Flintshire · England
Bath re-enamelling & resurfacing in Higher Kinnerton, Flintshire
Damaged bath in Higher Kinnerton? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- An old resurfacing that is failing
- Several chips and rust patches
Bath re-enamelling in Higher Kinnerton, done in place
When a bath is structurally fine but worn out on the surface, re-enamelling is normally the most cost-effective option. There is no removal, plumbing or tiling involved. If you’re dealing with lots of chips and rust spots and an old resurfacing that’s failing, we can help.
Peace of mind is built in: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Location
- Higher Kinnerton (CH4)
- Region
- Flintshire
- Cover
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Why repair rather than replace?
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why us?
- Rooms protected and left tidy
- No need to remove anything
- Free fixed quotes from pictures
- Colour mixed on the day to match
Take a look at our pricing and bath cost comparison.
Higher Kinnerton: your questions answered
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
What happens after I send photos?
We review the pictures and send a fixed quote.
Does re-enamelling smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How long will the bath be out of use?
One day for most baths, ready the following day. We give you timings with the quote.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Can I fix it myself?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
How it works
Here’s how a visit generally runs: we arrive on time, sheet and mask the area around the job, do the job and clear up. Allow a full day from start to finish. Before leaving, we tell you when it can be used and how to care for it.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Tell us about parking, stairs or access
- Clear the area around the damage
- Open a window if you can
Getting a price
To get a price, send two or three pictures using our quote form or call us. We’ll tell you honestly whether it can be repaired.
Advice
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Towns and villages near Higher Kinnerton
What else we do in Higher Kinnerton
What a repair can’t fix
It helps to know what we can’t do too:
- Problems we cannot see until an old finish comes off
- A metal bath with a through crack
- Acrylic that moves when you stand in it
Send us photos and we’ll tell you honestly before booking.
Materials we work on in Higher Kinnerton
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
Signs you need bath re-enamelling in Higher Kinnerton
Frequently the bath has just had decades of use, and only the surface is worn. The body of the bath is generally perfectly sound.
Send us a picture if you notice any of these:
- Wear marks under the taps
- Lots of chips and rust spots
- An original cast iron bath that needs restoring
- A dull, rough surface that won’t come clean
Comparing quotes
- Whether the price covers travel
- What protection goes down before work starts
- Whether they match the colour on site
- What happens if the damage is worse than the pictures show
How we price bath re-enamelling
Prices start from £350. We price every job individually, from your photos. What matters most is:
- How many items we do on one visit
- Access to the area
- Whether it’s a chip, crack, burn or wear
- How many areas need work
The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed quote from your photos, so you know the cost before you book.
Quotes from your pictures
Most quotes are done from pictures alone. To help us price it:
- One sharp close-up of the damage
- Daylight if possible, and no flash reflection
- The postcode, so we can plan the visit
- A coin or ruler next to the damage for scale
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed price. Quotes are free and no obligation.
Aftercare tips
How the surface is treated afterwards matters. Here’s what we suggest:
- Use washing-up liquid and a soft cloth
- Don’t leave a chip unrepaired
- A quick wipe after use keeps limescale away
- Repair dripping taps early
Dry the bath after use if possible, especially in hard water areas, and rinse off any bath products.
Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.
Our work in Higher Kinnerton
Higher Kinnerton is about 4 miles south-east of Bwcle, in Flintshire. Anywhere in CH4, we come to you. Higher Kinnerton is one of 139 places in Flintshire where we work. We work right across the region, from Higher Kinnerton to Liverpool (about 18 miles away).
We work across CH4. Local streets include Meadowcroft, Springfield Close and Eccleston Road, and we cover them all. Close by, we cover Babylon (1 mile south-west), Old Warren (1 mile north-west), Penymynydd (2 miles north-west), Penyffordd (2 miles west) and Dobs Hill (2 miles north-west). Further out, we also cover Connah's Quay (6 miles north-west), Buckley (4 miles north-west), Bwcle (4 miles north-west), Flint (9 miles north-west), Saltney (4 miles north-east) and Mold (6 miles west).
What’s near Higher Kinnerton
Our customers here include homes close to All Saints Church, Castell Alun High School and Ysgol Derwen, among other places. The closest station to Higher Kinnerton is Penyffordd station, roughly 2.2 miles west. Nearby you will also find Buckley Library (3.6 miles north-west) and Trevalyn Manor (3.8 miles south-east). The countryside around Higher Kinnerton includes Padeswood Pool and Caer Estyn.
About our accreditations · Every repair comes with a one-year guarantee.
