Flintshire · England
Bath Re-enamelling for Babylon homes
Full bath re-enamelling and resurfacing at your home in Babylon, with a one-year guarantee on every repair.
- Resurfacing from £350
- Staining under the taps and around the waste
- Wear marks under the taps
Bath re-enamelling in Babylon without replacing anything
Re-enamelling is a one-day job for most baths, and you can use the bath the next day. Taps, tiles, panels and plumbing all stay in place. Whether it’s thin, worn enamel in places and a bath in a colour that no longer suits, we can help, whatever the material.
We stand behind the work with a one-year guarantee.
- Where
- Babylon (CH4)
- County
- Flintshire
- Warranty
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Where we work around Babylon
Babylon is about 4 miles south-east of Bwcle, in Flintshire. Wherever you are in the CH4 postcode area, a technician comes to you. Babylon is one of 139 towns and villages in Flintshire we cover. Our nearest city page is Liverpool, about 19 miles away.
Here we cover the CH4 postcode area. Jobs here include addresses on Main Road, Kirkett Avenue and Bennett's Lane. Neighbouring places we cover include Higher Kinnerton (1 mile north-east), Old Warren (2 miles north), Penyffordd (2 miles west), Penymynydd (2 miles north-west) and Yr Hôb (2 miles south-west). We also work in nearby towns such as Connah's Quay (6 miles north-west), Buckley (4 miles north-west), Bwcle (4 miles north-west), Flint (9 miles north-west), Saltney (4 miles north-east) and Mold (6 miles west).
Near you in Babylon
We visit homes around Ysgol Derwen, All Saints Church and Castell Alun High School. For rail, the closest station is Penyffordd station, roughly 2 miles west. Other landmarks nearby include Caergwrle Castle (2.6 miles south-west) and Broughton Shopping Park (2.3 miles north-east). Open spaces near Babylon include Caer Estyn and Padeswood Pool.
Looking after it afterwards
So the finish stays in good condition for years:
- Wipe the bath dry after use in hard water areas
- Stick to gentle, non-abrasive cleaners
- Don’t use the bath until it has fully cured
- Have chips seen to early
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
Landlords, agents and businesses in Babylon
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
We’re used to working with agents and managing companies. Just send photos, the address and how to get access.
Repairing versus replacing in Babylon
If the bath is sound, re-enamelling is typically much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Resurfacing from £350, with every job priced individually. Compared with replacing, a repair is normally a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Why us?
- CHAS, Constructionline and SafeContractor accredited
- We come to you, anywhere in the UK
- One visit for most repairs
- Honest advice, even when it means no job
See our full price list and guide to resurfacing and replacement costs.
Also in Babylon
What we can’t put right
Some problems need a builder, plumber or fitter rather than us:
- Plumbing leaks, which need a plumber
- A cast iron or steel bath that is cracked right through
- A bath that’s rusted through
Not sure? Send pictures and we will give you a straight answer.
Materials we work on in Babylon
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Acrylic baths
How the visit works
Nothing needs to be moved out of the room. Everything we use comes in the van with us, put protection down and start once you are happy with the plan. It normally takes a full day, and you can get on with other things while we’re there.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Have somewhere for us to park nearby if possible
- Mention if the room is upstairs or in a flat
- Plan for the room to be out of bounds to pets and children
How to get a price
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Advice
What we are called out for in Babylon
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Send us a picture if you notice any of these:
- A coloured bath you want in white
- Enamel that’s lost its shine and feels rough
- A coating lifting around the plughole
- Staining under the taps and around the waste
Comparing quotes
- Whether they match the colour on site
- What protection goes down before work starts
- The length of the guarantee and what it covers
- If travel is included in the price
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Babylon questions
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
Can you fix a peeling bath coating?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Can you do more than one item on the same visit?
Of course, and it generally saves money. Just add the extra items to your photos and we will quote them together.
What do you need from me?
Use the quote form or ring 0345 017 0787, and we will do the rest.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
What areas do you cover?
The whole UK, including all of Flintshire. Just include your postcode and we will offer you dates.
It’s been repaired before. Can you still fix it?
In most cases. We remove the old repair before doing a new one, so mention it when you send photos.
How we price bath re-enamelling
Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:
- The material and finish
- How many items we do on one visit
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Getting a price from pictures
Before you send photos, these tips help us give you a firm price:
- A close-up of the damage, in focus
- Daylight if possible, and no flash reflection
- A wider photo showing the entire bath
- The material, if you know it
There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
About our accreditations · Every repair comes with a one-year guarantee.
