Staffordshire · England
Bath Re-enamelling in Beffcote
Damaged bath in Beffcote? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- A roll-top that is seen better days
- Stains that won’t shift
How to look after the repair
Most damage we see is avoidable. A few tips:
- Get any chip repaired quickly
- Leave the bath for the full curing time before using it
- A quick wipe after use keeps limescale away
- Do not let dyes or oils sit on the finish
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Bath re-enamelling in Beffcote without replacing anything
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. We work on pressed steel baths, basins & shower trays and Victorian roll-tops, and people most frequently call us about a bath in a colour that no longer suits and an old resurfacing that’s failing.
You are covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Location
- Beffcote (ST20)
- Region
- Staffordshire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Landlord and trade work in Beffcote
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
Should you replace it?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Our bath re-enamelling starts from £350. A repair is priced on what needs doing, not your postcode. You’ll see the full price before booking, with nothing added on the day.
Why us?
- Dust sheets down, tidy finish
- One visit for most repairs
- CHAS, Constructionline and SafeContractor accredited
- We come to you, anywhere in the UK
Read our full price list and bath cost comparison.
What we cannot put right
Not everything can be repaired, and we would rather say so up front. We can’t fix:
- Anything hidden under an old coating, until we remove it
- A metal bath with a through crack
- Leaks from fittings rather than the bath
If in doubt, send photos and we’ll say what we think.
Materials we work on in Beffcote
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
Towns and villages near Beffcote
Other services in Beffcote
Beffcote questions
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
Can you fix a peeling bath coating?
Yes. Removing the old finish takes extra time, which we include in the price.
Is my repair covered?
Every repair comes with our one-year guarantee. We will explain what it covers when we quote.
What happens if you find more damage?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Will there be fumes?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
Beffcote and the surrounding area
Beffcote is about 4 miles east of Newport, in Staffordshire. Book a date that suits you, and you’ll know when to expect us, so you are not left waiting in all day. We cover 512 places in Staffordshire, from the larger towns to small villages. Our jobs stretch from Beffcote to Birmingham (26 miles away).
Here we cover the ST20 postcode area. Close by, we cover Coton End (1 mile north-east), Coton (1 mile north-east), Bromstead Heath (1 mile south), Moreton (1 mile south) and Bromstead (1 mile south). Further out, we also cover Stafford (8 miles east), Cannock (13 miles south-east), Rugeley (15 miles east), Stone (11 miles north-east), Hednesford (13 miles east) and Penkridge (8 miles south-east).
Landmarks near Beffcote
Further afield, we also cover the area around Aqualate Castle (2.4 miles west). Not far away are Loynton Moss and Aqualate Mere.
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
How it works
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes a full day, and we finish with a tidy-up and a look at the finished work together.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Tell us about parking, stairs or access
- Have somewhere for us to park nearby if possible
- Clear the area around the damage
Get a quote
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them over. You’ll get a fixed quote, not an estimate.
Advice
What bath re-enamelling costs
Prices start from £350. Each job gets its own fixed price. This is what makes a difference:
- Any earlier repairs that need removing first
- How hard the colour is to match
- The type of damage
- Whether we combine several jobs
Our prices are the same across the UK, so there is no premium for Beffcote. What changes the price is the job itself: how much damage, what it’s made of and how many items.
How to get a fixed price
Most quotes are done from photos alone. To help us price it:
- Something in shot to show the size
- Your postcode, so we can check dates
- The material, if you know it
- Any earlier repairs or coatings
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you will get a fixed quote back. There’s no charge for the quote and no obligation.
About our accreditations · Every repair comes with a one-year guarantee.
