Lancashire · England
Bath Re-enamelling for Little Singleton homes
Bath re-enamelling in and around Little Singleton: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A coating lifting around the plughole
- Chips and rust in more than one place
For landlords and businesses
For developers and builders, we fix damage before handover. Several plots can be done in one visit to keep costs down.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
How we handle bath re-enamelling in Little Singleton
Resurfacing renews the entire surface of the bath without taking anything out. It’s the answer when the whole bath is tired rather than one spot. Whether it’s an outdated colour you’d like to change and staining under the taps and around the waste, we can help, on cast iron baths, basins & shower trays and Victorian roll-tops alike.
Every job is backed for twelve months. If something goes wrong with the work, we come back.
- Area
- Little Singleton (FY6)
- County
- Lancashire
- Cover
- One year on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Why repair rather than replace?
If the bath is sound, re-enamelling is usually much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Resurfacing from £350, with every job priced individually. The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your pictures, so you know the cost before you book.
Why us?
- A year’s guarantee on all work
- Nothing taken out or refitted
- Honest advice, even when it means no job
- A fixed quote before booking
Take a look at our prices page or resurfacing vs replacement cost guide.
How to care for the repair
Most damage we see is avoidable. These habits help:
- Don’t use the bath until it has fully cured
- A quick wipe after use keeps limescale away
- Rinse off hair dye, oils and bath bombs right away
- A dripping tap should be fixed promptly
Use mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Little Singleton questions
Does the bath have to be removed?
Not at all. We work on the bath in place, with the room masked and ventilated.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we’ll tell you.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Is there a smell?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Can tenants book a repair?
Of course. Check with your landlord; we can send the quote to them too.
Do the materials smell?
Expect a mild smell while we’re working that clears as it cures.
Is there a call-out fee?
There’s no separate call-out charge. The fixed quote covers the visit and the work.
How long does re-enamelling last?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
How the visit works
We work cleanly and quietly. We protect the area first, then the work takes a full day. Before we leave, we explain the curing time and the aftercare.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the following day, the bath is ready.
Preparing for the visit
- Let us know about parking or access
- Make sure the area is dry
- Let us know if it has been repaired before
Ask for a price
For a price in Little Singleton, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Related advice
What a repair can’t fix
Before you book, it’s worth knowing the limits:
- A bath that is rusted through
- Leaking taps or wastes (a plumber’s job)
- Anything hidden under an old coating, until we remove it
If in doubt, send pictures and we will say what we think before you book.
Surfaces we repair
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Repairs by material
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
When to call us in Little Singleton
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Most people get in touch when they notice one of these:
- Enamel that is lost its shine and feels rough
- Brown or grey marks that don’t clean off
- Lots of chips and rust spots
- Worn patches where water runs and sits
Before you book anyone
- What preparation is included
- How the colour is matched
- How long the guarantee is and what it covers
- When it can be used again
Also near Little Singleton
Also in Little Singleton
Covering Little Singleton
Little Singleton is about 2 miles east of Poulton-le-Fylde, in Lancashire. Clients in Little Singleton get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. We work in 482 places across Lancashire, from the larger towns to small villages. You can also see our page for Liverpool, about 31 miles away.
Postcode districts we cover here: FY6. Whether you live on Honeypot Lane, Occupation Lane and Mains Lane or a nearby road, a technician can come to you. We also travel to Singleton (1 mile south-east), Poulton-le-Fylde (2 miles west), Whin Lane End (2 miles north-east), Hambleton (2 miles north) and Larbreck (2 miles east). Further out, we also cover Preston (12 miles south-east), Lancaster (15 miles north-east), Lytham St Anne's (7 miles south), Bamber Bridge (14 miles south-east), Leyland (15 miles south-east) and Fulwood (10 miles south-east).
Near you in Little Singleton
In Little Singleton, that means homes near Singleton Church of England Voluntary Aided Primary School, Hodgson Academy and St Anne's Church. Little Singleton’s nearest station is Poulton-Le-Fylde station, about 1.8 miles west of the centre. Other landmarks nearby include Teanlowe Centre (1.9 miles west) and Bispham Hospital (3.1 miles west). Open spaces near Little Singleton include Marton Mere.
About our accreditations · Every repair comes with a one-year guarantee.
