Dorset · England
Bath re-enamelling & resurfacing in Stratton, Dorset
Full bath re-enamelling and resurfacing at your home in Stratton, with a one-year guarantee on every repair.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- A peeling or bubbling previous coating
Stratton: your questions answered
Do you resurface freestanding baths?
Yes. Inside and out if you’d like.
Does the bath have to be removed?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
Can pets and children be at home?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
How soon can you come?
We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Do you cover Stratton?
Yes. We cover the whole UK and come to Stratton and the rest of Dorset. Send us photos for a fixed quote, or call 0345 017 0787.
Are there extra charges for Stratton?
We don’t add a call-out fee. Your fixed quote includes everything.
Bath re-enamelling at your home in Stratton
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. We are often asked to fix a dull, rough surface that won’t come clean and lots of chips and rust spots, in basins & shower trays, cast iron baths and Victorian roll-tops.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Where
- Stratton (DT2)
- County
- Dorset
- Cover
- One year on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Places near Stratton
Also in Stratton
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
Why repair rather than replace?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and normally a day, with the bath back in use the following day. Our bath re-enamelling starts from £350. The price reflects the work involved, not where you live. The full price is agreed before you book, with nothing added on the day.
What you get with us
- Honest advice, even when it means no job
- Colours mixed by hand to suit your surface
- Most jobs done in one visit
- Work done at your home or business
Read our pricing or bath cost comparison.
When a repair isn’t the answer
In fairness, some problems need a different fix:
- Anything hidden under an old coating, until we remove it
- A cast iron or steel bath that’s cracked right through
- Plumbing leaks, which need a plumber
Send us photos and we’ll tell you honestly before booking.
Surfaces we repair
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
How we price bath re-enamelling
Prices start from £350. We price every job individually, from your photos. What matters most is:
- How easy the damage is to reach
- Any earlier repairs that need removing first
- What the surface is made of
- How hard the colour is to match
What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your photos, so you know the cost before you book.
How to get a fixed price
A couple of clear pictures is all it takes. Try to include:
- Something in shot to show the size
- A close-up of the damage, in focus
- Where you are, by postcode
- Details of any past repairs
If you’re in Stratton and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Work for landlords and builders
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
How the visit works
We begin by going over the job with you. After that, protection goes down around the work area and we start. Allow the best part of a day, and we’ll tell you if anything changes.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Mention if the room is upstairs or in a flat
- Have a window or extractor fan available
- Keep a parking space free if you can
Get a quote
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Advice
Signs you need bath re-enamelling in Stratton
Hard water speeds up the wear, and abrasive cleaners do the most damage.
Signs it’s time to call us include:
- Brown or grey marks that do not clean off
- Worn patches where water runs and sits
- A bath in a colour that no longer suits
- Lots of chips and rust spots
Before you book anyone
- How to look after the finish
- If travel is included in the price
- What happens if they find more damage
- What prep work is covered
Our work in Stratton
Stratton is about 3 miles north-west of Dorchester, in Dorset. Clients in Stratton get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. We work in all 462 towns and villages across Dorset.
Jobs in DT2 work the same way as everywhere else we cover. We regularly work on streets such as Dorchester Road, Bull Close and Mill Lane and the roads around them. If you are just outside Stratton, we cover Bradford Peverell (1 mile south-east), Charminster (2 miles east), Charlton Down (2 miles north-east), Godmanstone (2 miles north) and Dorchester (3 miles south-east). We also work in nearby towns such as Weymouth (9 miles south), Bridport (11 miles west), Sherborne (14 miles north), Portland (14 miles south), Rodwell (9 miles south) and Melcombe Regis (9 miles south).
Landmarks near Stratton
Around Stratton, we work in homes near Church of St Mary, among other places. Stratton’s nearest station is Dorchester West station, roughly 3.2 miles south-east. Nearby you will also find Herrison Hospital (1.7 miles east) and Tutankhamun Exhibition (3.1 miles south-east). Not far away are Hog Cliff and Nunnery Mead.
Materials and what they mean for the repair
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
About our accreditations · Every repair comes with a one-year guarantee.
