Swansea · Wales

Bath re-enamelling & resurfacing in Morfa, Swansea

Bath re-enamelling in and around Morfa: photo quotes, tidy work and a year’s guarantee.

  • Resurfacing from £350
  • Brown or grey marks that do not clean off
  • Enamel that is lost its shine and feels rough
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Morfa

How we handle bath re-enamelling in Morfa

Most baths are re-enamelled in a day. Nothing is disconnected or removed. Our repair technicians work on basins & shower trays, acrylic baths and Victorian roll-tops, and people most often call us about worn patches where water runs and sits and an original cast iron bath that needs restoring.

All of our repairs are guaranteed for twelve months in Morfa and everywhere else. We return to put right any problem with the work.

Location
Morfa (SA1, SA5, SA6)
Area hub
Swansea
Warranty
A year, on every repair
Quote
From £350. Free and fixed, from your photos
Call
0345 017 0787
Updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

How the visit works

On the day itself, there is little for you to do. Show us the job, point us to the room, and we will get on with it. Most visits take the best part of a day, including clearing up.

  1. The bathroom is protected and ventilation set up.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. Chips, rust and pitting are repaired.
  4. The surface is keyed and primed for the new finish.
  5. The new finish is sprayed on in several coats and left to cure until the next day.

Preparing for the visit

  • Plan for the room to be out of bounds to pets and children
  • Mention if the room is upstairs or in a flat
  • Open a window if you can

Getting a price

To get a price, send two or three pictures using our quote form or ring us. We will tell you honestly whether it can be repaired.

Get a fixed quote

Advice

Should you replace it?

Replacing a bath normally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and usually one day, with the bath ready the following day. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we price the whole job up front. Damage, material and access decide it, and combining items on one visit brings it down.

Why Morfa customers choose us

  • Colours mixed by hand to suit your surface
  • No extra charge for your area
  • One visit for most repairs
  • We will tell you if it’s not worth repairing

Take a look at our prices page or guide to resurfacing and replacement costs.

Looking after it afterwards

Aftercare is simple:

  • Use washing-up liquid and a soft cloth
  • Get any chip repaired quickly
  • Never use suction bath mats
  • Wipe the bath dry after use in hard water areas

Dry the bath after use if possible, particularly with hard water, and rinse off any bath products.

Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.

Prices and what affects them

Prices start from £350. We give every job a fixed quote from pictures. This is what makes a difference:

  • How many areas need work
  • Whether it’s a chip, crack, burn or wear
  • How many items we do on one visit
  • Access to the area

We charge the same wherever you are, so there’s no premium for Morfa. The job itself decides the price: the material, the amount of damage and how many items.

Quotes from your photos

The better the pictures, the more accurate the price. Here’s what helps:

  • A close-up of the damage, in focus
  • Your postcode, so we can check dates
  • Good light, ideally daylight, without flash glare
  • Whether it’s been repaired or coated before

You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.

DIY kit or professional repair?

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

FAQs for Morfa

Do you do work for letting agents?

Yes. We work for landlords, agents, builders and businesses as well as homeowners across Swansea.

Do you work in Morfa?

Yes. We work across the UK and come to Morfa. Send us photos for a fixed quote, or call 0345 017 0787.

What areas do you cover?

Across the UK, so Morfa is covered. Prices do not change with location.

Can you repair several things at once?

Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.

Does someone need to be in?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

Is repairing better than replacing?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.

How long does re-enamelling last?

A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.

Can I get a quote without a visit?

Normally, yes. Clear pictures let us give you a fixed quote without visiting.

Our work in Morfa

Morfa is about 1 mile north-east of Swansea, in Swansea. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Morfa is one of 153 places in Swansea where we work.

All of SA1, SA5 and SA6 is covered, from the main roads to the quietest streets. We regularly work on streets such as Siloh Road, Eaton Road and Salem Road. We also cover the places around Morfa: Landore (1 mile south), Penfilia (1 mile north-west), Brynhyfryd (1 mile west), Plasmarl (1 mile north-east) and Lisbon (1 mile north-west). Within a short drive, we also cover Gorseinon (5 miles west), Llwchwr (5 miles west), Mumbles (5 miles south-west), Norton (5 miles south-west), Tycoch (3 miles south-west) and Clydach (4 miles north-east).

What’s near Morfa

Locally, our jobs take us to homes close to Pentrehafod School, Brynhyfryd Primary School and Siloh Welsh Congregational Chapel. Other local landmarks include Dynevor School (1.5 miles south), Cwm Level Park (within half a mile north) and The Station Inn (within half a mile west). The closest station to Morfa is Swansea station, roughly 1.2 miles south. Other landmarks nearby include Mount Pleasant Hospital (1.3 miles south) and Original Swansea Castle (1.5 miles south). Not far away are Cnap-llwyd and Pluck Lake.

Map of Morfa © OpenStreetMap contributors

Signs you need bath re-enamelling in Morfa

Frequently the bath has just had decades of use. Underneath, a cast iron or steel bath is generally as strong as ever.

The most common problems we are called about are:

  • A bath in a colour that no longer suits
  • Stains that won’t shift
  • Several chips and rust patches
  • An original cast iron bath that needs restoring

Before booking anyone

  • How long the guarantee is and what it covers
  • How your room will be protected
  • Whether they match the colour on site
  • Who will actually do the work

10 questions to ask before you book

Landlords, agents and businesses in Morfa

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.

For anyone letting property in or around Morfa, we’ll quote for several properties at once. Just send photos for each address and we will come back with a combined price.

What your bath is made of matters

Cast iron

Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.

Pressed steel

Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.