Pembrokeshire · Wales
Bath Re-enamelling for Hill Mountain homes
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Hill Mountain. Free, fixed quotes from your pictures.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- A coating lifting around the plughole
The process
The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the work takes a full day. Before we leave, we explain how soon it can be used and how to look after it.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can usually be used the day after.
How to prepare
- Tell us if there are stairs or a lift
- Move bottles, mats and clutter away from the area
- Tell us about any previous repairs or coatings
Ask for a price
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Advice
Bath re-enamelling in Hill Mountain without replacing anything
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we do not cut corners on it. Common call-outs are for a coloured bath you want in white and thin, worn enamel in places, on acrylic baths, basins & shower trays and pressed steel baths.
A one-year guarantee comes as standard, so you are covered after the visit.
- Location
- Hill Mountain (SA62, SA73)
- Region
- Pembrokeshire
- Guarantee
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Covering Hill Mountain
Hill Mountain is about 5 miles east of Milford Haven, in Pembrokeshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. We work in 223 places in Pembrokeshire.
All of SA62 and SA73 is covered. Local streets include Ashdale Lane, Elidyr Park and Cleddau Close, and we cover them all. If you’re just outside Hill Mountain, we cover Newton Mountain (1 mile south-east), Foxhall (1 mile east), Port Lion (1 mile east), Sardis (1 mile west) and Houghton (1 mile south). We also work in nearby towns such as Haverfordwest (5 miles north-west), Milford Haven (5 miles west), Pembroke (4 miles south), Pembroke Dock (3 miles south), The Marsh (5 miles north) and Dinbych-y-Pysgod (11 miles south-east).
Around Hill Mountain
Typical jobs here are in homes near Sardis English Baptist Church, Cleddau Reach VC School and The Cottage Inn, among other places. The closest station to Hill Mountain is Pembroke Dock station, about 3.1 miles south of the centre. A little further out are South Pembrokeshire Hospital (3.3 miles south) and Rosemarket Rath (1.7 miles west). Not far away are Pembroke River lower and East Moor.
Signs you need bath re-enamelling in Hill Mountain
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
Keep an eye out for any of the following:
- Thin, worn enamel in places
- Lots of chips and rust spots
- Staining under the taps and around the waste
- Enamel that is lost its shine and feels rough
Before booking anyone
- The length of the guarantee and what it covers
- Whether the colour is mixed to match
- Who turns up on the day
- How your room will be protected
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot.
Repair or replace in Hill Mountain?
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the entire room anyway. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why book with us
- Nothing taken out or refitted
- CHAS and Constructionline accredited
- We’ll tell you if it’s not worth repairing
- No extra charge for your area
See our pricing or bath cost comparison.
Keeping it looking good
Nothing complicated is needed:
- Do not use the bath until it has fully cured
- Don’t leave a chip unrepaired
- A dripping tap should be fixed promptly
- Store bottles off the bath
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
Can I fix it myself?
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
FAQs for Hill Mountain
Does the bath have to be removed?
No. We resurface it in place, so nothing else is disturbed.
Can you repair something that is been repaired before?
Generally, yes. Let us know what was used before and we will plan for it.
Do you cover the whole of Pembrokeshire?
Everywhere in the UK, Hill Mountain included. Travel is included in the price.
Can pets and children be at home?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
Do you come to Hill Mountain?
Yes. We cover the entire UK and travel to Hill Mountain and the rest of Pembrokeshire. Send photos and we will quote, or call 0345 017 0787.
Is my repair covered?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Are there extra charges for Hill Mountain?
Travel is included in the price, with the same prices everywhere we work.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
For landlords and businesses
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Landlords, letting agents and housing providers in Hill Mountain use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Places near Hill Mountain
What else we do in Hill Mountain
What we can’t put right
In fairness, some problems need a different fix:
- Anything hidden under an old coating, until we remove it
- An acrylic bath that flexes badly underfoot
- A bath split right through the body
Send us photos and we will tell you honestly.
Materials we repair
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
About our accreditations · Every repair comes with a one-year guarantee.
