Redcar and Cleveland · England
Bath re-enamelling & resurfacing in Hutton Village, Redcar and Cleveland
Our repair technicians come to Hutton Village for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- Worn patches where water runs and sits
- Lots of chips and rust spots
Your questions about bath re-enamelling in Hutton Village
Can you repair several things at once?
Yes. Doing several items on one visit normally costs less than separate visits. Include photos of each item.
Can you price it without visiting?
Nearly always. We only ask to see it in person if the pictures cannot show what we need.
What happens if you find more damage?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Can you re-enamel a roll-top bath?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
Is there a smell?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
What happens once I’ve sent photos?
We check the damage, the material and your postcode, then reply with a quote with dates.
When can you do it?
We’ll give you dates with your quote. Tell us if you need it done quickly.
How we handle bath re-enamelling in Hutton Village
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Doing them in place keeps an original feature. We work on basins & shower trays, pressed steel baths and acrylic baths, and the jobs we see most are a peeling or bubbling previous coating and stains that won’t shift.
You are covered for a year from the day of the repair. If anything is not right, ring us and we will come back.
- Area
- Hutton Village (TS14)
- County
- Redcar and Cleveland
- Guarantee
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Work for landlords and builders
If you manage property in Hutton Village, we can repair and quote for several addresses together. Just send pictures for each address and we’ll price them together.
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
Places near Hutton Village
What else we do in Hutton Village
DIY kit or professional repair?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Where we work around Hutton Village
Hutton Village is about 1 mile south-west of Guisborough, in Redcar and Cleveland. Book a date that suits you, and we will give you an arrival time in advance, so you are not left waiting in all day. We work in all 48 towns and villages in Redcar and Cleveland. Our nearest city page is Newcastle upon Tyne, about 40 miles away.
We cover every part of the TS14 postcode area. If you are just outside Hutton Village, we cover Guisborough (1 mile north-east), Dunsdale (3 miles north), Wilton (4 miles north), New Marske (4 miles north) and Yearby (4 miles north). Within a short drive, we also cover Redcar (6 miles north), Eston (4 miles north-west), Marske-by-the-Sea (6 miles north-east), Grangetown (5 miles north-west), Skelton-in-Cleveland (5 miles north-east) and Skelton (5 miles north-east).
Local landmarks in Hutton Village
Typical jobs here are in homes near Prior Pursglove College and Highcliffe Primary School, among other places. Hutton Village’s nearest station is Great Ayton station, about 2.5 miles south-west. Nearby you will also find Redcar Primary Care Hospital (5.8 miles north) and Guisborough Museum (1.5 miles north-east). For a walk, there’s Roseberry Topping.
Repair or replace in Hutton Village?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your photos, so you know the cost before you book.
Why book with us
- We will tell you if it’s not worth repairing
- Typically one visit, start to finish
- Colours mixed by hand to suit your surface
- A fixed quote before you book
Take a look at our full price list and bath cost comparison.
What affects the price in Hutton Village
Resurfacing from £350. We give every job a fixed price from photos. This is what makes a difference:
- The type of damage
- How many items we do on one visit
- The size and number of damaged areas
- What the surface is made of
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
How to get a fixed price
Two or three clear pictures are generally enough. Try to include:
- A coin beside the damage so we can judge size
- One picture of the entire bath
- A clear, close picture of the problem area
- Any earlier repairs or coatings
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job without visiting.
Do you need bath re-enamelling in Hutton Village?
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
The things customers typically mention when they call include:
- Stains that will not shift
- An old resurfacing that’s failing
- A bath that stays dull however much you clean it
- A period or roll-top bath worth keeping
Before booking anyone
- What the guarantee covers, and for how long
- Whether the price covers travel
- How changes to the job are handled
- Whether the price is fixed and includes VAT
The process
There is not much you need to do on the day. Show us the job, point us to the room, and we will take it from there. The job generally runs to the best part of a day.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can typically be used the following day.
Before we arrive
- Mention any parking restrictions or tricky access
- Have a window or extractor fan available
- Tell us about any previous repairs or coatings
Getting a price
Upload a picture of the damage and a wider shot of the entire item, with your TS14 postcode, and we will reply with a fixed quote.
Related advice
When we would advise against a repair
Before you book, it’s worth knowing the limits too:
- Plumbing leaks, which need a plumber
- A bath split right through the body
- An acrylic bath that flexes badly underfoot
Send us photos and we will tell you honestly before you book.
Materials we work on in Hutton Village
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
Looking after it afterwards
Aftercare is simple, and it makes a real difference:
- Respect the curing time we give you
- Do not leave a chip unrepaired
- Keep toiletries on a shelf rather than in the bath
- Clean with a soft cloth and mild detergent
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
About our accreditations · Every repair comes with a one-year guarantee.
