Redcar and Cleveland · England
Bath re-enamelling & resurfacing in Wilton, Redcar and Cleveland
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Wilton. Send pictures for a free, fixed quote.
- Resurfacing from £350
- Staining under the taps and around the waste
- An original cast iron bath that needs restoring
Repair or replace: which is better?
If the bath is sound, re-enamelling is normally much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Prices start from £350. A repair is priced on what needs doing, not your postcode. You will see the full price before booking.
Why us?
- CHAS, Constructionline and SafeContractor accredited
- Repair technicians who travel to you, UK-wide
- Colours mixed by hand to suit your surface
- Dust sheets down, tidy finish
Take a look at our full price list and guide to resurfacing and replacement costs.
How we handle bath re-enamelling in Wilton
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Nothing is disconnected or removed. Our repair technicians work on basins & shower trays, pressed steel baths and cast iron baths, and common reasons people get in touch are enamel that’s lost its shine and feels rough and staining under the taps and around the waste.
Peace of mind is built in: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Where
- Wilton (TS10)
- County
- Redcar and Cleveland
- Cover
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Places near Wilton
What else we do in Wilton
Signs you need bath re-enamelling in Wilton
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
Customers generally contact us about:
- Several chips and rust patches
- Worn patches where water runs and sits
- An original cast iron bath that needs restoring
- Stains that won’t shift
Comparing quotes
- Whether the price covers travel
- A fixed price, and whether VAT is included
- How to care for the finish
- How long the guarantee is and what it covers
Wilton: your questions answered
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
What do you need from me?
Use the quote form or ring 0345 017 0787.
Can I get a quote without a visit?
Nearly always. If pictures don’t show enough, we’ll ask for another angle.
Can you change the colour of my bath?
Yes, white is the usual choice. Mention the colour you want when you send photos.
Does the bath have to be removed?
Not at all. We work on the bath in place, with the room protected and ventilated.
It’s been repaired before. Can you still fix it?
Generally, yes. Let us know what was used before and we will plan for it.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders.
Is my repair covered?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
What bath re-enamelling costs
Prices start from £350. You won’t pay by the hour. The price is based on:
- The size and number of damaged areas
- Whether old repairs or coatings need taking off
- How hard the colour is to match
- The material
A repair typically costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
How to get a fixed price
A couple of clear pictures is all it takes. It helps if you send:
- One picture of the whole bath
- Daylight if possible, and no flash reflection
- Details of any past repairs
- Any details about the material
To get a price, send a couple of photos through our quote form or call us. We’ll tell you honestly if a repair is the right fix.
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
Aftercare tips
Most damage we see is avoidable. These habits help:
- Keep suction mats out of the bath
- Fix dripping taps quickly
- Leave the bath for the full curing time before using it
- Keep toiletries on a shelf rather than in the bath
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
Landlords, agents and businesses in Wilton
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
What happens on the day
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job generally takes most of the day. We tidy up before we leave and let you know when you can use it again.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Keep pets and children out of the room while we work
- Mention any parking restrictions or tricky access
- Have a window or extractor fan available
Getting a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Related advice
Our work in Wilton
Wilton is about 2 miles east of Eston, in Redcar and Cleveland. Wherever you are in the TS10 postcode area, we come to you. Wilton is one of 48 towns and villages in Redcar and Cleveland where we work. You can also see our page for Newcastle upon Tyne, about 36 miles away.
Our technicians cover all of TS10 and the streets around it. Neighbouring places we cover include Yearby (1 mile north-east), Dunsdale (1 mile south-east), Kirkleatham (2 miles north), New Marske (2 miles east) and Guisborough (3 miles south-east). Larger places within reach include Redcar (3 miles north-east), Skelton-in-Cleveland (4 miles east), Skelton (5 miles east), Brotton (6 miles east), South Bank (3 miles west) and Saltburn-by-the-Sea (5 miles east).
Local landmarks in Wilton
Typical jobs here are in homes near Church of St Cuthbert and Wilton Primary Academy and the streets around them. The closest station to Wilton is Longbeck station, roughly 3 miles north-east. Well-known places in the area include Redcar Primary Care Hospital (2.4 miles north-east) and Skelton Castle (4.2 miles east). Open spaces near Wilton include Coatham Marsh and Eston Nab.
About our accreditations · Every repair comes with a one-year guarantee.
