Flintshire · England

Bath Re-enamelling for Higher Shotton homes

Damaged bath in Higher Shotton? We repair it in place, match it on site and back it with a one-year guarantee.

  • Resurfacing from £350
  • Enamel that is lost its shine and feels rough
  • Wear marks under the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Higher Shotton

Bath re-enamelling at your home in Higher Shotton

We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we do not cut corners on it. Whether it’s thin, worn enamel in places and a bath that stays dull however much you clean it, we can help.

You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.

Before and after: an old basin refinished to bright white
Area
Higher Shotton (CH5)
Area hub
Flintshire
Cover
A year, on every repair
Price
From £350. Free and fixed, from your pictures
Telephone
0345 017 0787
Page updated
23 October 2026

What bath re-enamelling costs

Resurfacing from £350. Every quote is fixed and free. What we look at:

  • The type of damage
  • Unusual colours or finishes
  • How easy the damage is to reach
  • Doing more than one item at once

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.

Send pictures for a quote

A couple of clear pictures is all it takes. It helps if you send:

  • A close-up of the damage, in focus
  • A coin or ruler next to the damage for scale
  • The postcode, so we can plan the visit
  • Good light, ideally daylight, without flash glare

For a price in Higher Shotton, photos are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.

Should you replace it?

If the bath is sound, re-enamelling is normally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it, and doing several items at once reduces it.

Why choose Surface Doctor in Higher Shotton

  • Nothing taken out or refitted
  • A year’s guarantee on all work
  • Colour-matched on site
  • One visit for most repairs

Read our pricing and bath cost comparison.

Work for landlords and builders

Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.

For anyone letting property in or around Higher Shotton, we can repair and quote for several addresses together. Send pictures for each one and we will price them together.

What your bath is made of matters

Roll-top and period baths

Freestanding roll-tops can be done inside and out, with the outside refinished as well.

Cast iron

Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.

Can I fix it myself?

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.

For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

Our work in Higher Shotton

Higher Shotton is about 6 miles west of Chester, in Flintshire. Anywhere in CH5, we carry out the work at your property. Our repair technicians cover 139 places in Flintshire. You can also see our page for Liverpool, about 15 miles away.

We work across CH5 and the streets around it. Whether you live on Elm Road, Dale Road and Aston Road or anywhere nearby, we can come to you. Neighbouring places we cover include Shotton (1 mile north-east), Wepre (1 mile north), Queensferry (1 mile east), Pentre (1 mile east) and Connah's Quay (1 mile north-west). Larger places within reach include Buckley (3 miles south-west), Bwcle (3 miles south-west), Flint (5 miles north-west), Saltney (5 miles east), Mold (5 miles south-west) and Holywell (9 miles north-west). Being one of Flintshire’s larger places, Higher Shotton is somewhere we visit frequently.

What’s near Higher Shotton

Our clients here include homes close to Ven. Edward Morgan R.C. Primary School, John Summers High School and Gladstone's Library. You will also find Wepre Park (0.7 miles west), The Melrose Inn (under half a mile east) and St Ethelwold's Church (0.5 miles north-east). For rail, the closest station is Shotton station, about 0.7 miles north of the centre. Well-known places in the area include Ewloe Castle (1 mile west) and Broughton Shopping Park (3.8 miles south-east). The countryside around Higher Shotton includes Shotwick Lake and Deeside Nature Reserve.

  • Parks and local facilities nearby include West Saltney (2.1 miles east)
Map of Higher Shotton © OpenStreetMap contributors

What we do, step by step

Arrival times are agreed in advance, so you know when to expect us. On site, it takes a full day. We leave the room clean and you will know when it can be used.

  1. The bathroom is protected and ventilation set up.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. The new finish is sprayed on in several coats and left to cure.

How to prepare

  • Mention any earlier repairs or resurfacing
  • Let us know about parking or access
  • Make sure the area is dry

Get a quote

There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

Get a free quote

Advice

Signs you need bath re-enamelling in Higher Shotton

A dull surface stains and holds dirt, and cleaning harder only makes it worse. That is the point where re-enamelling makes sense.

It’s worth getting a quote if you see:

  • An original cast iron bath that needs restoring
  • Staining under the taps and around the waste
  • A peeling or bubbling previous coating
  • Thin, worn enamel in places

What your quote should include

  • How long it needs to cure
  • What aftercare is recommended
  • Whether a trained technician does the job
  • How long the guarantee is and what it covers

10 questions to ask before booking

Higher Shotton questions

Is it worth repairing rather than replacing?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.

Do you charge for travel?

There is no separate call-out charge. Your fixed quote includes everything.

How long does re-enamelling last?

It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.

Will the bath be moved?

Not at all. Everything is done in your bathroom, with the room protected and ventilated.

Can you fix a peeling bath coating?

Yes. Stripping the old coating adds time, so it’s reflected in the quote.

Can you quote from pictures?

Yes, almost always. Clear pictures let us give you a fixed quote without visiting.

Can you make a coloured bath white?

Yes, most people go for white. Mention the colour you want when you send pictures.

Can you repair several things at once?

Of course, and it generally saves money. Send pictures of everything together and you’ll get one combined price.

Keeping it looking good

To keep it looking its best:

  • Stick to gentle, non-abrasive cleaners
  • Fix dripping taps quickly
  • Leave the bath for the full curing time before using it
  • Store bottles off the bath

Wipe the bath dry after use where you can, and rinse off any bath products.

Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.