Moray · Scotland
Bath Re-enamelling for Burghead homes
Bath re-enamelling across Burghead and nearby, done in a single visit in most cases.
- Resurfacing from £350
- A roll-top that’s seen better days
- A dull, rough surface that won’t come clean
Repairing versus replacing in Burghead
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, a repair is normally a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
Why book with us
- We’ll tell you if it’s not worth repairing
- Everything repaired in place
- Colours mixed by hand to suit your surface
- No extra charge for your area
Read our prices page and bath cost comparison.
Bath re-enamelling in Burghead, done in place
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. Our technicians work on Victorian roll-tops, acrylic baths and cast iron baths, and common reasons people contact us are several chips and rust patches and brown or grey marks that don’t clean off.
All our work is covered by our one-year guarantee.
- Area
- Burghead (IV30)
- County
- Moray
- Cover
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
How we price bath re-enamelling
Prices start from £350. There’s no charge for travel to Burghead. The price depends on:
- How many areas need work
- What kind of damage it is
- Doing more than one item at once
- Where the damage is and how we get to it
The price reflects the work involved, not where you live. You will see the full price before you book.
Getting a price from pictures
You can typically get a fixed quote without us visiting. To help us price it:
- A picture taken from further back
- The postcode, so we can plan the visit
- A clear, close picture of the problem area
- The material, if you know it
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you will get a fixed price back. There is no charge for the quote and you’re under no obligation.
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
How it works
Arrival times are agreed in advance, so you know when to expect us. On site, it takes most of the day. We leave the room clean and you will know when it can be used.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Have somewhere for us to park nearby if possible
- Ensure the area is dry
- Tell us about parking, stairs or access
Get a quote
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them to us. You will get a fixed price, not an estimate.
Read more
Honest limits
Before booking, it’s worth knowing the limits too:
- A cast iron or steel bath that’s cracked right through
- A bath that’s rusted through
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send pictures and we will give you a straight answer before you book.
Materials we work on in Burghead
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
Places near Burghead
More services for Burghead
Burghead: your questions answered
How long is the bath unusable?
Generally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Do you resurface freestanding baths?
Yes, often. We resurface the inside, and the outside can be refinished too.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Do you cover Burghead?
We do. We send a technician to Burghead for every job, and the price is the same as everywhere else.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
What happens once I’ve sent pictures?
We check the damage, the material and your postcode, then reply with a quote.
How do I get a price for bath re-enamelling in Burghead?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
What we’re called out for in Burghead
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
If you can see any of these, send us a photo:
- A coating lifting around the plughole
- Several chips and rust patches
- A bath that stays dull however much you clean it
- Staining under the taps and around the waste
Comparing quotes
- Whether the colour is mixed to match
- Aftercare advice
- Whether there are any call-out or travel charges
- What protection goes down before work starts
Aftercare tips
To keep it looking its best:
- Respect the curing time we give you
- Stick to gentle, non-abrasive cleaners
- Fix dripping taps quickly
- Wash away dyes and oils after use
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Landlord and trade work in Burghead
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
Our work in Burghead
Burghead is about 7 miles north-west of Elgin, in Moray. Book a date that suits you, and you’ll know when to expect us, so there is no waiting around. Our repair technicians cover 58 places across Moray, from the larger towns to small villages.
Every address in IV30 is covered, from the main roads to the quietest streets. From Station Road, Kinloss Street and Mcdonald Crescent or anywhere nearby, a technician can come to you. You’ll find Burghead on the B9013 and B9040, so it’s easy for us to reach. Neighbouring places we cover include Cummingston (1 mile east), Backlands (2 miles east), Hopeman (2 miles east), College of Roseisle (2 miles south-east) and Duffus (3 miles east). We also work in nearby towns such as Elgin (7 miles south-east), Forres (8 miles south-west), Lossiemouth (7 miles east), Ashgrove (8 miles south-east), Lhanbryde (11 miles south-east) and Kinloss (5 miles south-west). Burghead is among the bigger towns we cover in Moray. For island and remote addresses, call first so we can plan the visit.
Landmarks near Burghead
In Burghead, that means homes near Burghead and the streets around them. Further afield, we also cover the area around Inverugie Castle (2.3 miles east).
About our accreditations · Every repair comes with a one-year guarantee.
