Pembrokeshire · Wales
Bath Re-enamelling in Newton Mountain
Full bath re-enamelling and resurfacing at your home in Newton Mountain, with a one-year guarantee on every repair.
- Resurfacing from £350
- Wear marks under the taps
- A roll-top that’s seen better days
Bath re-enamelling in Newton Mountain without replacing anything
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Our technicians work on acrylic baths, Victorian roll-tops and basins & shower trays, and people most often call us about brown or grey marks that don’t clean off and enamel that’s lost its shine and feels rough.
Every job is backed for twelve months in Newton Mountain and everywhere else. If something goes wrong with the work, we come back.
- Where
- Newton Mountain (SA73)
- Area hub
- Pembrokeshire
- Cover
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Covering Newton Mountain
Newton Mountain is about 5 miles east of Milford Haven, in Pembrokeshire. We visit homes and businesses in Newton Mountain, so you don’t need to take anything anywhere. Newton Mountain is one of 223 towns and villages in Pembrokeshire where we work.
Our visits in SA73 are booked in the same way as anywhere else. We regularly work on streets such as Hill Crescent and New Wells Road and the roads around them. Nearby, we also work in Hill Mountain (1 mile north-west), Foxhall (1 mile north-east), Houghton (1 mile south), Port Lion (1 mile north-east) and Sardis (1 mile north-west). Larger places within reach include Haverfordwest (5 miles north-west), Milford Haven (5 miles west), Pembroke (4 miles south), Pembroke Dock (3 miles south), The Marsh (5 miles north) and Dinbych-y-Pysgod (10 miles south-east).
Landmarks near Newton Mountain
We visit homes around Sardis English Baptist Church and the streets around them. The nearest railway station is Pembroke Dock station, roughly 2.9 miles south of the centre. Nearby you will also find Pembroke Dock: Llanion (2.8 miles south) and Benton Castle (1.6 miles south-east). Open spaces near Newton Mountain include Pembroke River lower and Lawrenny Hill.
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Stick to gentle, non-abrasive cleaners
- Get any chip repaired quickly
- A dripping tap should be fixed promptly
- Rinse off hair dye, oils and bath bombs straight away
Treat the new finish gently at first: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
When we’d advise against a repair
Some jobs are not right for a repair, including:
- Acrylic that moves when you stand in it
- Anything hidden under an old coating, until we remove it
- A bath that’s rusted through
If in doubt, send photos and we will say what we think before you book.
Materials we work on in Newton Mountain
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
What bath re-enamelling costs
Prices start from £350. There’s no area surcharge for Newton Mountain. The price reflects:
- The material
- The colour and finish to match
- How much damage there is
- Whether it’s a chip, crack, burn or wear
We do not add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your pictures
Photographing the damage takes a minute, and it saves a visit. Please include:
- One picture of the entire bath
- A clear, close picture of the problem area
- Something in shot to show the size
- Any details about the material
To get a price, send two or three pictures through our quote form or call us. We’ll say immediately if a repair is the right fix.
Landlord and trade work in Newton Mountain
We work for landlords, letting agents and housing providers in Newton Mountain as well as homeowners. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
We are used to working with agents and managing companies. Send the address, photos and access details and we’ll arrange it.
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
Repair or replace in Newton Mountain?
If the bath is sound, re-enamelling is normally much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
Why book with us
- Honest advice, even when it means no job
- Colour mixed on the day to match
- Free fixed quotes from pictures
- We come to you, anywhere in the UK
Read our full price list or guide to resurfacing and replacement costs.
Nearby places to Newton Mountain
More services for Newton Mountain
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Questions from Newton Mountain
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children.
Is there a smell?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Do you work in Newton Mountain?
Yes. We work across the UK and travel to Newton Mountain and the rest of Pembrokeshire. Send us pictures for a fixed quote, or call 0345 017 0787.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
What we do, step by step
Arrival times are agreed in advance. Once we are there, the work takes most of the day. The room is left tidy.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the following day, the bath is ready.
Before we arrive
- Tell us if there are stairs or a lift
- Have a window or extractor fan available
- Tell us about parking, stairs or access
Getting a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote the same day in most cases.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
