Perth and Kinross · Scotland
Bath re-enamelling & resurfacing in Tullibardine, Perth and Kinross
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Tullibardine. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Thin, worn enamel in places
About our bath re-enamelling in Tullibardine
The bath stays where it is, so your taps, tiles and plumbing are left alone. It typically takes one visit, with the bath ready to use the following day. We work on acrylic baths, basins & shower trays and pressed steel baths, and the jobs we see most are a bath that stays dull however much you clean it and wear marks under the taps.
All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.
- Where
- Tullibardine (PH3)
- County
- Perth and Kinross
- Cover
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Repairing versus replacing in Tullibardine
Replacing a bath normally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and generally one day, and the bath can be used the day after. Prices start from £350. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Why Tullibardine clients choose us
- We come to you, anywhere in the UK
- We will tell you if it’s not worth repairing
- Colour mixed on the day to match
- Most jobs done in one visit
Take a look at our full price list and bath cost comparison.
How it works
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a full day. We clean up when we are done and tell you when it’s ready to use.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Getting ready for the visit
- Keep a parking space free if you can
- Mention any parking restrictions or tricky access
- Mention any earlier repairs or resurfacing
How to get a price
Email us a picture of the damage and one of the whole item, with your PH3 postcode, and we will reply with a fixed quote.
Advice
Nearby places to Tullibardine
What else we do in Tullibardine
What a repair can’t fix
Before booking, it’s worth knowing the limits:
- Plumbing leaks, which need a plumber
- A bath split right through the body
- Anything hidden under an old coating, until we remove it
Not sure? Send pictures and we will give you a straight answer.
Materials we work on in Tullibardine
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
Keeping it looking good
Looking after the surface is easy:
- Stick to gentle, non-abrasive cleaners
- Repair dripping taps early
- Keep toiletries on a shelf rather than in the bath
- Do not use the bath until it has fully cured
Stick to mild, non-abrasive cleaners, do not use suction bath mats, and don’t leave bottles or razors standing on the surface.
On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.
Different materials, different repairs
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Tullibardine and nearby
Tullibardine is about 13 miles south-west of Perth, in Perth and Kinross. From the centre of Tullibardine to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We cover 107 places in Perth and Kinross, from the larger towns to small villages. Our jobs stretch from Tullibardine to Edinburgh (about 32 miles away).
Every address in PH3 is within our area. If you’re just outside Tullibardine, we cover Auchterarder (2 miles south-east), Blackford (3 miles south-west), Aberuthven (4 miles east), Muthill (4 miles north-west) and St David's (4 miles north). Larger places within reach include Perth (13 miles north-east), Crieff (6 miles north-west), Kinross (14 miles south-east), Letham (12 miles north-east), Scone (15 miles north-east) and Tulloch (13 miles north-east).
What’s near Tullibardine
In Tullibardine, that means homes near Community School of Auchterarder, among other places. For rail, the closest station is Gleneagles station, roughly 2.2 miles south. Further afield, we also cover the area around St Margaret's Hospital (1.3 miles south-east) and Tullibardine Castle (0.8 miles west). The countryside around Tullibardine includes Pond of Drummond.
What bath re-enamelling costs
Resurfacing from £350. You will not pay by the hour. The price is based on:
- The type of damage
- The size and number of damaged areas
- Whether old repairs or coatings need taking off
- What the surface is made of
The price reflects the work involved, not your postcode. The full price is agreed before booking.
How to get a fixed price
You can typically get a fixed quote without us visiting. To help us price it:
- One sharp close-up of the damage
- A photo taken from further back
- Daylight if possible, and no flash reflection
- The material, if you know it
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. You’ll get a fixed price, not an estimate.
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
Common questions in Tullibardine
Can you do more than one item on the same visit?
Of course, and it typically saves money. Just add the extra items to your pictures and we will quote them together.
How long will the bath be out of use?
Generally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Does the bath have to be removed?
Not at all. We work on the bath in place, with the room masked and ventilated.
Will the new finish last?
Look after it and it lasts. Gentle cleaning, no suction mats.
Can you price it without visiting?
Generally, yes. A close-up and a wider photo are enough to give a fixed price.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted.
What happens next?
We check the damage, the material and your postcode, then reply with a quote.
How much does bath re-enamelling cost in Tullibardine?
Resurfacing from £350. We give a fixed price based on photos of the damage. Send a close-up and a picture of the entire item and your postcode.
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs in Perth and Kinross and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
About our accreditations · Every repair comes with a one-year guarantee.
