Flintshire · England
Bath re-enamelling & resurfacing in Queensferry, Flintshire
We travel to Queensferry for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Chips and rust in more than one place
When we would advise against a repair
In fairness, there are a few things a repair won’t fix:
- Problems we cannot see until an old finish comes off
- An acrylic bath that flexes badly underfoot
- Holes rusted through the metal
If in doubt, send pictures and we’ll say what we think.
Surfaces we repair
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
Bath re-enamelling in Queensferry without replacing anything
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. If you are dealing with a bath that stays dull however much you clean it and a peeling or bubbling previous coating, we can typically put it right, whatever the material.
All of our repairs are guaranteed for twelve months in Queensferry and everywhere else. If something goes wrong with the work, we come back.
- Area
- Queensferry (CH5)
- Region
- Flintshire
- Guarantee
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Why repair rather than replace?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and usually a day, and the bath is usable the day after. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Why choose Surface Doctor in Queensferry
- One-year guarantee on every repair
- Free fixed quotes from pictures
- Nothing taken out or refitted
- CHAS, Constructionline and SafeContractor accredited
See our prices page and bath cost comparison.
Queensferry and the surrounding area
Queensferry (also: Y Fferi Isaf) is about 2 miles east of Connah's Quay, in Flintshire. From the centre of Queensferry to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover 139 places across Flintshire, from the larger towns to small villages. Our jobs stretch from Queensferry to Liverpool (14 miles away).
Our visits in CH5 are booked in the same way as anywhere else. You’ll find streets such as Station Road, Glynne Street and Chester Road East, all of which we cover. You will find Queensferry on the A550 and B5441, so it’s easy for us to reach. Other places close to Queensferry include Pentre (1 mile south-east), Shotton (1 mile west), Higher Shotton (1 mile west), Garden City (1 mile north-east) and Wepre (1 mile north-west). We also work in nearby towns such as Buckley (3 miles south-west), Bwcle (3 miles south-west), Flint (5 miles north-west), Saltney (5 miles south-east), Mold (6 miles south-west) and Holywell (10 miles north-west).
Local landmarks in Queensferry
Locally, our jobs take us to homes close to Wepre Park, Mechanics Arms and St Ethelwold's Church and the streets around them. You’ll also find Queens Ferry C.P. School (under half a mile west), Gladstone's Library (1.4 miles south) and John Summers High School (under half a mile west). The nearest railway station is Shotton station, about 0.8 miles north-west. A little further out are Buckley Library (3.5 miles south-west) and West Saltney (1.3 miles south-east). Not far away are Prenbrigog and Deeside Nature Reserve.
Places near Queensferry
Other services in Queensferry
Work for landlords and builders
Landlords, letting agents and housing providers in Queensferry use us as well as householders. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
Common questions in Queensferry
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
Is there a guarantee?
All our work carries our one-year guarantee. We’ll explain what it covers when we quote.
Will the price change on the day?
We will show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
Does re-enamelling smell?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
Will the new finish last?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Do you cover Queensferry?
Yes. We cover the entire UK and travel to Queensferry and the rest of Flintshire. Send photos and we’ll quote, or call 0345 017 0787.
Can you quote from pictures?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
What happens on the day
We work cleanly and quietly, so you can carry on at home. We protect the area first, then the job itself takes the best part of a day. Before we leave, we explain the curing time and the aftercare.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can normally be used the next day.
Getting ready for the visit
- Point us to the nearest place to park
- Tell us about any previous repairs or coatings
- Plan for the room to be out of bounds to pets and children
Getting a price
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Read more
Signs you need bath re-enamelling in Queensferry
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Signs it’s time to call us include:
- Stains that won’t shift
- Thin, worn enamel in places
- An original cast iron bath that needs restoring
- An outdated colour you’d like to change
Comparing quotes
- Whether the colour is mixed to match
- Whether cleaning and preparation are in the price
- What protection goes down before work starts
- What happens if they find more damage
Prices and what affects them
Resurfacing from £350. Quotes are free and the price is fixed. What we look at:
- What kind of damage it is
- How much damage there is
- Doing more than one item at once
- Whether old repairs or coatings need taking off
The price reflects the work involved, not your postcode. You’ll see the full price before booking, with nothing added on the day.
How to get a fixed quote
When you take your pictures, these tips help us give you a firm price:
- One sharp close-up of the damage
- Where you are, by postcode
- A photo taken from further back
- A coin beside the damage so we can judge size
There is no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Different materials, different repairs
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we pay close attention there.
About our accreditations · Every repair comes with a one-year guarantee.
