (6 miles south) and Holywell (3 miles north-west).
What’s near Nant-bâch
Our clients here include homes close to Springfield Hotel, Cornist Park C.P. School and Church of St Mary the Virgin, among other places. For rail, the closest station is Flint station, roughly 1.9 miles east of the centre. Well-known places in the area include Hen Blas Castle (0.6 miles north-east) and St Winefride's Well Museum (2.8 miles north-west). Not far away are Cefn and Deeside Nature Reserve.
Nant-bâch: your questions answered
Can you re-enamel a roll-top bath?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
What happens next?
You get a fixed price and available dates. If we need another angle, we’ll ask.
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
How do I get a price for bath re-enamelling in Nant-bâch?
Resurfacing from £350. Because every job differs, we price from pictures. You will get a fixed figure before booking.
Can you quote from pictures?
In nearly every case. We only ask to see it in person if the photos cannot show what we need.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Will the new finish last?
Care for it and it lasts. Gentle cleaning, no suction mats.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit usually costs less than separate visits. Send photos of everything you’d like done.
About our accreditations · Every repair comes with a one-year guarantee.
