Wiltshire · England
Bath Re-enamelling in Fittleton
We travel to Fittleton for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- Lots of chips and rust spots
How we handle bath re-enamelling in Fittleton
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. We regularly repair basins & shower trays, pressed steel baths and Victorian roll-tops, and people most often call us about an original cast iron bath that needs restoring and a dull, rough surface that won’t come clean.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Location
- Fittleton (SP4, SN9)
- Region
- Wiltshire
- Guarantee
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
How to look after the repair
After the repair has cured, a few habits help it last:
- Fix dripping taps quickly
- Don’t use the bath until it has fully cured
- Do not leave bottles, razors or sponges standing on the surface
- Get any chip repaired quickly
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
What affects the price in Fittleton
Prices start from £350. We price every job individually, from your pictures. What matters most is:
- The size and number of damaged areas
- Whether old repairs or coatings need taking off
- Where the damage is and how we get to it
- The colour and finish to match
Compared with replacing, repairing usually costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
How to get a fixed price
A couple of clear pictures is all it takes. Try to include:
- A close-up of the damage, in focus
- Daylight if possible, and no flash reflection
- What it’s made of, if you know
- A picture taken from further back
To get a price, send two or three photos using our quote form or call us. We will tell you honestly if a repair is the right fix.
What we’re called out for in Fittleton
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
Keep an eye out for any of the following:
- A coating lifting around the plughole
- Thin, worn enamel in places
- A bath in a colour that no longer suits
- Several chips and rust patches
Comparing quotes
- What prep work is covered
- What aftercare is recommended
- How long it needs to cure
- Whether the colour is mixed to match
What happens on the day
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take most of the day. We tidy up before we leave and tell you when it’s ready to use.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Let us know if it has been repaired before
- Move bottles, mats and clutter away from the area
- Keep children and pets away from the room on the day
Get a quote
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.
Read more
Landlord and trade work in Fittleton
Landlords, letting agents and housing providers in Fittleton use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Places near Fittleton
Also in Fittleton
Honest limits
To be straight with you, some problems need a different fix:
- Plumbing leaks, which need a plumber
- A metal bath with a through crack
- Damage hidden under a previous coating, until it’s stripped back
Not sure? Send pictures and we’ll give you a straight answer.
What we work on
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
Questions from Fittleton
Will the price change on the day?
Your quote covers the damage in the photos. If there’s more, we’ll tell you before starting.
Will there be fumes?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Can you fix a peeling bath coating?
Yes. Removing the old finish takes extra time, which we include in the price.
It’s been repaired before. Can you still fix it?
Normally, yes. We remove the old repair before doing a new one.
Do you resurface freestanding baths?
Yes. Inside and out if you’d like.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Are there extra charges for Fittleton?
No. Our quotes include travel, with the same prices everywhere we work.
Is a repair better than a new one?
Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we will tell you.
About Fittleton
Fittleton is about 5 miles north of Amesbury, in Wiltshire. Wherever you are in the SP4 postcode area, we come to you. Our repair technicians cover all 425 towns and villages in Wiltshire. You can also see our page for London, about 75 miles away.
We cover every part of SP4 and SN9 and the streets around it. You’ll find streets such as Mill Road, Hales Road and Thorne Road, all of which we cover. With the A345 close by, Fittleton is simple for us to get to. We also cover the places around Fittleton: Haxton (1 mile south-east), Netheravon (1 mile south), Coombe (1 mile north-east), Littlecott (1 mile north) and Figheldean (2 miles south). We also work in nearby towns such as Salisbury (12 miles south), Devizes (11 miles north-west), Amesbury (5 miles south), Marlborough (12 miles north), Bugmore (13 miles south) and Milford (12 miles south).
Local landmarks in Fittleton
Typical jobs here are in homes near Church of All Saints, All Saints CofE Primary School and The Dog and Gun pub and the streets around them.
About our accreditations · Every repair comes with a one-year guarantee.
