Aberdeenshire · Scotland
Bath Re-enamelling in Sandhaven
Bath re-enamelling for Sandhaven, without a refit. Get a fixed price from your pictures, then we come to you.
- Resurfacing from £350
- An outdated colour you’d like to change
- A period or roll-top bath worth keeping
Bath re-enamelling in Sandhaven, done in place
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. Typical jobs include a coloured bath you want in white and an original cast iron bath that needs restoring, across cast iron baths, basins & shower trays and acrylic baths.
All our work is covered by our one-year guarantee.
- Where
- Sandhaven (AB43)
- Region
- Aberdeenshire
- Guarantee
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Repairs by material
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Also near Sandhaven
What else we do in Sandhaven
What happens on the day
We turn up when we said we would, introduces themselves and checks the damage against your photos first. The floor and nearby surfaces are covered before we open a single tin. The work itself takes the best part of a day, and we leave the room as we found it.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s typically ready the next day.
How to prepare
- Point us to the nearest place to park
- Mention any earlier repairs or resurfacing
- Mention any parking restrictions or tricky access
Ask for a price
Send us pictures of the damage and a wider shot of the whole item, and tell us you are in Sandhaven, and we’ll reply with a fixed quote.
Related advice
What a repair cannot fix
It helps to know what we can’t do too:
- Leaking taps or wastes (a plumber’s job)
- A bath that is rusted through
- A poorly supported acrylic bath, until it’s firmed up
Send us photos and we will tell you honestly before booking.
Surfaces we repair
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
Keeping it looking good
A little care keeps the finish looking good. Our advice:
- Leave the bath for the full curing time before using it
- A quick wipe after use keeps limescale away
- Get any chip repaired quickly
- Keep toiletries on a shelf rather than in the bath
Dry the bath after use if possible, especially in hard water areas, and rinse off any bath products.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
FAQs for Sandhaven
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Do you resurface freestanding baths?
Yes. Inside and out if you’d like.
It’s been repaired before. Can you still fix it?
In most cases. We remove the old repair before doing a new one.
Is there a smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Can you resurface a pink bath in white?
Yes, white is the usual choice. Mention the colour you want when you send pictures.
What happens next?
You will get a fixed quote back, generally with dates to choose from. You’re under no obligation.
How much does bath re-enamelling cost in Sandhaven?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Can landlords book you?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Aberdeenshire.
Signs you need bath re-enamelling in Sandhaven
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Resurfacing sorts them out together.
The things clients normally mention when they call are:
- Thin, worn enamel in places
- Lots of chips and rust spots
- A bath that stays dull however much you clean it
- A bath in a colour that no longer suits
What to look for in a quote
- What preparation is included
- Aftercare advice
- Whether the price is fixed and includes VAT
- When it can be used again
About Sandhaven
Sandhaven is about 2 miles north-west of Fraserburgh, in Aberdeenshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in 161 places across Aberdeenshire, from the larger towns to small villages.
Our visits in AB43 are booked in the same way as anywhere else. Whether you live on Main Street, Forbes Road and Duthie's Lane or anywhere nearby, we can come to you. Nearby, we also work in Pittulie (1 mile north-west), Broadsea (2 miles east), Fraserburgh (2 miles south-east), Rosehearty (2 miles west) and Memsie (3 miles south). We also work in nearby towns such as Mintlaw (12 miles south), Longside (13 miles south), Strichen (8 miles south), Gardenstown (10 miles west), St Fergus (13 miles south-east) and Maud (12 miles south).
Local landmarks in Sandhaven
In Sandhaven, that means homes near Fraserburgh Academy. A little further out are Fraserburgh Heritage Centre (2 miles east) and Pittulie Castle (1.2 miles west).
What affects the price in Sandhaven
Resurfacing from £350. Each job gets its own fixed quote. This is what makes a difference:
- Previous DIY repairs that have to come out
- How much damage there is
- How many items we do on one visit
- Whether it’s a chip, crack, burn or wear
The price reflects the work involved, not your postcode. You will see the full price before booking, with nothing added on the day.
How to get a fixed quote
Almost every job we do is priced from pictures. This is what we need:
- Any details about the material
- Something in shot to show the size
- Natural light rather than flash
- Details of any past repairs
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Should you replace it?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why us?
- One visit for most repairs
- Colour-matched on site
- Fixed prices from your photos
- No extra charge for your area
See our prices page or bath cost comparison.
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
About our accreditations · Every repair comes with a one-year guarantee.
