Monmouthshire · Wales
Bath re-enamelling & resurfacing in Llangwm, Monmouthshire
Bath re-enamelling in Llangwm without the cost of replacing. Send us photos for a fixed quote, then book a visit.
- Resurfacing from £350
- A coloured bath you want in white
- An original cast iron bath that needs restoring
About our bath re-enamelling in Llangwm
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, and we take our time over it. Whether it’s a bath in a colour that no longer suits and an old resurfacing that’s failing, we can help, on cast iron baths, pressed steel baths and basins & shower trays alike.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Area
- Llangwm (NP15)
- Area hub
- Monmouthshire
- Warranty
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
About Llangwm
Llangwm is about 8 miles north-west of Chepstow, in Monmouthshire. We travel to homes and businesses in Llangwm, so there is no workshop to go to. We work in 115 places across Monmouthshire, from the larger towns to small villages. Our jobs stretch from Llangwm to Birmingham (about 67 miles away).
All of NP15 is within our area, from the main roads to the quietest streets. Close by, we cover Gaer-fawr (1 mile south-east), Llantrisant Fawr (2 miles south-west), Llanvaches (5 miles south), Parc-Seymour (5 miles south) and Coedycaerau (6 miles south-west). Larger places within reach include Chepstow (8 miles south-east), Abergavenny (12 miles north-west), Monmouth (9 miles north-east), Cil-y-coed (8 miles south-east), Pen-y-pound (12 miles north-west) and Bulwark (8 miles south-east).
What’s near Llangwm
Locally, our jobs take us to homes close to St John's Church. Well-known places in the area include Rockfield Farm Motte (0.7 miles north) and Model Farm Folk Museum and Craft Centre (1.2 miles east). Green spaces nearby include Pen Ty-Wilson.
Towns and villages near Llangwm
Also in Llangwm
FAQs for Llangwm
It’s been repaired before. Can you still fix it?
Usually, yes. We remove the old repair before doing a new one, so mention it when you send pictures.
Can you quote from photos?
In nearly every case. We only ask to see it in person if the photos cannot show what we need.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
Will there be a smell?
It depends on the job, but often a little. Ventilation keeps it to a minimum.
Is there a guarantee?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Why repair rather than replace?
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the entire room anyway. Otherwise, resurfacing generally wins. Prices start from £350. We charge the same wherever you are, with no extra for Llangwm. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why us?
- One price list for the whole UK
- CHAS and Constructionline accredited
- Colour mixed on the day to match
- We leave the room as we found it
Take a look at our prices page or bath cost comparison.
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Looking after it afterwards
How the surface is treated afterwards matters. Here’s what we suggest:
- Do not leave bottles, razors or sponges standing on the surface
- Don’t let dyes or oils sit on the finish
- A dripping tap should be fixed promptly
- A quick wipe after use keeps limescale away
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
The process
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take most of the day. We tidy up before we leave and tell you when it’s ready to use.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Let us know if it has been repaired before
- Clear the area around the damage
- Plan for the room to be out of bounds to pets and children
Getting a price
There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Related advice
Landlords, agents and businesses in Llangwm
For anyone letting property in or around Llangwm, we can repair and quote for several addresses together. Send photos for each one and we’ll come back with a combined price.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we will handle the rest.
When to call us in Llangwm
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Contact us if you’ve noticed any of these:
- A peeling or bubbling previous coating
- A bath that stays dull however much you clean it
- A coloured bath you want in white
- An original cast iron bath that needs restoring
What to look for in a quote
- How your room will be protected
- What happens if the damage is worse than the pictures show
- What prep work is covered
- Whether there are any call-out or travel charges
When a repair is not the answer
We’ll always be straight with you, so here’s what a repair won’t do:
- Steel that has corroded right through
- A metal bath with a through crack
- An acrylic bath that flexes badly underfoot
Not sure? Send pictures and we will give you a straight answer before booking.
Materials we work on in Llangwm
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Basins & shower trays
Can I fix it myself?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
About our accreditations · Every repair comes with a one-year guarantee.
