East Riding of Yorkshire · England
Bath re-enamelling & resurfacing in Lund, East Riding of Yorkshire
Bath re-enamelling in and around Lund: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A coating lifting around the plughole
- A period or roll-top bath worth keeping
When to call us in Lund
Older baths often have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
The things clients typically mention when they call include:
- Brown or grey marks that don’t clean off
- Enamel that’s lost its shine and feels rough
- An old resurfacing that’s failing
- Lots of chips and rust spots
Before you book anyone
- How long it needs to cure
- How the colour is matched
- What preparation is included
- Who will actually do the work
About our bath re-enamelling in Lund
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Whether it’s a roll-top that’s seen better days and thin, worn enamel in places, we can usually put it right, whatever the material.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Area
- Lund (YO25)
- Region
- East Riding of Yorkshire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- Holes rusted through the metal
- Leaking taps or wastes (a plumber’s job)
- Anything hidden under an old coating, until we remove it
Send us pictures and we’ll tell you honestly.
Materials we repair
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
For landlords and businesses
If you manage property in Lund, we will quote for several properties at once. Send pictures for each one and we will price them together.
Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
What we do, step by step
Once we are through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes the best part of a day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the following day.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Open a window if you can
- Let the surface dry out before the visit
Getting a price
To get a price, send two or three pictures through our quote form or ring us. We’ll say immediately whether it can be repaired.
Related advice
Common questions in Lund
What happens if you find more damage?
The price is fixed for what the pictures show. If there is more, we will tell you before starting.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Do you charge for travel?
There’s no separate call-out charge. Your fixed price includes everything.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.
Does the bath have to be removed?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.
How soon can you come?
We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted before the end of a tenancy.
Towns and villages near Lund
What else we do in Lund
Keeping it looking good
Nothing complicated is needed, just a few sensible habits:
- Have chips seen to early
- Wash away dyes and oils after use
- Respect the curing time we give you
- A dripping tap should be fixed promptly
Dry the bath after use if possible, particularly with hard water, and rinse away any product left on the surface.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Where we work around Lund
Lund is about 7 miles north-west of Beverley, in East Riding of Yorkshire. Jobs in Lund are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. Lund is one of 299 places in East Riding of Yorkshire we cover. We work right across the region, from Lund to Leeds (42 miles away).
All of YO25 is covered. That includes homes on The Green, Cherry Garth and Eastgate and the roads around them. Nearby, we also work in Holme on the Wolds (1 mile south), Middleton-on-the-Wolds (2 miles north-west), Bainton (3 miles north), North Dalton (3 miles north-west) and Kirkburn (4 miles north). We also work in nearby towns such as Beverley (7 miles south-east), Driffield (7 miles north-east), Pocklington (10 miles west), Hessle (14 miles south), Cottingham (10 miles south-east) and Hornsea (14 miles east).
Near you in Lund
Typical jobs here are in homes near Church of All Saints, among other places. Lund’s nearest station is Hutton Cranswick station, about 4.4 miles north-east. Well-known places in the area include Southburn Archaeological Museum (3.1 miles north-east).
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Prices and what affects them
Prices start from £350. We give every job a fixed price from pictures. These are the things that affect it:
- Previous DIY repairs that have to come out
- Where the damage is and how we get to it
- The material
- How many items we do on one visit
A repair is priced on what needs doing, not where you live. The full price is agreed before you book, with nothing added on the day.
How to get a fixed price
When you take your photos, these tips help us give you a firm price:
- The material, if you know it
- Whether it’s been repaired or coated before
- One sharp close-up of the damage
- Good light, ideally daylight, without flash glare
Send us pictures of the damage and one of the entire item, with your YO25 postcode, and we’ll reply with a fixed price.
About our accreditations · Every repair comes with a one-year guarantee.
