Monmouthshire · Wales
Bath Re-enamelling in Llanbadoc
Full bath re-enamelling and resurfacing for homes and businesses in Llanbadoc and across Monmouthshire. Free, fixed quotes from your photos.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- A coloured bath you want in white
Llanbadoc questions
What areas do you cover?
Everywhere in the UK, Llanbadoc included. Travel is included in the price.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Do you charge for travel?
We don’t add a call-out fee. The fixed quote covers the visit and the work.
Does the bath have to be removed?
No. We resurface it in place, so the tiles and taps stay put.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Someone resurfaced my bath and it’s peeling. Can you help?
Typically, yes. We strip the failing coating and resurface it properly. Mention it when you send photos.
About our bath re-enamelling in Llanbadoc
Re-enamelling is a one-day job for most baths, and you can use the bath the day after. Taps, tiles, panels and plumbing all stay in place. Our technicians work on acrylic baths, Victorian roll-tops and cast iron baths, and people most often call us about chips and rust in more than one place and a coating lifting around the plughole.
You are covered after we leave: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Where
- Llanbadoc (NP15)
- Area hub
- Monmouthshire
- Warranty
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Repairs by material
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
If you’re set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
About Llanbadoc
Llanbadoc is about 6 miles east of Pontypool, in Monmouthshire. Anywhere in NP15, we come to you. Llanbadoc is one of 115 towns and villages in Monmouthshire where we work. We work right across the region, from Llanbadoc to Birmingham (69 miles away).
We cover every part of NP15 and the streets around it. We regularly work on streets such as Chepstow Road, Black Barn Lane and Old Market Street and the roads around them. With the A472 close by, Llanbadoc is simple for us to get to. Neighbouring places we cover include Llangybi (2 miles south), Ton (3 miles south), Coed-y-paen (3 miles west), Llandegveth (4 miles south-west) and Llanfrechfa (5 miles south-west). Larger places within reach include Chepstow (11 miles east), Abergavenny (10 miles north-west), Monmouth (11 miles north-east), Cil-y-coed (10 miles south-east), Pen-y-pound (10 miles north-west) and Bulwark (11 miles south-east).
Local landmarks in Llanbadoc
In Llanbadoc, that means homes near St Madoc's Church, The Royal Hotel and Usk Church in Wales Primary School and the streets around them. Llanbadoc’s nearest station is Pontypool and New Inn station, about 4.7 miles west. Other landmarks nearby include Grange University Hospital (5.2 miles south-west) and Twyn Bell Camp (within half a mile west). Open spaces near Llanbadoc include Ty-mawr Hill.
How we price bath re-enamelling
Prices start from £350. You will know the full cost before you book. We take into account:
- Access to the area
- Doing more than one item at once
- The type of damage
- Whether old repairs or coatings need taking off
We don’t add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed quote
Good photos mean an accurate price. Here’s what we find most useful:
- Whether it’s been repaired or coated before
- One picture of the whole bath
- Where you are, by postcode
- Good light, ideally daylight, without flash glare
There is no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
What we are called out for in Llanbadoc
Many baths we resurface have simply been well used, with nothing wrong except the surface. Underneath, a cast iron or steel bath is normally as strong as ever.
Look out for these signs:
- A coloured bath you want in white
- Stains that will not shift
- Thin, worn enamel in places
- Lots of chips and rust spots
Comparing quotes
- What the guarantee covers, and for how long
- How the colour is matched
- How changes to the job are handled
- A fixed quote, and whether VAT is included
What we cannot put right
Some jobs are not right for a repair, for example:
- Holes rusted through the metal
- Anything hidden under an old coating, until we remove it
- Leaks from fittings rather than the bath
Send us pictures and we will tell you honestly before booking.
What we work on
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
The process
Nothing needs to be moved out of the room. We bring everything we need with us, lay protective sheets and start once you’re happy with the plan. It generally takes the best part of a day, and you are welcome to carry on with your day while we work.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Point us to the nearest place to park
- Let us know about parking or access
Ask for a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
Related advice
Work for landlords and builders
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Also near Llanbadoc
Also in Llanbadoc
Repairing versus replacing in Llanbadoc
Replacing a bath normally involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
Why book with us
- Honest advice, even when it means no job
- No need to remove anything
- Most jobs done in one visit
- Colours mixed by hand to suit your surface
See our pricing or resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
