Dorset · England
Bath Re-enamelling in Godmanstone
We travel to Godmanstone for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- Wear marks under the taps
- A roll-top that is seen better days
Bath re-enamelling at your home in Godmanstone
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Typical jobs include a roll-top that’s seen better days and brown or grey marks that don’t clean off, in basins & shower trays, pressed steel baths and Victorian roll-tops.
Every repair is covered by a one-year guarantee, wherever you are in Dorset.
- Location
- Godmanstone (DT2)
- Region
- Dorset
- Cover
- A year, on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What we do, step by step
There’s not much you need to do on the day. Show us the job, point us to the room, and we’ll take it from there. Most visits take a full day, including clearing up.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Plan for the room to be out of bounds to pets and children
- Tell us about any previous repairs or coatings
- Have somewhere for us to park nearby if possible
Ask for a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.
Read more
Keeping it looking good
Good habits make a big difference to how long a repair lasts:
- Respect the curing time we give you
- Wash away dyes and oils after use
- Avoid suction-cup mats
- Keep toiletries on a shelf rather than in the bath
The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
For landlords and businesses
We work for landlords, letting agents and housing providers in Godmanstone as well as homeowners. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
How we price bath re-enamelling
Prices start from £350. There’s no area surcharge for Godmanstone. What changes the price is:
- How hard the colour is to match
- The size and number of damaged areas
- Doing more than one item at once
- What kind of damage it is
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Quotes from your photos
Almost every job we do is priced from pictures. This is what to send:
- A coin beside the damage so we can judge size
- Your postcode, so we can check dates
- Any details about the material
- Whether it’s been repaired or coated before
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and we will reply with a fixed price. Quotes are free and you are under no obligation.
Honest limits
It helps to know what we can’t do:
- A cast iron or steel bath that’s cracked right through
- A poorly supported acrylic bath, until it’s firmed up
- A bath that’s rusted through
Send us pictures and we’ll tell you honestly.
Materials we work on in Godmanstone
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
Why repair rather than replace?
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one isn’t cheap. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. Our prices are the same across the UK, with no extra for Godmanstone. The job itself decides the price: the material, the amount of damage and how many items.
What you get with us
- Work done at your home or business
- No extra charge for your area
- Colour mixed on the day to match
- Free fixed quotes from pictures
Take a look at our prices page or guide to resurfacing and replacement costs.
Godmanstone and the surrounding area
Godmanstone is about 4 miles north of Dorchester, in Dorset. Customers in Godmanstone get the same service as everywhere else we cover: a fixed price from your photos, and a technician at your door on the day. Godmanstone is one of 462 towns and villages in Dorset we cover.
We cover every part of DT2. Neighbouring places we cover include Charlton Down (2 miles south-east), Stratton (2 miles south), Bradford Peverell (3 miles south), Charminster (3 miles south) and White Lackington (3 miles east). Further out, we also cover Weymouth (11 miles south), Dorchester (4 miles south), Bridport (13 miles west), Blandford Forum (15 miles north-east), Sherborne (12 miles north) and Portland (15 miles south).
Landmarks near Godmanstone
Our customers here include homes close to Church of Holy Trinity and the streets around them. The closest station to Godmanstone is Maiden Newton station, roughly 4.1 miles west. Further afield, we also cover the area around Herrison Hospital (1.6 miles south-east). Green spaces nearby include Hog Cliff and Nunnery Mead.
Different materials, different repairs
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Questions from Godmanstone
How much does bath re-enamelling cost in Godmanstone?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Do you need to take the bath out?
No. We resurface it in place, so nothing else is disturbed.
Will there be fumes?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Do you work in Godmanstone?
Yes. We cover the entire UK and travel to Godmanstone and the rest of Dorset. Send us pictures for a fixed quote, or call 0345 017 0787.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
How long is the bath unusable?
One day for most baths, ready the day after. We give you timings with the quote.
Can you make a coloured bath white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Places near Godmanstone
Also in Godmanstone
About our accreditations · Every repair comes with a one-year guarantee.
