Redcar and Cleveland · England
Bath Re-enamelling in New Marske
Problem with your bath in New Marske? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Thin, worn enamel in places
- A roll-top that is seen better days
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
How we handle bath re-enamelling in New Marske
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Our technicians work on pressed steel baths, acrylic baths and cast iron baths, and people most frequently call us about a coating lifting around the plughole and an outdated colour you’d like to change.
You’re covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Where
- New Marske (TS11)
- Area hub
- Redcar and Cleveland
- Cover
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Our work in New Marske
New Marske is about 2 miles south-east of Redcar, in Redcar and Cleveland. Jobs in New Marske are booked in like any other job: a fixed price from your photos, then a visit to do the work. New Marske is one of 48 towns and villages in Redcar and Cleveland we cover. You can also see our page for Newcastle upon Tyne, about 37 miles away.
Here we cover the TS11 postcode area. Jobs here include addresses on Birkdale Road, Kilbridge Close and St George's Crescent and the roads around them. Nearby, we also work in Marske-by-the-Sea (1 mile north-east), Yearby (1 mile west), Dunsdale (1 mile south-west), Kirkleatham (2 miles north-west) and Wilton (2 miles west). Larger places within reach include Eston (5 miles west), Grangetown (4 miles west), Skelton (3 miles south-east), Brotton (4 miles east), South Bank (5 miles west) and Saltburn-by-the-Sea (3 miles east).
Landmarks near New Marske
Around New Marske, we work in homes near Outwood Academy Bydales, New Marske Primary School and Saint Thomas, among other places. The closest station to New Marske is Longbeck station, about 0.9 miles north-east. Further afield, we also cover the area around Winkies Castle Folk Museum (1.3 miles north-east) and Skelton Castle (2.1 miles south-east). Green spaces nearby include Coatham Marsh and Eston Nab.
Prices and what affects them
Resurfacing from £350. Each job gets its own fixed quote. This is what makes a difference:
- What the surface is made of
- How much damage there is
- Whether old repairs or coatings need taking off
- Where the damage is and how we get to it
Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
How to get a fixed price
We price nearly every job from photos. This is what to send:
- Any earlier repairs or coatings
- Where you are, by postcode
- A wider photo showing the whole bath
- Natural light rather than flash
To get a price, send two or three photos using our quote form or call us. We’ll say right away if a repair is the right fix.
Questions from New Marske
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do you cover New Marske?
Yes, we do. Repair technicians travel to New Marske from across the region, with no extra charge for travel.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
What information do you need?
Use the quote form or ring 0345 017 0787, and we’ll take it from there.
Do you resurface freestanding baths?
Yes, often. We resurface the inside, and the outside can be refinished too.
Can you make a coloured bath white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
What happens once I’ve sent photos?
We come back with a fixed quote, plus dates. You are under no obligation.
Can I get a quote without a visit?
Generally, yes. A close-up and a wider photo are enough to give a fixed price.
Should you replace it?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Our bath re-enamelling starts from £350. A repair is priced on what needs doing, not where you live. You will see the full price before you book, with no extras added later.
Why us?
- Colour mixed on the day to match
- We’ll tell you if it’s not worth repairing
- Accredited with CHAS, Constructionline and SafeContractor
- One price list for the entire UK
See our pricing and resurfacing vs replacement cost guide.
Common problems we fix in New Marske
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
Send us a picture if you notice any of these:
- An old resurfacing that’s failing
- Staining under the taps and around the waste
- A dull, rough surface that will not come clean
- Lots of chips and rust spots
Questions to ask before you book
- The length of the guarantee and what it covers
- Whether they match the colour on site
- How to care for the finish
- How the room is protected while they work
Work for landlords and builders
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
How it works
We turn up when we said we would, introduces themselves and checks the damage against your photos first. Dust sheets and masking tape go down before we open a single tin. Most visits take most of the day, and the room is left clean and tidy.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Let us know which floor the room is on
- Let us know if it has been repaired before
- Mention any parking restrictions or tricky access
Get a quote
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and we’ll reply with a fixed quote. Quotes are free and you’re under no obligation.
Related advice
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- Anything hidden under an old coating, until we remove it
- A bath that is rusted through
- Leaks from fittings rather than the bath
Not sure? Send pictures and we’ll give you a straight answer.
Surfaces we repair
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Cast iron baths
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we check it carefully.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
Towns and villages near New Marske
What else we do in New Marske
About our accreditations · Every repair comes with a one-year guarantee.
