Lancashire · England

Bath re-enamelling & resurfacing in Sunderland, Lancashire

Fixed-price bath re-enamelling in Sunderland and the surrounding area, done in a single visit in most cases and guaranteed for a year.

  • Resurfacing from £350
  • Wear marks under the taps
  • A coloured bath you want in white
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Sunderland

Bath re-enamelling in Sunderland without replacing anything

Re-enamelling gives a worn bath a new glossy surface without taking anything out. It’s the answer when the entire bath is tired rather than one spot. Common call-outs are for a coloured bath you want in white and a period or roll-top bath worth keeping, across Victorian roll-tops, cast iron baths and basins & shower trays.

You get a one-year guarantee, the same in Sunderland as everywhere else we work.

Before and after: an old basin refinished to bright white
Where
Sunderland (LA3)
County
Lancashire
Cover
12 months on all our work
Quotes
From £350. Free, fixed price from pictures
Phone
0345 017 0787
Last updated
23 October 2026

What we can’t put right

Honesty matters more than a booking, so here’s what a repair cannot fix:

  • Holes rusted through the metal
  • An acrylic bath that flexes badly underfoot
  • Anything hidden under an old coating, until we remove it

If in doubt, send photos and we’ll say what we think.

Materials we repair

  • Pressed steel baths
  • Cast iron baths
  • Acrylic baths
  • Victorian roll-tops
  • Basins & shower trays

What we do, step by step

Once we are through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes a full day, and we finish by cleaning up and talking you through the result.

  1. We sheet, mask and ventilate the room.
  2. We remove the old silicone and deep clean the bath.
  3. We repair chips, rust spots and pitting.
  4. We key the bath and apply a bonding primer.
  5. The new finish is sprayed on in several coats and left to cure.

Preparing for the visit

  • Move bottles, mats and clutter away from the area
  • Tell us if there are stairs or a lift
  • Let us know about parking or access

Get a quote

There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.

Send photos for a quote

Read more

Common questions in Sunderland

Will there be a smell?

There may be a mild smell during the work, which fades afterwards.

Is there a guarantee?

Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.

Can a failed resurfacing be redone?

Typically, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.

What happens next?

You get a fixed price and available dates. If anything’s unclear, we will ask for another photo.

Is there a call-out fee?

No. Our quotes include travel, with the same prices everywhere we work.

Do you need to take the bath out?

No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.

Does someone need to be in?

We need someone to let us in. You don’t need to watch us work.

It’s been repaired before. Can you still fix it?

Yes, we often do. It can add a little time, which we include in the quote.

Sunderland and the surrounding area

Sunderland is about 3 miles south of Heysham, in Lancashire. Jobs in Sunderland are booked in like any other job: a fixed quote from photos, then a visit to do the work. Sunderland is one of 482 towns and villages in Lancashire we cover. Our jobs stretch from Sunderland to Liverpool (about 41 miles away).

Every address in LA3 is covered. Other places close to Sunderland include Glasson (1 mile east), Upper Thurnham (2 miles south-east), Cockerham (3 miles south-east), Fisher's Row (5 miles south) and Stake Pool (5 miles south). We also work in nearby towns such as Lancaster (5 miles north-east), Morecambe (5 miles north), Fleetwood (8 miles south-west), Thornton (10 miles south-west), Heysham (3 miles north) and Poulton-le-Fylde (11 miles south-west).

Local landmarks in Sunderland

Typical jobs here are in homes near Mission Church, among other places. Sunderland’s nearest station is Heysham Port station, about 2.9 miles north-west of the centre. Other landmarks nearby include Royal Lancaster Infirmary (4.5 miles north-east) and Lancaster Castle (4.7 miles north-east).

Map of Sunderland © OpenStreetMap contributors

Landlord and trade work in Sunderland

Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.

Do you need bath re-enamelling in Sunderland?

The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.

These are the problems we’re asked about most:

  • Staining under the taps and around the waste
  • An outdated colour you’d like to change
  • A bath that stays dull however much you clean it
  • A peeling or bubbling previous coating

Before booking anyone

  • How your room will be protected
  • How to look after the finish
  • What happens if the damage is worse than the photos show
  • If travel is included in the price

10 questions to ask before booking

Keeping it looking good

Looking after the surface is easy:

  • Do not leave a chip unrepaired
  • Use washing-up liquid and a soft cloth
  • Fix dripping taps quickly
  • Leave the bath for the full curing time before using it

Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.

On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.

Repairs by material

Roll-top and period baths

We can resurface a roll-top inside and out, and the outside can be refinished too.

Pressed steel

Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.

Can I fix it myself?

If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

What affects the price in Sunderland

Resurfacing from £350. Quotes are free and the price is fixed. What we look at:

  • Access to the area
  • How many areas need work
  • What kind of damage it is
  • What the surface is made of

Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.

Send pictures for a quote

Good pictures mean an accurate price. Here’s what we find most useful:

  • A picture taken from further back
  • What it’s made of, if you know
  • Good light, ideally daylight, without flash glare
  • Any earlier repairs or coatings

For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.