Wiltshire · England
Bath Re-enamelling for Littlecott homes
Our repair technicians come to Littlecott for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Chips and rust in more than one place
- A period or roll-top bath worth keeping
Littlecott questions
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
What happens once I’ve sent pictures?
We review the photos and send a fixed quote with dates.
Do you work in Littlecott?
We do. We send a technician to Littlecott for every job, with no extra charge for travel.
Will there be fumes?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Can you price it without visiting?
Nearly always. If photos do not show enough, we’ll ask for another angle.
Can you do more than one item on the same visit?
Yes, and it’s frequently cheaper. Send pictures of everything together and we’ll quote them together.
Will the price change on the day?
Your quote covers the damage in the photos. If there’s more, we will tell you before starting.
Do you do work for letting agents?
Yes, frequently. We can quote for several properties together and work between tenancies.
About our bath re-enamelling in Littlecott
Most baths are re-enamelled in a day, and you can use the bath the day after. Nothing is disconnected or removed. We are often asked to fix wear marks under the taps and staining under the taps and around the waste, on Victorian roll-tops, pressed steel baths and basins & shower trays.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Area
- Littlecott (SN9)
- Region
- Wiltshire
- Warranty
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Towns and villages near Littlecott
What else we do in Littlecott
What affects the price in Littlecott
Resurfacing from £350. There’s no area surcharge for Littlecott. The price reflects:
- Any earlier repairs that need removing first
- Access to the area
- How many areas need work
- The material
A repair generally costs much less than people expect, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
Quotes from your photos
Almost every job we do is priced from pictures. This is what to send:
- Something in shot to show the size
- Where you are, by postcode
- What it’s made of, if you know
- Daylight if possible, and no flash reflection
For a price in Littlecott, photos are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
Our work in Littlecott
Littlecott is about 7 miles north of Amesbury, in Wiltshire. We agree a date that works for you, and we will give you an arrival time in advance, so there is no waiting around. We work in all 425 towns and villages across Wiltshire, from the larger towns to small villages. Our jobs stretch from Littlecott to London (75 miles away).
All of SN9 is within our area, from the main roads to the quietest streets. You’ll find streets such as Paddock Close, Water Lane and Grants Road. Other places close to Littlecott include Coombe (1 mile south-east), Fittleton (1 mile south), Haxton (1 mile south), Netheravon (2 miles south) and Figheldean (3 miles south). Within a short drive, we also cover Salisbury (13 miles south), Calne (15 miles north-west), Devizes (10 miles north-west), Amesbury (7 miles south), Marlborough (11 miles north) and Bugmore (14 miles south).
Landmarks near Littlecott
Locally, our jobs take us to homes close to Church of All Saints And St Margaret and Red Lion Freehouse pub.
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Never use suction bath mats
- Rinse off hair dye, oils and bath bombs straight away
- Respect the curing time we give you
- A quick wipe after use keeps limescale away
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Landlords, agents and businesses in Littlecott
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
When to call us in Littlecott
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Clients usually contact us about:
- Several chips and rust patches
- Staining under the taps and around the waste
- Thin, worn enamel in places
- A coloured bath you want in white
Questions to ask before you book
- How changes to the job are handled
- A fixed quote, and whether VAT is included
- Who turns up on the day
- Whether they match the colour on site
What happens on the day
We work cleanly and quietly, so you can carry on at home. We protect the area first, then the job itself takes a full day. At the end we talk you through the curing time and the aftercare.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the next day.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Have somewhere for us to park nearby if possible
- Mention any earlier repairs or resurfacing
How to get a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Related advice
What we cannot put right
Before you book, it’s worth knowing the limits:
- A bath split right through the body
- Damage hidden under a previous coating, until it’s stripped back
- Plumbing leaks, which need a plumber
Send us photos and we’ll tell you honestly.
Materials we repair
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
About our accreditations · Every repair comes with a one-year guarantee.
