Lincolnshire · England
Bath Re-enamelling in Hagnaby
Full bath re-enamelling and resurfacing for homes and businesses in Hagnaby and across Lincolnshire. Free, fixed quotes from your pictures.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Enamel that is lost its shine and feels rough
Bath re-enamelling in Hagnaby without replacing anything
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Typical jobs include an outdated colour you’d like to change and a roll-top that’s seen better days, in cast iron baths, pressed steel baths and basins & shower trays.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Where
- Hagnaby (PE23)
- County
- Lincolnshire
- Cover
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
The process
The work is clean and fairly quiet, so you can stay at home while we are there. We protect the area first, then the work takes the best part of a day. Before we leave, we explain how soon it can be used and how to care for it.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Let us know if it has been repaired before
- Tell us about parking, stairs or access
- Have a window or extractor fan available
How to get a price
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and we’ll reply with a fixed price. Quotes are free and no obligation.
Advice
For landlords and businesses
For anyone letting property in or around Hagnaby, we can repair and quote for several addresses together. Send pictures for each one and we will price them together.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Repair or replace in Hagnaby?
A replacement frequently means several trades over several days. Resurfacing takes one technician and usually a day, and the bath is usable the day after. Prices start from £350. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Why us?
- Most jobs done in one visit
- Repair technicians who travel to you, UK-wide
- Dust sheets down, tidy finish
- One price list for the whole UK
See our full price list and bath cost comparison.
Towns and villages near Hagnaby
Also in Hagnaby
Hagnaby: your questions answered
What happens after I send photos?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Do you need to take the bath out?
No. We resurface it in place, so nothing else is disturbed.
What happens if you find more damage?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
Can you repair something that is been repaired before?
Usually, yes. The old repair comes out first, so let us know about it.
Will the new finish last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Is there any odour?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
Repairs by material
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.
DIY kit or professional repair?
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
What we are called out for in Hagnaby
Many baths we resurface have simply been well used, with nothing wrong except the surface. The body of the bath is typically perfectly sound.
Typical reasons for a call-out include:
- Worn patches where water runs and sits
- An original cast iron bath that needs restoring
- An outdated colour you’d like to change
- A bath that stays dull however much you clean it
Questions to ask before you book
- What prep work is covered
- How to care for the finish
- Whether the price covers travel
- Is the price fixed, and does it include VAT?
Prices and what affects them
Prices start from £350. Each job gets its own fixed quote. This is what makes a difference:
- How easy the damage is to reach
- Any earlier repairs that need removing first
- How much damage there is
- The material
A repair usually costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
How to get a fixed price
We price nearly every job from photos. This is what we need:
- The material, if you know it
- Your postcode, so we can check dates
- A photo taken from further back
- A coin or ruler next to the damage for scale
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
What a repair can’t fix
Not everything can be repaired, and we would rather say so up front. We can’t fix:
- A bath that’s rusted through
- Anything hidden under an old coating, until we remove it
- Acrylic that moves when you stand in it
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
About Hagnaby
Hagnaby is about 12 miles north of Boston, in Lincolnshire. Our technicians come to homes and businesses in Hagnaby and nearby villages, so there is no workshop to go to. We work in all 732 towns and villages in Lincolnshire, from the larger towns to small villages. Our jobs stretch from Hagnaby to Leeds (79 miles away).
Our visits in PE23 work the same way as everywhere else we cover. Other places close to Hagnaby include East Kirkby (1 mile west), Old Bolingbroke (1 mile north), Keal Cotes (1 mile east), West Keal (2 miles east) and Stickford (2 miles south-east). Further out, we also cover Boston (12 miles south), Louth (15 miles north), Skegness (13 miles east), Horncastle (7 miles north-west), Woodhall Spa (9 miles west) and Witham (11 miles south).
What’s near Hagnaby
Around Hagnaby, we work in homes near Church of St Andrew and the streets around them. Not far away are Thornbury Hill.
About our accreditations · Every repair comes with a one-year guarantee.
