Dorset · England
Bath re-enamelling & resurfacing in Bradford Peverell, Dorset
Full bath re-enamelling and resurfacing in Bradford Peverell, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Staining under the taps and around the waste
- A dull, rough surface that will not come clean
How we price bath re-enamelling
Prices start from £350. We give every job a fixed price from photos. These are the things that affect it:
- Unusual colours or finishes
- How many areas need work
- Any earlier repairs that need removing first
- The material
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
Getting a price from photos
Phone photos are fine, there’s no need for anything special. Just make sure we can see:
- A coin or ruler next to the damage for scale
- Whether it’s been repaired or coated before
- Your postcode, so we can check dates
- Daylight if possible, and no flash reflection
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Bath re-enamelling at your home in Bradford Peverell
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. We regularly repair pressed steel baths, cast iron baths and Victorian roll-tops, and common reasons people get in touch are an original cast iron bath that needs restoring and a bath in a colour that no longer suits.
Every repair comes with our one-year guarantee.
- Location
- Bradford Peverell (DT2)
- Area hub
- Dorset
- Guarantee
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Nearby places to Bradford Peverell
Other services in Bradford Peverell
When we’d advise against a repair
A few problems are outside what a surface repair can do:
- Damage hidden under a previous coating, until it’s stripped back
- Holes rusted through the metal
- Plumbing leaks, which need a plumber
Not sure? Send photos and we will give you a straight answer before booking.
What we work on
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
Your questions about bath re-enamelling in Bradford Peverell
Which areas do you work in?
Everywhere in the UK, Bradford Peverell included. Travel is included in the price.
Will the new finish last?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Will the price change on the day?
The price is fixed for what the pictures show. If there’s more, we’ll tell you before starting.
Can a failed resurfacing be redone?
Normally, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Can you do the outside of a roll-top?
Yes, often. We resurface the inside, and the outside can be refinished too.
Do you charge for travel?
We don’t add a call-out fee. The fixed price covers the visit and the work.
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Do the materials smell?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum, and it soon fades.
DIY kit or professional repair?
If you are set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we check it carefully.
What we are called out for in Bradford Peverell
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
Most people get in touch after spotting one of these:
- A coating lifting around the plughole
- Wear marks under the taps
- Lots of chips and rust spots
- An original cast iron bath that needs restoring
Comparing quotes
- Whether there are any call-out or travel charges
- Is the price fixed, and does it include VAT?
- Whether a trained technician does the job
- How your room will be protected
Our work in Bradford Peverell
Bradford Peverell is about 2 miles north-west of Dorchester, in Dorset. Clients in Bradford Peverell get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. Bradford Peverell is one of 462 places in Dorset we cover.
Here we cover the DT2 postcode area. You will find streets such as Church Lane, Manor Lane and Yew Tree Lane, all of which we cover. Neighbouring places we cover include Stratton (1 mile north-west), Charminster (1 mile east), Charlton Down (2 miles north-east), Dorchester (2 miles south-east) and Godmanstone (3 miles north). Within a short drive, we also cover Weymouth (8 miles south), Bridport (12 miles west), Sherborne (15 miles north), Portland (13 miles south), Rodwell (9 miles south) and Melcombe Regis (8 miles south).
What’s near Bradford Peverell
In Bradford Peverell, that means homes near Church of St Mary, The Thomas Hardye School and St Mary's Church of England First School, among other places. The nearest railway station is Dorchester West station, roughly 2.5 miles south-east. Well-known places in the area include Tutankhamun Exhibition (2.5 miles south-east) and Herrison Hospital (1.6 miles north-east). The countryside around Bradford Peverell includes Nunnery Mead and Hog Cliff.
How the visit works
Visits start with a quick look at the job together. After that, protection goes down around the work area and the work begins. You can expect it to take most of the day, and we’ll tell you if anything changes.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s usually ready the following day.
Getting ready for the visit
- Let us know about parking or access
- Have somewhere for us to park nearby if possible
- Ensure the area is dry
Get a quote
If you are in Bradford Peverell and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Related advice
Repair or replace: which is better?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. We don’t add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- Technicians who travel to you, UK-wide
- Typically one visit, start to finish
- Colour mixed on the day to match
- Rooms protected and left tidy
Take a look at our full price list and guide to resurfacing and replacement costs.
Aftercare tips
Simple care helps the repair last. We recommend:
- Rinse off hair dye, oils and bath bombs straight away
- Store bottles off the bath
- Leave the bath for the full curing time before using it
- Don’t leave a chip unrepaired
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
About our accreditations · Every repair comes with a one-year guarantee.
