Lancashire · England
Bath re-enamelling & resurfacing in Stake Pool, Lancashire
Full bath re-enamelling and resurfacing for homes and businesses in Stake Pool and across Lancashire. Free, fixed quotes from your photos.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- A coating lifting around the plughole
About our bath re-enamelling in Stake Pool
Most baths are re-enamelled in a day, and you can use the bath the day after. Taps, tiles, panels and plumbing all stay in place. We regularly repair acrylic baths, basins & shower trays and pressed steel baths, and people most frequently call us about a dull, rough surface that won’t come clean and a roll-top that’s seen better days.
You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll sort it.
- Area
- Stake Pool (PR3)
- County
- Lancashire
- Cover
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
How it works
There’s not much you need to do on the day. Let us in and show us the room, and we’ll take it from there. Most visits take the best part of a day, tidy-up included.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the following day.
Preparing for the visit
- Keep children and pets away from the room on the day
- Open a window if you can
- Tell us about any previous repairs or coatings
Ask for a price
To get a price, send a couple of pictures through our quote form or ring us. We will tell you honestly if a repair is the right fix.
Read more
Signs you need bath re-enamelling in Stake Pool
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.
Get in touch if you’ve noticed:
- Stains that won’t shift
- Wear marks under the taps
- An original cast iron bath that needs restoring
- Lots of chips and rust spots
Before booking anyone
- Whether cleaning and preparation are in the price
- What aftercare is recommended
- How soon you can use it again
- What protection goes down before work starts
Stake Pool and nearby
Stake Pool is about 6 miles east of Fleetwood, in Lancashire. Whether you are in the middle of Stake Pool or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Stake Pool is one of 482 places in Lancashire where we work. We work right across the region, from Stake Pool to Liverpool (36 miles away).
Our visits in PR3 work the same way as everywhere else we cover. From Williams Way, Georges Grove and Garstang Road or a nearby road, we can come to you. If you’re just outside Stake Pool, we cover Scronkey (1 mile south-west), Fisher's Row (1 mile north-west), Winmarleigh (3 miles east), Cockerham (4 miles north-east) and Upper Thurnham (5 miles north-east). Within a short drive, we also cover Preston (13 miles south-east), Lancaster (10 miles north-east), Lytham St Anne's (13 miles south), Morecambe (10 miles north), Fulwood (12 miles south-east) and Fleetwood (6 miles west).
Around Stake Pool
In Stake Pool, that means homes near Old St John the Baptist's Church and St William's Catholic Primary School, among other places. Nearby you’ll also find Fleetwood Hospital (4.9 miles west). Green spaces nearby include Winmarleigh and Cockerham Moss.
What we cannot put right
We’d rather lose a job than do one that won’t last, so here’s what a repair can’t put right:
- Damage hidden under a previous coating, until it’s stripped back
- A metal bath with a through crack
- Leaks from fittings rather than the bath
Not sure? Send photos and we’ll give you a straight answer before you book.
Surfaces we repair
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
Looking after it afterwards
Much of the damage we repair could have been avoided. A few tips:
- Keep suction mats out of the bath
- Get any chip repaired quickly
- Store bottles off the bath
- Wash away dyes and oils after use
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
For landlords and businesses
We’re used to working with agents and managing companies. Send the address, photos and access details and we will handle the rest.
For anyone letting property in or around Stake Pool, we can repair and quote for several addresses together. Just send pictures for each address and we will price them together.
Your questions about bath re-enamelling in Stake Pool
Can you repair several things at once?
Yes. Doing several items on one visit typically costs less than separate visits. Include photos of each item.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.
Will there be fumes?
A little, during the work. We set up ventilation and the smell fades as it cures.
What happens next?
You get a fixed quote and available dates. If anything’s unclear, we’ll ask for another photo.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
When can you do it?
We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Is it worth repairing rather than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
Is there a guarantee?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Can I fix it myself?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we check it carefully.
How we price bath re-enamelling
Resurfacing from £350. Every quote is fixed and free. What we take into account:
- The type of damage
- How easy the damage is to reach
- Doing more than one item at once
- Unusual colours or finishes
A repair is priced on what needs doing, not where you live. You will see the full price before you book.
Quotes from your photos
Two or three clear pictures are normally enough. Try to include:
- A coin beside the damage so we can judge size
- A clear, close picture of the problem area
- Details of any past repairs
- Any details about the material
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Also near Stake Pool
Also in Stake Pool
About our accreditations · Every repair comes with a one-year guarantee.
