Redcar and Cleveland · England
Bath re-enamelling & resurfacing in Mickleby, Redcar and Cleveland
We travel to Mickleby for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Chips and rust in more than one place
- A period or roll-top bath worth keeping
Mickleby and nearby
Mickleby is about 6 miles west of Whitby, in Redcar and Cleveland. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in 48 places in Redcar and Cleveland, from the larger towns to small villages. Our nearest city page is Newcastle upon Tyne, about 48 miles away.
Postcode districts we cover here: TS13. Jobs here include addresses on The Lane, Mickleby Lane and West Lane and the roads around them. Other places close to Mickleby include Ellerby (1 mile north), West Barnby (1 mile east), East Barnby (2 miles east), Newton Mulgrave (2 miles north-west) and Runswick Bay (2 miles north). Further out, we also cover Redcar (14 miles north-west), Guisborough (12 miles west), Marske-by-the-Sea (12 miles north-west), Skelton-in-Cleveland (10 miles north-west), Skelton (10 miles north-west) and Brotton (8 miles north-west).
Near you in Mickleby
For rail, the closest station is Lealholm station, roughly 4.1 miles south-west. A little further out are Whitby Hospital (6 miles east) and Mulgrave Castle (2.5 miles east). For a walk, there is Danby Beacon.
Bath re-enamelling in Mickleby without replacing anything
Re-enamelling is a one-day job for most baths. Nothing is disconnected or removed. Whether it’s several chips and rust patches and stains that won’t shift, we can help, on Victorian roll-tops, cast iron baths and acrylic baths alike.
We stand behind the work with a one-year guarantee.
- Area
- Mickleby (TS13)
- County
- Redcar and Cleveland
- Warranty
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What affects the price in Mickleby
Prices start from £350. You’ll know the full cost before booking. We take into account:
- Access to the area
- What kind of damage it is
- Whether old repairs or coatings need taking off
- The material
A repair usually costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
How to get a fixed price
It only takes a minute to photograph the damage. Please include:
- A wider photo showing the whole bath
- Natural light rather than flash
- Whether it’s been repaired or coated before
- A clear, close picture of the problem area
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Common questions in Mickleby
How much does bath re-enamelling cost in Mickleby?
Prices start from £350. We give a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.
Is it safe with children and pets around?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders across Redcar and Cleveland.
Do you work in Mickleby?
Yes. We work across the UK and come to Mickleby. Send us pictures for a fixed quote, or call 0345 017 0787.
Is there a guarantee?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Send pictures of everything together and you will get one combined price.
Do you resurface freestanding baths?
Yes. Inside and out.
Aftercare tips
Most damage we see is avoidable. These habits help:
- Do not leave a chip unrepaired
- Wash away dyes and oils after use
- Fix dripping taps quickly
- A quick wipe after use keeps limescale away
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
How it works
We agree an arrival time beforehand. Once we’re there, the work takes most of the day in most cases. We leave the room clean.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the day after, the bath is ready.
Before we arrive
- Tell us if there are stairs or a lift
- Tell us about any previous repairs or coatings
- Have a window or extractor fan available
Ask for a price
For a price in Mickleby, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Advice
Also near Mickleby
What else we do in Mickleby
Repairing versus replacing in Mickleby
Replacing a cast iron bath is a big job: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Why us?
- Straight answers about what a repair can do
- A fixed quote before you book
- Everything repaired in place
- Colours mixed by hand to suit your surface
Take a look at our full price list and guide to resurfacing and replacement costs.
Landlord and trade work in Mickleby
We work for landlords, letting agents and housing providers in Mickleby as well as homeowners. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Honest limits
Before you book, it’s worth knowing the limits too:
- A cast iron or steel bath that is cracked right through
- Plumbing leaks, which need a plumber
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send photos and we will say what we think.
Materials we work on in Mickleby
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
What we’re called out for in Mickleby
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
You may need us if you’ve spotted any of these:
- Lots of chips and rust spots
- A dull, rough surface that won’t come clean
- An original cast iron bath that needs restoring
- A peeling or bubbling previous coating
Comparing quotes
- What happens if the damage is worse than the pictures show
- Whether they match the colour on site
- How your room will be protected
- Whether a trained technician does the job
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
About our accreditations · Every repair comes with a one-year guarantee.
