Lancashire · England
Bath re-enamelling & resurfacing in Roach Bridge, Lancashire
We travel to Roach Bridge for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- A dull, rough surface that won’t come clean
Covering Roach Bridge
Roach Bridge is about 3 miles north-east of Bamber Bridge, in Lancashire. Whether you are in the middle of Roach Bridge or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. Our repair technicians cover all 482 towns and villages across Lancashire, from the larger towns to small villages. You can also see our page for Manchester, about 25 miles away.
Here we cover the PR5 postcode area. If you’re just outside Roach Bridge, we cover Coupe Green (1 mile south-west), Gregson Lane (1 mile south), Higher Walton (1 mile south-west), Jack Green (2 miles south) and Walton-le-Dale (2 miles west). Larger places within reach include Preston (4 miles west), Burnley (15 miles east), Chorley (7 miles south), Bamber Bridge (3 miles south-west), Accrington (10 miles east) and Leyland (5 miles south-west).
Landmarks near Roach Bridge
Typical jobs here are in homes near Walton-le-Dale High School, The Oak pub and Hoghton Tower park and the streets around them. The closest station to Roach Bridge is Bamber Bridge station, roughly 2.7 miles south-west of the centre. Well-known places in the area include St George's Shopping Centre (3.7 miles west) and South Ribble Museum (0.8 miles south-west). Open spaces near Roach Bridge include Brockholes.
Bath re-enamelling in Roach Bridge without replacing anything
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Whether it’s a coating lifting around the plughole and a coloured bath you want in white, we can help, whatever the material.
Every repair is covered by our one-year guarantee, wherever you are in Lancashire.
- Area
- Roach Bridge (PR5)
- Area hub
- Lancashire
- Warranty
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Landlords, agents and businesses in Roach Bridge
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access.
DIY kit or professional repair?
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Questions from Roach Bridge
Do you work in Roach Bridge?
Yes, we do. Technicians travel to Roach Bridge from across the region, and the price is the same as everywhere else.
Will there be fumes?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
How soon can you come?
It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Is there a guarantee?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Can a failed resurfacing be redone?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Will the bath be moved?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
Why repair rather than replace?
A replacement often means several trades over several days. Resurfacing takes one technician and typically a day, and the bath is usable the day after. Resurfacing from £350, with every job priced individually. A repair is priced on what needs doing, not where you live. The full price is agreed before you book, with no extras added later.
Why us?
- One price list for the whole UK
- We leave the room as we found it
- No need to remove anything
- One-year guarantee on every repair
Read our pricing or resurfacing vs replacement cost guide.
How it works
You don’t need to empty the room beforehand. We bring everything we need with us, lay protective sheets and get going once we’ve agreed what we are doing. Most jobs take most of the day, and you can get on with other things while we’re there.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the following day.
Before we arrive
- Mention any earlier repairs or resurfacing
- Ensure the area is dry
- Move bottles, mats and clutter away from the area
How to get a price
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed quote. There is no charge for the quote and you are under no obligation.
Read more
Do you need bath re-enamelling in Roach Bridge?
Older baths frequently have several problems at once: dull areas, chips, rust and staining. Resurfacing sorts them out together.
These are the problems we are asked about most:
- An old resurfacing that’s failing
- A roll-top that’s seen better days
- Staining under the taps and around the waste
- A dull, rough surface that won’t come clean
Questions to ask before booking
- What aftercare is recommended
- Whether they match the colour on site
- Whether there are any call-out or travel charges
- Whether cleaning and preparation are in the price
Nearby places to Roach Bridge
Also in Roach Bridge
Keeping it looking good
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Keep suction mats out of the bath
- Don’t let dyes or oils sit on the finish
- Respect the curing time we give you
- A dripping tap should be fixed promptly
Wipe the bath dry after use where you can, especially in hard water areas, and rinse away any product left on the surface.
Do not try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
Materials and what they mean for the repair
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Prices and what affects them
Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:
- What the surface is made of
- How many items we do on one visit
- How hard the colour is to match
- Access to the area
There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your photos
Good photos mean an accurate price. Here’s what we find most useful:
- Good light, ideally daylight, without flash glare
- The material, if you know it
- Any earlier repairs or coatings
- A close-up of the damage, in focus
The quickest way to a price is to send a couple of pictures using our quote form or call us. We will tell you honestly if a repair is the right fix.
About our accreditations · Every repair comes with a one-year guarantee.
