Wiltshire · England
Bath Re-enamelling in Milston
Full bath re-enamelling and resurfacing in Milston, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- A coloured bath you want in white
Bath re-enamelling at your home in Milston
The bath stays where it is, so the taps, tiles and plumbing are not touched. It typically takes one visit, and can be used again the day after. Typical jobs include a coating lifting around the plughole and several chips and rust patches, on pressed steel baths, basins & shower trays and acrylic baths.
All of our repairs are guaranteed for twelve months in Milston and everywhere else. If something goes wrong with the work, we come back.
- Where
- Milston (SP4)
- Area hub
- Wiltshire
- Warranty
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Work for landlords and builders
For anyone letting property in or around Milston, we’ll quote for several properties at once. Send pictures for each one and we’ll price them together.
Housing associations and facilities teams use us for planned and reactive repairs in Wiltshire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
FAQs for Milston
Do the materials smell?
There may be a mild smell during the work.
What information do you need?
Use the quote form or ring 0345 017 0787.
Can pets and children be at home?
Keep pets and children away from the work area on the day.
Will the bath be moved?
Not at all. We work on the bath in place, with the room protected and ventilated.
Can landlords book you?
Yes, often. We can quote for several properties together and work between tenancies.
Can you repair something that’s been repaired before?
Yes, regularly. It can add a little time, which we include in the quote.
When can you do it?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What we cannot put right
We would rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- A poorly supported acrylic bath, until it’s firmed up
- A metal bath with a through crack
- A bath that’s rusted through
If in doubt, send pictures and we will say what we think before booking.
Surfaces we repair
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
Repairs by material
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
How the visit works
We agree an arrival time beforehand, so you’re not left guessing. On site, it takes most of the day in most cases. The room is left tidy.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s normally ready the next day.
Before we arrive
- Mention any earlier repairs or resurfacing
- Point us to the nearest place to park
- Clear the area around the damage
How to get a price
Upload photos of the damage and a wider shot of the whole item, and tell us you’re in Milston, and we’ll reply with a fixed price.
Read more
Nearby places to Milston
More services for Milston
What bath re-enamelling costs
Prices start from £350. A fixed quote means you know the cost before booking. We look at:
- How easy the damage is to reach
- Whether it’s a chip, crack, burn or wear
- Whether old repairs or coatings need taking off
- Whether we combine several jobs
We charge the same wherever you are, with no extra for Milston. What changes the price is the job itself: the material, the amount of damage and how many items.
Quotes from your pictures
Two or three clear pictures are usually enough. Try to include:
- A photo taken from further back
- The postcode, so we can plan the visit
- A coin beside the damage so we can judge size
- Natural light rather than flash
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Should you replace it?
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the entire room anyway. Otherwise, resurfacing usually wins. Resurfacing from £350, with every job priced individually. The price reflects the work involved, not where you live. The full price is agreed before booking, with no extras added later.
Why us?
- No extra charge for your area
- CHAS, Constructionline and SafeContractor accredited
- Fixed prices from your photos
- We come to you, anywhere in the UK
Read our full price list and bath cost comparison.
Do you need bath re-enamelling in Milston?
Frequently the bath has just had decades of use, with nothing wrong except the surface. The body of the bath is usually perfectly sound.
It’s worth getting a quote if you see:
- A peeling or bubbling previous coating
- A bath that stays dull however much you clean it
- Brown or grey marks that don’t clean off
- An original cast iron bath that needs restoring
What your quote should include
- What preparation is included
- What aftercare is recommended
- How the room is protected while they work
- Who will actually do the work
Where we work around Milston
Milston is about 3 miles north of Amesbury, in Wiltshire. We visit clients in Milston and the surrounding area, so there is no workshop to go to. Our technicians cover 425 places in Wiltshire, from the larger towns to small villages. Our jobs stretch from Milston to London (75 miles away).
Every address in SP4 is within our area. Whether you live on Church Road and The Croft or a nearby road, we can come to you. Close by, we cover Ablington (1 mile north), Alton (1 mile north-west), Figheldean (1 mile north-west), Netheravon (2 miles north-west) and Haxton (2 miles north). Larger places within reach include Salisbury (9 miles south), Devizes (13 miles north-west), Amesbury (3 miles south), Marlborough (15 miles north), Bugmore (10 miles south) and Milford (10 miles south).
What’s near Milston
Typical jobs here are in homes near Durrington Church of England Controlled Junior School, Avon Valley College and Church of St Mary, among other places. Not far away are Beacon Hill and Winterbourne Downs RSPB reserve.
About our accreditations · Every repair comes with a one-year guarantee.
