East Riding of Yorkshire · England
Bath re-enamelling & resurfacing in Kirkburn, East Riding of Yorkshire
Fixed-price bath re-enamelling in Kirkburn and the surrounding area, usually in one visit and guaranteed for a year.
- Resurfacing from £350
- Wear marks under the taps
- An original cast iron bath that needs restoring
When to call us in Kirkburn
Frequently the bath has just had decades of use. The body of the bath is usually perfectly sound.
The most common problems we’re called about are:
- A coating lifting around the plughole
- A dull, rough surface that won’t come clean
- A bath in a colour that no longer suits
- Thin, worn enamel in places
What to look for in a quote
- Whether cleaning and preparation are in the price
- How long it needs to cure
- What protection goes down before work starts
- Who will actually do the work
How we handle bath re-enamelling in Kirkburn
We re-enamel a lot of period and roll-top baths, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. We regularly repair pressed steel baths, cast iron baths and basins & shower trays, and common reasons people get in touch are an original cast iron bath that needs restoring and chips and rust in more than one place.
You are covered for a year from the day of the repair. If anything is not right, ring us and we will sort it.
- Where
- Kirkburn (YO25)
- County
- East Riding of Yorkshire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Towns and villages near Kirkburn
Also in Kirkburn
Repairing versus replacing in Kirkburn
If the bath is sound, re-enamelling is usually much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
What you get with us
- We’ll tell you if it’s not worth repairing
- We leave the room as we found it
- Everything repaired in place
- Repair technicians who travel to you, UK-wide
See our pricing or guide to resurfacing and replacement costs.
What affects the price in Kirkburn
Prices start from £350. We price every job individually. What matters most is:
- The colour and finish to match
- The size and number of damaged areas
- Where the damage is and how we get to it
- What the surface is made of
The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your photos, so there are no surprises on the day.
How to get a fixed quote
Most quotes are done from pictures alone. To help us price it:
- One sharp close-up of the damage
- Details of any past repairs
- Your postcode, so we can check dates
- Daylight if possible, and no flash reflection
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. You will get a fixed price, not an estimate.
Landlords, agents and businesses in Kirkburn
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
What a repair cannot fix
Honesty matters more than a booking, so here’s what a repair will not do:
- Plumbing leaks, which need a plumber
- Acrylic that moves when you stand in it
- A bath that’s rusted through
Not sure? Send pictures and we’ll give you a straight answer.
Materials we repair
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
DIY repairs versus a professional job
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
Your questions about bath re-enamelling in Kirkburn
Do you need to take the bath out?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
Can a failed resurfacing be redone?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Is there a guarantee?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
How long does re-enamelling last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Kirkburn and the surrounding area
Kirkburn is about 3 miles south-west of Driffield, in East Riding of Yorkshire. From the centre of Kirkburn to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Kirkburn is one of 299 towns and villages in East Riding of Yorkshire where we work. Our nearest city page is Leeds, about 44 miles away.
Every address in YO25 is covered. Jobs here include addresses on Main Street and Eastlands Road. If you are just outside Kirkburn, we cover Tibthorpe (1 mile west), Bainton (2 miles south-west), North Dalton (3 miles south-west), Middleton-on-the-Wolds (4 miles south-west) and Lund (4 miles south). Larger places within reach include Beverley (10 miles south), Bridlington (15 miles north-east), Driffield (3 miles north-east), Pocklington (12 miles west), Cottingham (14 miles south) and Hornsea (15 miles east).
Near you in Kirkburn
Typical jobs here are in homes near Church of St Mary, among other places. The nearest railway station is Driffield station, roughly 3.2 miles north-east of the centre. Nearby you’ll also find Southburn Archaeological Museum (3.8 miles south-east) and Emswell with Kellythorpe (2 miles north-east).
How it works
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take the best part of a day. We clean up when we’re done and tell you when it’s ready to use.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Tell us about any previous repairs or coatings
- Mention any parking restrictions or tricky access
Ask for a price
If you’re in Kirkburn and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Read more
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
About our accreditations · Every repair comes with a one-year guarantee.
