Perth and Kinross · Scotland
Bath Re-enamelling in Guildtown
Full bath re-enamelling and resurfacing in Guildtown, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Thin, worn enamel in places
- An old resurfacing that is failing
Bath re-enamelling at your home in Guildtown
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Our repair technicians work on acrylic baths, basins & shower trays and pressed steel baths, and people most frequently call us about stains that won’t shift and a peeling or bubbling previous coating.
All our work is covered by our one-year guarantee.
- Location
- Guildtown (PH2)
- Region
- Perth and Kinross
- Cover
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Landlord and trade work in Guildtown
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
Covering Guildtown
Guildtown is about 5 miles north of Perth, in Perth and Kinross. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Guildtown is one of 107 places in Perth and Kinross we cover. Our nearest city page is Edinburgh, about 37 miles away.
All of PH2 is within our area. You’ll find streets such as Oakbank Road, Northfield Road and Main Road, all of which we cover. We also travel to Stanley (2 miles west), West Tofts (2 miles north-west), Stormontfield (2 miles south-west), Luncarty (3 miles south-west) and Scone (4 miles south). Within a short drive, we also cover Perth (5 miles south), Blairgowrie and Rattray (8 miles north), Letham (6 miles south-west), Alyth (12 miles north-east), Coupar Angus (7 miles north-east) and Oakbank (6 miles south).
Local landmarks in Guildtown
Locally, our jobs take us to homes close to Cambusmichael Church and Stobhall New Library. Further afield, we also cover the area around Perth Royal Infirmary (5 miles south) and Inchbervis Castle (0.8 miles north-west). Not far away are Dunsinane Hill and Lily Loch.
When to call us in Guildtown
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Common reasons people in Guildtown contact us are:
- Enamel that’s lost its shine and feels rough
- Stains that won’t shift
- An old resurfacing that is failing
- A period or roll-top bath worth keeping
Comparing quotes
- Who turns up on the day
- Whether the colour is mixed to match
- Aftercare advice
- Is the price fixed, and does it include VAT?
Nearby places to Guildtown
Also in Guildtown
What bath re-enamelling costs
Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:
- What kind of damage it is
- How hard the colour is to match
- How much damage there is
- The material and finish
Our prices are the same across the UK, so there is no premium for Guildtown. What changes the price is the job itself: the material, the amount of damage and how many items.
How to get a fixed price
Phone photos are fine. Make sure they show:
- A picture taken from further back
- Details of any past repairs
- What it’s made of, if you know
- Natural light rather than flash
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Honest limits
Honesty matters more than a booking, so here’s what a repair will not do:
- Acrylic that moves when you stand in it
- A bath split right through the body
- A bath that is rusted through
If in doubt, send pictures and we’ll say what we think.
Materials we work on in Guildtown
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Acrylic baths
Should I try a DIY kit first?
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
How the visit works
On the day itself, there is little for you to do. Let us in and show us the room, and we will get on with it. The job generally runs to a full day, tidy-up included.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Point us to the nearest place to park
- Avoid using the area for a few hours before we arrive
- Clear the area around the damage
Get a quote
The quickest way to a price is to send a couple of pictures using our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
Read more
FAQs for Guildtown
Can you quote from pictures?
In nearly every case. If photos don’t show enough, we’ll ask for another angle.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
Do you resurface freestanding baths?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Can you resurface a pink bath in white?
Yes, most people go for white. Mention the colour you want when you send pictures.
Can a failed resurfacing be redone?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Do you need to take the bath out?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
Aftercare tips
Nothing complicated is needed:
- Do not let dyes or oils sit on the finish
- Don’t leave a chip unrepaired
- Stick to gentle, non-abrasive cleaners
- Dry the bath after use to stop limescale
Use mild, non-abrasive cleaners, do not use suction bath mats, and don’t leave bottles or razors standing on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
About our accreditations · Every repair comes with a one-year guarantee.
