Wiltshire · England
Bath re-enamelling & resurfacing in Frenchmoor, Wiltshire
Our repair technicians come to Frenchmoor for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- An original cast iron bath that needs restoring
Bath re-enamelling at your home in Frenchmoor
When a bath is structurally fine but worn out on the surface, re-enamelling is usually the most cost-effective option. It avoids removal, plumbing and re-tiling. We work on cast iron baths, acrylic baths and Victorian roll-tops, and common reasons people contact us are worn patches where water runs and sits and brown or grey marks that don’t clean off.
Every repair is covered by a one-year guarantee, wherever you are in Wiltshire.
- Area
- Frenchmoor (SP5)
- Area hub
- Wiltshire
- Guarantee
- 12 months on all our work
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Signs you need bath re-enamelling in Frenchmoor
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
People normally call us when they notice one of these:
- A bath that stays dull however much you clean it
- A roll-top that’s seen better days
- Stains that will not shift
- A peeling or bubbling previous coating
Before booking anyone
- How to look after the finish
- Who will actually do the work
- Whether cleaning and preparation are in the price
- How soon you can use it again
What bath re-enamelling costs
Resurfacing from £350. We price every job individually. What matters most is:
- How many areas need work
- How hard the colour is to match
- Whether we combine several jobs
- The material and finish
A repair generally costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
Send pictures for a quote
Most quotes are done from pictures alone. To make it quick:
- A wider photo showing the entire bath
- Any details about the material
- Any earlier repairs or coatings
- A clear, close picture of the problem area
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Keeping it looking good
Simple care helps the repair last. Our advice:
- Avoid suction-cup mats
- Keep toiletries on a shelf rather than in the bath
- Have chips seen to early
- Clean with a soft cloth and mild detergent
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Repair dripping taps promptly.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Our work in Frenchmoor
Frenchmoor is about 7 miles north-west of Romsey, in Wiltshire. Whether you’re in the middle of Frenchmoor or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. We work in 425 places across Wiltshire. You can also see our page for London, about 73 miles away.
Our technicians cover all of SP5. Neighbouring places we cover include East Dean (1 mile south), West Tytherley (1 mile north), West Dean (1 mile south-west), Buckholt (2 miles north) and East Grimstead (3 miles west). Larger places within reach include Salisbury (8 miles west), Amesbury (10 miles north-west), Bugmore (8 miles west), Milford (7 miles west), Old Sarum (8 miles north-west) and Harnham (8 miles west).
Near you in Frenchmoor
We visit homes around Borbach Chantry, The Old Brewers pub and West Tytherley Church of England Primary School and the streets around them. The closest station to Frenchmoor is Dean station, about 1 mile south-west of the centre.
The process
We turn up at the time we agreed with you, introduces themselves and checks the damage against your pictures first. The floor and nearby surfaces are covered before we open a single tin. The work itself takes the best part of a day, and the room is left clean and tidy.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Make sure the area is dry
- Mention any earlier repairs or resurfacing
- Have a window or extractor fan available
Getting a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. You’ll get a fixed price, not an estimate.
Read more
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Towns and villages near Frenchmoor
Other services in Frenchmoor
Repairing versus replacing in Frenchmoor
Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Re-enamelling gives the bath a new finish without moving it. Prices start from £350. Our prices are the same across the UK, so there’s no premium for Frenchmoor. The job itself decides the price: the material, the amount of damage and how many items.
Why choose Surface Doctor in Frenchmoor
- Technicians who travel to you, UK-wide
- No extra charge for your area
- Every repair guaranteed for a year
- A fixed quote before you book
Read our prices page and bath cost comparison.
Landlord and trade work in Frenchmoor
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
We work for landlords, letting agents and housing providers in Frenchmoor as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.
Questions from Frenchmoor
Can I get a quote without a visit?
In nearly every case. If pictures don’t show enough, we’ll ask for another angle.
Will there be fumes?
A little, during the work. We set up ventilation and the smell fades as it cures.
Will the new finish last?
Care for it and it lasts. Avoid abrasive cleaners and suction mats.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Can you repair several things at once?
Yes, and it’s frequently cheaper. Send pictures of everything together and you’ll get one combined price.
Do you work for landlords and businesses?
Yes, frequently. We can quote for several properties together and work between tenancies.
How long does re-enamelling take?
Most baths are done in a day and can be used the day after. We’ll confirm timings when we quote.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
About our accreditations · Every repair comes with a one-year guarantee.
