Cambridgeshire · England
Bath re-enamelling & resurfacing in Mill Green, Cambridgeshire
Full bath re-enamelling and resurfacing in Mill Green, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Chips and rust in more than one place
- A peeling or bubbling previous coating
About Mill Green
Mill Green is about 3 miles west of Haverhill, in Cambridgeshire. We agree a date that works for you, and we’ll give you an arrival time in advance, so there’s no waiting around. Our technicians cover 371 places across Cambridgeshire. We work right across the region, from Mill Green to London (45 miles away).
Every address in CB21 is within our area, from the main roads to the quietest streets. If you’re just outside Mill Green, we cover Shudy Camps (1 mile south-west), Cardinal's Green (1 mile north), Castle Camps (1 mile south-east), Steventon End (2 miles south-west) and Bartlow (2 miles west). Within a short drive, we also cover Cambridge (13 miles north-west), Newmarket (11 miles north), King's Hedges (14 miles north-west), Arbury (14 miles north-west), Chesterton (13 miles north-west) and Orchard Park (15 miles north-west).
Near you in Mill Green
Our customers here include homes close to Church of St Mary and the streets around them. A little further out are Castle Camps (1.8 miles south) and Bartlow End (2.5 miles south-west). For a walk, there’s Hales and Shadwell Woods and Rivey Hill.
About our bath re-enamelling in Mill Green
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. We work on Victorian roll-tops, basins & shower trays and pressed steel baths, and the jobs we see most are stains that won’t shift and a bath that stays dull however much you clean it.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.
- Area
- Mill Green (CB21)
- Area hub
- Cambridgeshire
- Guarantee
- One year on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What affects the price in Mill Green
Resurfacing from £350. A fixed quote means you know the cost before you book. We look at:
- The type of damage
- What the surface is made of
- The size and number of damaged areas
- Any earlier repairs that need removing first
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
How to get a fixed price
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- Daylight if possible, and no flash reflection
- A photo taken from further back
- Whether it’s been repaired or coated before
- One sharp close-up of the damage
Send us a picture of the damage and a wider shot of the entire item, and tell us you are in Mill Green, and we’ll come back with a fixed quote.
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
Common questions in Mill Green
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
What happens if you find more damage?
The price is fixed for what the photos show. If there’s more, we will tell you before starting.
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Cambridgeshire.
How quickly can you book me in?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
How much does bath re-enamelling cost in Mill Green?
Resurfacing from £350. Because every job differs, we price from pictures. You’ll get a fixed figure before you book.
Will the new finish last?
Care for it and it lasts. Avoid abrasive cleaners and suction mats.
Do you come to Mill Green?
Yes. We cover the whole UK and travel to Mill Green. Send photos and we will quote, or call 0345 017 0787.
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
Looking after it afterwards
Looking after the surface is easy, and it makes a real difference:
- Wipe the bath dry after use in hard water areas
- Use washing-up liquid and a soft cloth
- Don’t use the bath until it has fully cured
- Repair dripping taps early
A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
What happens on the day
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take the best part of a day. We tidy up before we leave and tell you when it’s ready to use.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Plan for the room to be out of bounds to pets and children
- Tell us about any previous repairs or coatings
- Ensure the area is dry
Ask for a price
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Advice
Places near Mill Green
Also in Mill Green
What we are called out for in Mill Green
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
You may need us if you’ve spotted:
- Stains that won’t shift
- A period or roll-top bath worth keeping
- A dull, rough surface that won’t come clean
- A coloured bath you want in white
What your quote should include
- When it can be used again
- What protection goes down before work starts
- Whether a trained technician does the job
- Aftercare advice
Repairing versus replacing in Mill Green
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you are refitting the whole room anyway. In most other cases, resurfacing is the better choice. Prices start from £350. There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- We come to you, anywhere in the UK
- Colour mixed on the day to match
- No extra charge for your area
- Fixed prices from your photos
See our full price list and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
