Flintshire · England

Bath Re-enamelling for Nercwys homes

Fixed-price bath re-enamelling in Nercwys and the surrounding area, done in a single visit in most cases and guaranteed for a year.

  • Resurfacing from £350
  • A roll-top that’s seen better days
  • A coloured bath you want in white
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Nercwys?

About our bath re-enamelling in Nercwys

A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. Whether it’s stains that won’t shift and a roll-top that’s seen better days, we can typically put it right, whatever the material.

Big or small, you get the same one-year guarantee.

Basin with yellowed glaze resurfaced to a clean white finish
Area
Nercwys (CH7)
County
Flintshire
Cover
12 months on all our work
Price
From £350. Free, fixed quote from pictures
Phone
0345 017 0787
Last updated
23 October 2026

Can I fix it myself?

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

Different materials, different repairs

Cast iron

Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.

Acrylic

Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.

Where we work around Nercwys

Nercwys is about 3 miles south-west of Bwcle, in Flintshire. Whether you’re in the middle of Nercwys or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. We cover 139 places in Flintshire, from the larger towns to small villages. We work right across the region, from Nercwys to Liverpool (about 21 miles away).

Here we cover the CH7 postcode area. Local streets include Ffordd Pen y Bryn and Ffordd y Pentre. If you’re just outside Nercwys, we cover Gwernymynydd (2 miles north-west), Treuddyn (2 miles south-east), Pentre (2 miles south), Mold (2 miles north) and Maeshafn (2 miles west). Within a short drive, we also cover Connah's Quay (6 miles north-east), Buckley (3 miles north-east), Bwcle (3 miles north-east), Flint (7 miles north), Saltney (10 miles east) and Holywell (10 miles north).

What’s near Nercwys

Locally, our jobs take us to homes close to Nercwys CIW Voluntary Aided Primary School, White Lion Inn and St Mary's Parish Church. For rail, the closest station is Penyffordd station, about 3.7 miles east of the centre. Other landmarks nearby include Mold Library and Museum (2.1 miles north) and Castell Placename (0.6 miles south-west). Not far away are Pen Celyn and Padeswood Pool.

Map of Nercwys © OpenStreetMap contributors

Common problems we fix in Nercwys

Enamel does not fail overnight. Years of cleaning, hard water and hot baths wear the gloss away, usually first under the taps and around the waste.

Get in touch if you’ve noticed any of these:

  • Worn patches where water runs and sits
  • A roll-top that is seen better days
  • Brown or grey marks that don’t clean off
  • A coloured bath you want in white

What to look for in a quote

  • Whether the price is fixed and includes VAT
  • Who turns up on the day
  • Aftercare advice
  • The length of the guarantee and what it covers

Choosing a repair company

Looking after it afterwards

A little care keeps the finish looking good. We recommend:

  • Get any chip repaired quickly
  • A quick wipe after use keeps limescale away
  • Fix dripping taps quickly
  • Wash away dyes and oils after use

Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.

Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.

Your questions about bath re-enamelling in Nercwys

Can you make a coloured bath white?

Yes, most people go for white. Mention the colour you want when you send photos.

How much does bath re-enamelling cost in Nercwys?

Prices start from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.

Are there extra charges for Nercwys?

Travel is included in the price, with the same prices everywhere we work.

Are you accredited?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Do you need to take the bath out?

No, it stays where it is. We work on the bath in place, with the room protected and ventilated.

Do the materials smell?

There can be some smell while we work, which is why we ventilate. It fades as everything cures.

Which areas do you work in?

Everywhere in the UK, Nercwys included. There is no extra charge for travel.

Will it make a mess?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

How it works

Visits start with a quick look at the job together. Then the area is sheeted and masked and we start. It normally takes the best part of a day, and we’ll tell you if anything changes.

  1. We sheet, mask and ventilate the room.
  2. We remove the old silicone and deep clean the bath.
  3. Chips, rust and pitting are repaired.
  4. We key the bath and apply a bonding primer.
  5. The new finish is sprayed on in several coats and left to cure until the next day.

Preparing for the visit

  • Avoid using the area for a few hours before we arrive
  • Make sure the room can be ventilated
  • Clear toiletries, mats and anything else from around the area

Getting a price

If you’re in Nercwys and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Send pictures for a quote

Advice

What a repair can’t fix

In fairness, some problems need a different fix:

  • Steel that has corroded right through
  • A poorly supported acrylic bath, until it’s firmed up
  • Leaking taps or wastes (a plumber’s job)

Not sure? Send pictures and we’ll give you a straight answer.

Materials we repair

  • Victorian roll-tops
  • Basins & shower trays
  • Acrylic baths
  • Pressed steel baths
  • Cast iron baths

How we price bath re-enamelling

Prices start from £350. We charge the same across the UK, including Nercwys. What changes the price is:

  • Any earlier repairs that need removing first
  • The material
  • How much damage there is
  • The type of damage

A repair generally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.

Quotes from your photos

When you take your pictures, a few simple things make all the difference:

  • Where you are, by postcode
  • The material, if you know it
  • Good light, ideally daylight, without flash glare
  • A close-up of the damage, in focus

Upload a picture of the damage and a wider shot of the entire item, and tell us you are in Nercwys, and we will come back with a fixed quote.

Repair or replace in Nercwys?

A refit takes several trades and several days. Re-enamelling takes one technician and normally one day, with the bath ready the day after. Prices start from £350. The price reflects the work involved, not your postcode. The full price is agreed before you book, with nothing added on the day.

Why us?

  • Rooms protected and left tidy
  • Colours mixed by hand to suit your surface
  • No extra charge for your area
  • A year’s guarantee on all work

See our full price list and resurfacing vs replacement cost guide.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.