Flintshire · England
Bath Re-enamelling for Gadlys homes
Bath re-enamelling for Gadlys, without a refit. Send us photos for a fixed price, then we come to you.
- Resurfacing from £350
- Stains that won’t shift
- An old resurfacing that’s failing
Bath re-enamelling at your home in Gadlys
Most baths are re-enamelled in a day. Taps, tiles, panels and plumbing all stay in place. We are frequently asked to fix worn patches where water runs and sits and lots of chips and rust spots, on Victorian roll-tops, pressed steel baths and cast iron baths.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Area
- Gadlys (CH6)
- County
- Flintshire
- Warranty
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
How we price bath re-enamelling
Resurfacing from £350. Prices are worked out job by job. What matters most is:
- Whether old repairs or coatings need taking off
- What kind of damage it is
- What the surface is made of
- Unusual colours or finishes
We don’t add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from pictures
A couple of clear pictures is all it takes. It helps if you send:
- One sharp close-up of the damage
- One picture of the entire bath
- Whether it’s been repaired or coated before
- Daylight if possible, and no flash reflection
Most clients in Gadlys get their price from photos. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Repair or replace in Gadlys?
Replacing a cast iron bath is a big job: they’re heavy, frequently need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed quote from your photos, so you know the cost before booking.
Why Gadlys clients choose us
- Same prices wherever you are
- Usually one visit, start to finish
- We leave the room as we found it
- Repair technicians who travel to you, UK-wide
Read our full price list or bath cost comparison.
Work for landlords and builders
Builders use us to fix snagging damage before handover. Several plots can be done in one visit.
Landlords, letting agents and housing providers in Gadlys use us as well as homeowners. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
Covering Gadlys
Gadlys is about 2 miles south-east of Holywell, in Flintshire. Anywhere in CH6, we come to you. Gadlys is one of 139 places in Flintshire we cover. Our nearest city page is Liverpool, about 15 miles away.
Postcode districts we cover here: CH6. Neighbouring places we cover include Bagillt (1 mile east), Nant-bâch (1 mile south), Whelston (1 mile north), Walwen (1 mile north) and Halkyn (2 miles south). Within a short drive, we also cover Connah's Quay (6 miles south-east), Buckley (7 miles south-east), Bwcle (8 miles south-east), Saltney (12 miles south-east), Mold (7 miles south) and Lache (12 miles south-east).
Near you in Gadlys
In Gadlys, that means homes near Upper Ship Inn, Ysgol Treffynnon and Catholic Church Of Our Lady Of Lourdes, among other places. Gadlys’s nearest station is Flint station, roughly 2.2 miles south-east of the centre. Nearby you will also find Lluesty Hospital (1.5 miles west) and Hen Blas Castle (0.9 miles south-east). The countryside around Gadlys includes Deeside Nature Reserve and Cefn.
Other services in Gadlys
Looking after it afterwards
It’s all simple stuff, just a few sensible habits:
- Stick to gentle, non-abrasive cleaners
- Don’t leave a chip unrepaired
- Do not use the bath until it has fully cured
- A dripping tap should be fixed promptly
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Signs you need bath re-enamelling in Gadlys
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
The most common problems we are called about are:
- Wear marks under the taps
- An outdated colour you’d like to change
- A period or roll-top bath worth keeping
- An old resurfacing that is failing
Comparing quotes
- What the guarantee covers, and for how long
- What prep work is covered
- Aftercare advice
- How the room is protected while they work
When we’d advise against a repair
Not everything can be repaired, and we’d rather say so up front. We can’t fix:
- Leaks from fittings rather than the bath
- A poorly supported acrylic bath, until it’s firmed up
- Damage hidden under a previous coating, until it’s stripped back
Not sure? Send photos and we will give you a straight answer before booking.
Materials we repair
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
How the visit works
The work is clean and fairly quiet. Protection goes down first, then the work takes a full day. Before we leave, we explain how soon it can be used and how to care for it.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Clear the area around the damage
- Let us know if it has been repaired before
- Have a window or extractor fan available
Get a quote
The quickest way to a price is to send two or three pictures through our quote form or call us. We will say right away if a repair is the right fix.
Advice
Gadlys questions
When can you do it?
We will give you dates with your quote. Tell us if you need it done quickly.
Can a failed resurfacing be redone?
Normally, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
How do I book?
Just pictures, your postcode and a contact number. On the day, access to the room.
Will the new finish last?
Care for it and it lasts. Gentle cleaning, no suction mats.
Can you make a coloured bath white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Is repairing better than replacing?
Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
About our accreditations · Every repair comes with a one-year guarantee.
