Lancashire · England
Bath re-enamelling & resurfacing in Glasson, Lancashire
Full bath re-enamelling and resurfacing in Glasson, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Wear marks under the taps
What bath re-enamelling costs
Prices start from £350. Prices are worked out job by job. The main factors are:
- Whether old repairs or coatings need taking off
- How many items we do on one visit
- Unusual colours or finishes
- The size and number of damaged areas
The price reflects the work involved, not where you live. The full price is agreed before booking.
How to get a fixed quote
You can take the photos on your phone, there’s no need for anything special. Ensure they show:
- Good light, ideally daylight, without flash glare
- One picture of the whole bath
- A clear, close picture of the problem area
- Where you are, by postcode
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.
Bath re-enamelling at your home in Glasson
When a bath is structurally fine but worn out on the surface, re-enamelling is generally the most cost-effective option. It avoids removal, plumbing and re-tiling. If you are dealing with brown or grey marks that don’t clean off and a coating lifting around the plughole, we can help.
Big or small, you get the same one-year guarantee in Glasson and across Lancashire.
- Where
- Glasson (LA2)
- Area hub
- Lancashire
- Guarantee
- A year, on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What happens on the day
We turn up when we said we would and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. Most visits take a full day, and we leave the room as we found it.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Getting ready for the visit
- Mention any parking restrictions or tricky access
- Have a window or extractor fan available
- Avoid using the area for a few hours before we arrive
Getting a price
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Read more
Work for landlords and builders
For developers and builders, we fix damage before handover. Several plots can be done in one visit.
If you manage property in Glasson, we can repair and quote for several addresses together. Just send photos for each address and we’ll price them together.
Glasson questions
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
How durable is a resurfaced bath?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Is there a guarantee?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
How long is the bath unusable?
One day for most baths and can be used the day after. We give you timings with the quote.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Glasson.
Can you quote from pictures?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
What information do you need?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Should you replace it?
Replacing a bath generally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and normally one day, and the bath can be used the day after. Prices start from £350. We charge the same wherever you are, with no extra for Glasson. The job itself decides the price: how much damage, what it’s made of and how many items.
Why book with us
- Usually one visit, start to finish
- Fixed prices from your photos
- CHAS and Constructionline accredited
- Everything repaired in place
See our pricing and bath cost comparison.
More services for Glasson
Glasson and the surrounding area
Glasson is about 4 miles south-east of Heysham, in Lancashire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. We cover 482 places in Lancashire, from the larger towns to small villages. You can also see our page for Liverpool, about 41 miles away.
Every address in LA2 is covered, from the main roads to the quietest streets. That includes homes on West View, Tithebarn Hill and Ten Row and the roads around them. We also cover the places around Glasson: Sunderland (1 mile west), Upper Thurnham (1 mile south-east), Cockerham (3 miles south-east), Fisher's Row (5 miles south) and Winmarleigh (5 miles south). Within a short drive, we also cover Lancaster (4 miles north-east), Morecambe (5 miles north), Fleetwood (9 miles south-west), Thornton (11 miles south-west), Heysham (4 miles north-west) and Poulton-le-Fylde (12 miles south-west).
What’s near Glasson
In Glasson, that means homes near Christ Church and the streets around them. Glasson’s nearest station is Heysham Port station, roughly 3.6 miles north-west of the centre. Further afield, we also cover the area around Lancaster Castle (4 miles north-east) and Royal Lancaster Infirmary (3.7 miles north-east).
Common problems we fix in Glasson
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
These are the problems we’re asked about most:
- An old resurfacing that’s failing
- Thin, worn enamel in places
- An original cast iron bath that needs restoring
- An outdated colour you’d like to change
Before you book anyone
- What aftercare is recommended
- When it can be used again
- Whether the price is fixed and includes VAT
- Who will actually do the work
Honest limits
In fairness, some problems need a different fix:
- Acrylic that moves when you stand in it
- Damage hidden under a previous coating, until it’s stripped back
- Leaks from fittings rather than the bath
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
Aftercare tips
Simple care helps the repair last. Our advice:
- Use washing-up liquid and a soft cloth
- Don’t leave bottles, razors or sponges standing on the surface
- A quick wipe after use keeps limescale away
- Keep suction mats out of the bath
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
What your bath is made of matters
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
About our accreditations · Every repair comes with a one-year guarantee.
